Upogibni zvitki

MG 3100 x 32 mm CNC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, - RABLJEN - STROJ ZA UPIGANJE CEVI OSÍ: 3 MAKSIMALNI PREMER CEVI: 30 x 2 mm DELOVNA DOLŽINA: 3000 mm HITROST POZICIONIRANJA OSI X: 900 mm/s HITROST UPIGANJA OSI Y: 200 °/s HITROST ROTACIJE OSI Z: 360 °/s NAJVEČJI POLMER UPIGANJA: 20 DO 170 mm KRMILNA ENOTA: DNC800 Kjdpjvhc Uuefx Af Tjdg

Stanje: rabljeno, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Kdjdpfxs Dvlis Af Tog Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty. Kdedpfowchn Uox Af Teg

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Kdsdped Hxx Ajfx Af Tog Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Technical specifications: - Max. working width: 3030 mm - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW Kedpfx Asmdqllof Tjdg - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel

Stanje: pripravljen za uporabo (rabljen), najv. debelina jeklene pločevine: 10 mm, zadnji prislon: 1.000 mm, moč: 21 kW (28,55 KM), skupna dolžina: 4.330 mm, skupna širina: 2.200 mm, skupna višina: 2.110 mm, lastna masa: 10.000 kg, dolžina obdelovanca (maks.): 3.100 mm, CNC Siemens, zadnji naslon in nastavitev rezalnega kota; 2 sprednji podpori dolžine 3 metre; ročna nastavitev reže rezila; zadnja zaščita za vstop. Udari/min: 9 > 40 udarcev/min Nastavljiva rezalna naprava: 0,1 > 1,5 mm Zadnji naslon: 1000 mm Siemens Nastavljiv rezalni kot: 0,5° > 2,5° Potrebni tok: 380V Število držal za pločevino: 17x Kdsdpjv Taiaefx Af Tsg

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation Kdjdpfswbhq Hox Af Tjg 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical specifications: Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Motorized lower roll adjustment • 2 x digital readout Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Pre-bending thickness: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Kdodpfjhzq D Hsx Af Tsg Minimum bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: • Electrically driven top and bottom rolls • Swing-out top roll • Conical bending device • Asymmetric roll arrangement • Self-braking main motor • Separate control and operating panel • Safety cable • Values refer to St-37 / 240 N/mm² • CE mark

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, Sahinler HPK 200 Hidravlični stroj za upogibanje profilov in cevi Premer osi in vretena: 200 mm Premer orodja in valjev: 900 mm Delovna hitrost: 2–5 m/min Moč motorja: 30 kW Upogibna zmogljivost x15x4: 273x5,6 / 10.000 mm Največji premer valja: 9"x6,3 / 4.000 mm Premer zgornjega valja: 650 mm Kapaciteta valjanja za profile – 3: 200x200x18 / 5.000 mm Premer vretena: 200 mm Zgornji valj x15 s pred-upogibanjem: min. 120x120 / 3.000 mm Napetost: 3x400 V Kjdpfxow D Uqxe Af Tjdg Delovna hitrost: 2–5 m/min Maksimalna moč: 30.000 W Višina: 2.300 mm Dolžina: 2.400 mm Širina: 3.400 mm Teža: 15.000 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, število valjev: 3, Premer zgornjega valja 280 mm, 12 mm predupogib, zmogljivost 18 mm (3x premer zgornjega valja). Teža 7.100 kg. Kjdpfx Aowtp Hajf Tsdg