Vertikalni obdelovalni center

Mikron UME 600

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Heidenhain TNC 407 SK 40 air and water cooling Tool changer with 22 positions Travel paths: 600 x 500 x 450 mm Spindle speeds: 5–5,000 rpm Feed rate: 0–10,000 mm/min Main spindle drive power: 6 kW Gbsdpfx Asgydn Ienfjl

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) Gedoqt Dmyopfx Anfjbl - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: X-hod: 600 mm Y-hod: 500 mm Z-hod: 450 mm Obratovalna hitrost: 5 - 5000 min⁻¹ Hod pinole: 90 mm Skupna potrebna moč: 9 kW Območje pomika: 0-10.000 mm/min Gedpfx Anjy A Rmgsfjbl Teža stroja pribl.: 3260 kg Prostorske zahteve pribl.: 2200x2800x2000 mm Vreteno: 6 kW Dodatna oprema: Vertikalna rezkalna glava z hidravličnim vpenjanjem orodja SK 40 Univerzalni CNC rezkalni stroj za orodja (brez menjalca orodja), z 3D potekalnim krmiljenjem Heidenhain TNC 407, elektronski ročni kolesnik, naprava za hlajenje,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 9.031 h, največja hitrost vretena: 5.000 obr/min, skupna masa: 3.200 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 407, moč vretenovega motorja: 9.000 W, število osi: 3, This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample space for various machining operations. If you are looking for a high-quality milling machine, consider the vertical machining center MIKRON UME600 we offer for sale. Contact us for further details. • Feed rate: max. 10,000 mm/min • Table size: approx. 900 × 530 mm Gjdpfxsyll Sze Anfobl • Automatic tool changer: none • Condition: Used, overall in good condition; fully functional and ready for operation • Machine hours: 11,643 h • Spindle hours: 9,031 h Additional equipment • Coolant pump • Machine vise • 3D probe system • Various collet sets / SK40 tool holders • Tool cabinet with worktop and vise • Further accessories available upon request Technical Specification Taper size SK 40

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Z 500 mm 10.000 vrt/min Gbodpfswx Rafsx Anfel

Stanje: rabljeno, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board, circuit board - Manufacturer: Mikron, electronic module printed circuit board from CNC milling machine Mikron UME 600 - Type: 958 78 11 200 - Dimensions: 145/110/H55 mm Gsdporc Ilgefx Anfobl - Weight: 0.4 kg

Stanje: rabljeno, CNC control, operator panel, machining center operator panel, operating unit, control panel, control unit - Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 - Model: TCD 22 - DIN 8659 - PCB: WW TCD 22 operating unit 104.73.20.042 - Individual components: see photos - Dimensions: 480/240/H160 mm - Weight: 5.3 kg Gedpercnmwofx Anfobl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Gjdpfxoxw N S Is Anfsbl Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: dober (rabljeno), Tool changer chain, chain magazine, tool changer system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining centre Mikron UME 600 -for: max. 22 holders Gjdsrb E E Nspfx Anfebl -Holder type: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za povrat energije Gbodporb E Hbefx Anfjl -Proizvajalec: Siemens, Simodrive 611 LT-modul INT. 50A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0CA0 -Dimenzije: 290/50/H480 mm -Teža: 6,8 kg

Stanje: rabljeno, Leto izdelave: 2003, Maks. premer struženja: 420 mm Dolžina struženja: 1090 mm Krmiljenje: FANUC serija 18i-TB Prehod glavnega vretena: 108 mm Vpenjalna glava: 250 / 315 mm Območje vrtljajev: 0-3750 min⁻¹ Podajalna hitrost: 18/24 m/min Orodja: 12 Hod konice: 100 mm Premer konice: 110 mm Priključek: MK 4 Število gnanih orodij: 12 Obrati: 3000 min⁻¹ Navor: 22 Nm Rezervoar za hladilno tekočino: 140 l Skupna potrebna moč: 22/18,5 kW Teža stroja pribl.: 6500 kg Cilindrično držalo DIN 69880: VDI 50 Obdelava palic: Ne Obdelava v vpenjalni glavi: Da Gedpjucgylefx Anfobl Hidravlična luneta notranji premer: Dm 20-165 mm

Stanje: dober (rabljeno), SPS krmiljenje, močnostni modul, LT-modul, E/R-modul, modul za vračanje energije Gedpfxerb E Hfe Anfobl -Proizvajalec: Siemens, LT-modul Simodrive 611 INT. 2X15A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AB00-0AA0 -Dimenzije: 290/50/H480 mm -Teža: 5,8 kg

Stanje: dober (rabljeno), Krmiljenje SPS, močnostni modul, LT-modul, E/R-modul, povratni modul -Proizvajalec: Siemens, Simodrive 611 LT modul INT. 25A iz CNC rezkalnega stroja Mikron UME 600 -Tip: 6SN1123-1AA00-0BA2 -Dimenzije: 290/50/V480 mm Gbodjrb E Hqepfx Anfsl -Teža: 5,8 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Gbsdpfxetwy Die Anfjl Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg

Stanje: rabljeno, Main spindle with drive motor, universal milling head, milling holder, milling extension, angular milling head, upper support, upper slide, dovetail guide, tool slide, cross table. - Manufacturer: Mikron, upper support and tool slide from CNC milling machine Mikron UME 600 - Motor: Siemens 380V 3.7/5.25 kW, see photo of nameplate - Speed: 1500/9000 rpm Gbjdpfx Ansrc Ik Hjfjl - Spindle head: SK40 taper - Dimensions: 1550/560/H735 mm - Weight: 555 kg