Stroj za površinsko brušenje

Mikromat SFW 200 PA 2

Stanje: rabljeno, Rotary vane vacuum pump Oil circulation lubricated Manufacturer: Busch Model: RC 1000 B Condition: Fully overhauled Hjdjcu Tirepfx Af Tjng Warranty: 12 months Pumping speed: approx. 1000 m³/h Ultimate pressure: approx. 20 mbar Operating fluid: Mineral oil (included) Delivery time: 2 weeks

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Hnedot Hwziepfx Af Tsg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 1076-85, Offer 24303 Technical Data: - Table size approx. 630 x 340 mm - Working area of axes: - X (longitudinal) approx. 400 mm Hsdpfst Dxwgox Af Tjng - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance spindle – table surface: 400 mm - Tool holder: SK 40 - Spindle speeds adjustable in 16 steps: 45 – 2240 rpm - Feed rate X, Y, Z axes: 6.3 – 1250 mm/min - Drive: 400 V / 8.5 kW - Space required approx.: W 1450 x H 1900 x D 1450 mm - Weight approx.: 1600 kg - Equipped with: 3-axis digital readout HEIDENHAIN, swiveling vertical milling head, horizontal spindle counter-support, machine vice

Stanje: pripravljen za uporabo (rabljen), X-axis: 500 mm, Y-axis: 400 mm, Z-axis: 350 mm, quill stroke: 50 mm, spindle speed: 20–5000 rpm, connected load: 10 kVA, control: Maho CNC 432, length: 2022 mm, width: 3030 mm, height: 1915 mm, weight: 2.1 t, operating hours: 29,578 h, with documentation, without spare parts, machine runs perfectly both mechanically and electrically, control elements have been recently overhauled. Hedpfx Askn R Dhjf Tjng

Stanje: dober (rabljeno), x-travel 410 mm y-travel 310 mm z-travel 400 mm Main spindle taper SK 40 Table clamping surface 700 x 280 mm Hnsdpfxsi Elyds Af Tjg Speed range 45 - 2000 rpm Quill stroke 63 mm Total power requirement 2.2 kW Machine weight approx. 1300 kg Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage 400 V 3-axis digital readout Heidenhain Fixed angle table Coolant system Swivelling vertical milling head

Stanje: rabljeno, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: Morse Taper 4 (MK 4) Total power requirement: 1.8 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Hodpfx Afewn T A Us Tjng Feed mechanism 2 gearbox speeds Forward/reverse operation Foot switch Machine lamp

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R Hnodpfxjwd Tx Uo Af Tog We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. Hnedpfx Afsuxft Ee Tog The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: rabljeno, TECHNICAL DATA Hnedpfx Ajuhb Uhsf Tsg - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, potovalna razdalja osi X: 400 mm, pomik osi Y: 200 mm, AVAILABLE SOON! VERY WELL-PRESERVED COORDINATE GRINDING MACHINE HAUSER S 3 – Year of manufacture: 1988 Table travel: 400 x 200 mm Machine in first-class condition with exceptionally comprehensive accessory package. Rotary table can be operated via handwheel or rotate freely. High-precision universal table – rotatable, tiltable, and inclinable Swivel range: 90° – Angular reading: 5 arc seconds Multiple grinding motors and various turbines up to 200,000 rpm, including suitable collets. Automatic feed on the U-axis with separate My digital display. Machine wiring (heating) for constant machine temperature. Coolant system with splash guard. Acoustic & optical proximity monitoring with headphones. Centering microscope. Halogen lamp. Centering devices with My dial indicators. Hsdjv Amy Depfx Af Teng Hydraulic clamping of X and Y axes. Automatic central lubrication. Complete documentation including circuit diagrams, etc. The machine costs less than the new accessory value! Technical data subject to change – errors excepted. Pricing: ex stock, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Payment: as customary in the trade – prior to removal – due immediately upon receipt of invoice.