MIKRON VCE 1300/40

MIKRON VCE 1300/40

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Nkoded Sitkjpfx Abbet Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Nksdpjt Hxamefx Abbet Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1970, For sale: Hilgeland forging machine, model CH5AL The machine is in perfect technical condition. Machine weight: approx. 20 tons. The forging machine comes with extensive tooling. Loading provided. Nodju Szucjpfx Abbskt Max diameter of normalized bolt: 16 mm. Max length: 200 mm.

Stanje: zelo dobro (rabljeno), Control: Heidenhain Positip 850; Spindle taper: SK 40; Hydraulic tool clamping; Quill stroke: 100 mm; Table: 800 x 480 mm; Travel paths: x = 600 mm, y = 400 mm, z = 400 mm; Rapid traverse; Feeds: 63–800 mm/min (18 steps); Spindle speeds: 63–3150 rpm (18 steps); Nodpfelkgvbex Abbjkt Accessories: Coolant system, collet chuck incl. collets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 4.500 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 090119, Country of manufacture: CE – Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h – Working hours: 4,500 h TECHNICAL DATA Nkjdpfx Aeht Hg Djbbet AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm Rotational range B-axis: 0.0001 – 360° Rotational range C1/C2-axis: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of stations: 24 Number of driven stations: 18 Number of static stations: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16 x 16 mm (20 x 20) Maximum turret head path above tool tip: 500 mm Speed of rotating tools: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø 42 x 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull/push force: 20,000 N FEED DRIVES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance rate) Chip conveyor submersible pump output: approx. 10 l/min at 4.5 bar      80 l/min at 3.2 bar      150 l/min at 0.7 bar High-pressure pump (in conveyor): 10 l/min at 13.2 bar      50 l/min at 9 bar      90 l/min at 1 bar Lubrication volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROLLER: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Repeatability: 0.6 µm Max. runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulic return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60 optional) Control voltage: 24V DC Total power: 35 kW Nominal current: 63A Connection: TM / TT / IT grid PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Valve voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop6611 NOISE EMISSION Normal operation: 78–80 dB Technical data subject to change; errors and omissions excepted Inventory No. 2321018; machine configuration: - Chip conveyor - Prepared for bar feeder installation Tool holders: - 6 fixed drill holders ER32 - 8 turning tool holders - 5 powered tool holders ER32 - 4 powered tool holders ER25 - 6 powered tool holders ER20

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Spinner TS66L-SMC CNC stružnica s kontravretenom Leto izdelave: 2008 Krmiljenje: FANUC 18i-TB Premer struženja: 400 mm Dolžina struženja: 640 mm Premer palice: 66 mm Obodni premer: 685 mm Pomik - X os: 240 mm Pomik - Z os: 640 mm Hitrost vrtenja glavnega vretena: 4000 1/min Hitrost vrtenja kontravretena: 5000 1/min Prehod glavnega vretena: 73 mm Prehod kontravretena: 43 mm C-os: 0,001 ° Revolverska glava: 12 pozicij, vse gnane Orodni nosilec: VDI 30 Pogonsko orodje: 9 kW Pogonsko orodje: 4000 1/min Premer posuv: 500 mm/min (brezstopenjsko) Nodoxptz Ropfx Abbokt Hitri pomik X-os: 18 m/min Hitri pomik Z-os: 24 m/min Pogonska moč motorja vretena: 19 / 14 kW Teža stroja: pribl. 5,7 t Potreben prostor: pribl. 2,35 x 1,65 x 1,85 m

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the vehicle’s rear tailgate, which enabled the military to transport a truck or other military equipment. The "XV" following LARC indicates the maximum payload capacity: 15 tons. Njdpfx Aexcgy Hobbokt The vehicles are constructed from aluminum and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (US measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins eight-cylinder diesel engines, each producing 300 HP. On land, they could reach a maximum speed of 48 km/h, and in water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight is 35.5 tons. The previous owner intended to convert the boats to fully electric propulsion in order to offer sightseeing tours in the Wadden Sea. Approximately €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Nkedsvwgpbopfx Abbet Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder - Assorted tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Njdpowyv Nzsfx Abbskt Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: dober (rabljeno), Laminating pressure: 220 kN Workpiece diameter: 3mm min; 70mm max Feed pitch: 6mm max Knurling pitch: 2.25mm max Roller width: 160mm max Roller diameter: 133mm min; 170mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54mm standard; 69.85mm special Center distance between shafts: 135mm min; 230mm max Working stroke: 15mm max Feed rate: from 0.5mm/s up to 6mm/s Laminating time: from 0.1s up to 100s Pause time: from 0.1s up to 100s Main motor: 5.5 kW Power consumption: 8.6 kW Tank capacity: 130 L Nksdpsvyyyxofx Abbst Approximate weight: 2100 kg