2015 MICHELIN| terminalske traktorske pnevmatike 310/80R22.5

MICHELIN| terminal tractor tires 310/80R22.5

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa Dujdpfx Ajvz Hq Hsbtou - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), Two Casadei spindle moulders are available. (1) Casadei FM5L, maximum milling height: 100 mm, motor power: 6 kW, length: 2540 mm, width: 1195 mm, height: 1500 mm, weight: approx. 950 kg, year of manufacture: 1992, equipped with table extension. (2) Casadei FM5C, motor power: 6.8 kW, year of manufacture: 1994, equipped with sliding carriage. An on-site inspection is possible. Dujdpfx Abeurwy Netsu

Stanje: zelo dobro (rabljeno), Prodajam rabljeno stiskalnico Klauke K18. Profesionalna mehanska stiskalnica ENERGOTYTAN KLAUKE K18 je zasnovana za najzahtevnejša elektroinštalacijska dela. Stabilna konstrukcija je primerna za uporabo tako na prostem kot v notranjih prostorih ter zagotavlja enostavno upravljanje. Dodpfx Asw Slkdjbtjuu

Stanje: dober (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 21022, Offer 25091 Technical Specifications: - Roller diameter: 420 mm - Throat (working depth): 400 mm - Max. clearance height: 280 mm - Table size: 600 x 600 mm - Table tiltable in 2 axes: ±45° and ±15° - Table height from floor approx.: 975 mm - Saw blade length: 3200 – 3400 mm - Infinitely variable bandsaw speed: 10 – 260 m/min - Drive: 400 V / 0.9 / 1.7 kW - Weight approx.: 500 kg - Required space approx.: W 750 x H 1950 x D 1150 mm Duodpsv U Swxofx Abteu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M4540100, Leto izdelave: 1993, obratovalne ure: 2.170 h, nosilnost: 41.000 kg, dvižna višina: 12.100 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 5.020 mm, lastna masa: 78.500 kg, vrsta pogona: Diesel, Full-container reachstacker Chassis number: M4540100 Load center: 1800 mm Duodpfeu Dqy Usx Abteu Mast type: Telescopic Transmission: Clark 36000 Technical condition: Good Front tires type: Pneumatic Front tires condition: 40–60% Rear tires type: Pneumatic Rear tires condition: 20–40% Full cab,

Stanje: novo, Leto izdelave: 2025, MODELL: HF500 6” (12”) BEZEICHNUNG: SCHWERSCHLAUCH-PRESSEN - HOCHLEISTUNG Presskraft: 500 Tonnen Max. Crimpbereich: 310 mm Öffnungshub: +115 mm Öffnung ohne Backen: 360 mm Geeignet für 90°-Bögen bis 3” Schließgeschwindigkeit: 18 mm/s Pressgeschwindigkeit: 1,4 mm/s Öffnungsgeschwindigkeit: 20 mm/s Geräuschpegel: 62 dBA Antrieb: 5,5 kW, 3~AC Duodpfx Ajwbtaajbteu Siemens Touchscreen Steuerung Proportionale Druckregelung Positionskontrolle Preis: 64.000 € DAP Sofort ab Lager lieferbar

Stanje: rabljeno, New: Yes Djdpfxoyavyrj Abtsuu Contact us for further information.

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Dujdpfx Absxbfutstju

Stanje: rabljeno, Leto izdelave: 2024, New: Yes Color: Red Djdpfx Abox I Dtdjtsuu Working width: 180 cm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), A total of four Engel injection moulding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is a defective unit used for spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. An on-site inspection is possible. Individual sale is possible. Dsdpfx Ajv Extzsbtouu