Orodni rezalnik

MIOTAL® WFM 400M

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Dcsdepy Eldepfx Afqer Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988,

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt including substructure. Dimensions: 6000 + 620 x 105 mm Djdpfx Aod Ra Uajfqjcr Conveyor belt width: 500 mm PVC conveyor belt with cleats, sidewall, and sealing tape included. V2A stainless steel feed hopper at the beginning of the conveyor belt. * Optionally available with magnetic deflection roller at the end of the conveyor belt. * Optionally available as an incline conveyor. * Custom designs in all configurations possible.

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Leto izdelave 2007 Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Dcedpfx Aswm Rqajfqsr Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Na voljo več slik

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Dcsdpfevrckqex Afqer Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm Dcsdpfxoup Hw Es Afqer - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.500 kg, Stroj se lahko testira pod napetostjo. Djdpfxew Idwzj Afqscr

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm Dodjvambcjpfx Afqocr >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m Dcjdpfxst Hwzie Afqor J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, obratovalne ure: 750 h, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, NUMERISCH GESTEUERTE OPTISCHE SCHLEIFMASCHINE FÜR NASS- UND TROCKENSCHLEIFEN Dies ist eine Sonderausführung der Schleifmaschine von AMADA (WASINO) GLS 150 G-LED. Alle Achsen der Maschine sind motorisiert und verfügen über Linearmotor-Antrieb. Eignet sich sowohl für Flach- als auch Rotationsschliff und ist speziell für Werkzeugbauabteilungen zur Bearbeitung von Hartmetall-, Cermet- und gehärteten Werkstoffen konzipiert. Umfangreiche Zusatzausstattung: Maschinenschraubstock, CBN- und Diamant-Schleifscheiben sowie weiteres Zubehör... GRUNDAUSSTATTUNG: - Hauptspindel: 5.000 U/min - CNC-interpolierbarer Schwenkkopf - Programmierbarer Linearhub (Kopf) - Radial-/Axialachse (Kopf) gesteuert - Zusätzlicher NC-gesteuerter Hub (Tisch) - Bedien- und erweitertes Bedienfeld - CCD-Kamera-Messsystem - Softwarepaket - Äußere Konturprogrammierung CNC-SCHWENKKOPF: Nahtloses Konturschleifen mit einem CNC-interpolierbaren und prozessintegriert schwenkbaren Schleifkopf. Der programmierbare Schwenkwinkel minimiert Kollisionen zwischen Schleifscheibe und Werkstück im Automatikbetrieb, inkl. CNC-Schwenkfunktion. - 3-achsige synchrone Bewegung für automatisches Nullpunkt-Positionieren - Makrofunktionen - Verwaltung von bis zu 5 Schleifscheiben - Schwenkbereich +/-15° LINEARHUB (Kopf): - Spindelhub über Linearmotor, Spindelposition (Schleifscheibe) programmierbar inkl. Software - NC-gesteuerte Kopfachsen - Einstellbarer axialer Freiwinkel - Einstellbarer radialer Freiwinkel TISCH (Hub): - Gesteuerter und programmierbarer Tischarbeitsweg Inkl. Software für Tisch-Teach-in-Funktion - Erweitertes Bedienfeld - 15" Touchscreen mit zusätzlicher Tastatur (Bedienung), Windows-Betriebssystem - CNC-Steuerung: FANUC F-32i-GT, CE-Zertifizierung für Europa CCD-KAMERAS: - Darstellung der CAD-Kontur (DXF) Dedpfx Asr Avaqsfqecr - Vergrößert das Projektorbild bis zu 1.000-fach - Vergrößerung der optischen Kontur mittels Lupe bis zu 1.000-fach - Differenzmessung zwischen CAD-Kontur und Werkstück nach Achsbewegung - Inklusive Software WinWop SOFTWARE: - Konturprogrammierungssoftware Windows-basierte Lösung zur Erstellung freier Geometrien oder Import aus externen CAD-Programmen - Schleifsimulation - Kompensation von Profilverzügen, Freiwinkeln - Berücksichtigung von Schrumpfung am Werkstück - Übernahme von Werttabellen - Einbindung und Weiterverarbeitung von CAD-Daten im DXF-Format - Vor- und Fertigschleifen mit Restgeometrie-Erkennung (Freischleifen-Glätten) - Externe Programmierstation Transformator: 20 kVA, MKDG20, (3x380-400-415V/3x200V) Spindelkühlung: Kühlaggregat für Schleifspindel Luftentfeuchtungseinheit inkl. Luft-Öl-Einheit Maschine wurde im 06/2025 von einem Amada-Techniker geprüft (Bericht liegt bei).