Brezsredinski brusilni stroj

MICROREX 502

Stanje: pripravljen za uporabo (rabljen), The machine is in very good condition and can be tested on site. Technical data - Grinding machine Working area (mm) Height x Length x Depth: 80 x 110 x 55 Duedpfowvgidox Aplst Motor power (kW): 0.5 Speed (rpm): 5000 Feed rate (strokes/min): 150 Table load capacity (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20 or 1:50, suitable for rough grinding. If you have any further questions, please feel free to contact me.

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds Dodpfxsrqwbij Apljut • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, Oprema: 1 vpenjalni dovod desno 1 ekscentrična stiskalnica 90 kN 2 ožji sani agregata 3 običajni sani agregata Djdpfel D N Hvex Apleut Delovno območje: Območje debeline žice: 0,5 - 3,5 mm Širina traku: maks. 32 mm Dovodna dolžina: maks. 170 mm Kapaciteta: maks. 250/min

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Djdpfx Ast Hw N Hjpljut Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za brušenje zobnikov Niles ZSTZ 630i. Stroj je v celoti delujoč, na zahtevo lahko pošljemo video. Djdpjxzfugofx Apljut

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Dujdpfx Apetycg Soljt Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 690 mm, izvrtina vretena: 150 mm, premer struženja: 1.040 mm, premer struženja nad zgornjim sanežem: 690 mm, višina središča: 500 mm, širina na sredini: 2.000 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 160 mm, pomik po osi Z: 380 mm, prehod palice: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In bed gap: 1,070 mm Bed width (hardened ways): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Compound rest travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Duodoyhhuwjpfx Aplst Rear bearing diameter NNU: 190/260/69 mm Internal taper in reduction sleeve: Morse No. 6 Spindle speeds: 24 Speed range: 4 to 800 rpm THREADING Threads: 398 Metric: 0.5 to 224 mm Module: 0.25 to 11 mod. Whitworth: 56 to 1/8 tpi Diametral pitch: 112 to 1/4 DP FEEDS Number: 108 Longitudinal, cross, compound: 0.05 to 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and compound: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill taper: Morse No. 6 Quill stroke: 420 mm STEADY RESTS Steady rest capacity on bed: 140 to 500 mm Steady rest capacity on carriage: 40 to 350 mm PERMISSIBLE LOAD Overhung: approx. 1,500 kg Between centres, without steady: approx. 5,000 kg Between centres, with steady: approx. 6,000 kg Machine weight: approx. 7,800 kg

Stanje: zelo dobro (rabljeno), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel (X axis): 1520 mm Cross travel (Y axis): 650 mm Vertical travel (Z axis): 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Djdpjwlh Adefx Aplsut Elcon 3 electronic control

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry. Dsdpfx Aet Hw Naopleut

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke Dedpfx Apet Hww Doljut -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice