Presejalni obrat

Metso 2PP 7000/2250

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Nwodped E A I Iefx Adyob Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 239 kW (324,95 KM), skupna masa: 50.500 kg, Leto izdelave: 2002, obratovalne ure: 11.245 h, številka stroja/vozila: CCC00513, 239 kW Weight: 50.5 t Engine completely overhauled Undercarriage as good as new Track width: 600 mm New cylinder seals Nwjdpfx Adelhqhmeyjb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Nwodovwlqqspfx Adyeb Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, - Concasseur à percussion primaire, marque Laron, modèle IM 16 - Ensemble complet disponible en version mobile ou stationnaire. - Roulements du rotor neufs - Barres de percussion du rotor neuves - Platine frontale presque neuve - Capacité de production : 800 t/h Nwodpfx Aeimwg Hjdyjb - Ouverture d’alimentation : 2320 x 1700 mm. Moteur de 600 ch. - Roulements et supports neufs - Barres de percussion du rotor neuves - Alimentateur à tablier articulé : largeur 2 000 mm, longueur 10 000 mm. Réducteur et moteur 40 ch. État de l’alimentateur : quasi neuf. - Pré-tamiseur à disques : largeur 2 000 mm, diamètre 1 000 mm. Réducteur et moteur électrique. - Trémie d’une capacité de 40 m³. Assemblée boulonnée, démontable en plusieurs morceaux pour le transport. - L’ensemble est monté sur un châssis doté d’une attache pour tracteur routier et transportable sur essieux dolly. Nous disposons également de broyeurs secondaires à marteaux, de cribles et de convoyeurs pour compléter une installation clé en main.

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Znamka: Kleemann Tip: SSTR 1250 Nwedpfxsu S Tqvs Adyeb Vhodna odprtina: 1250 x 950 mm Vključuje: Elektromotor Teža pribl. 38 ton

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Nodpfx Aoq I Rkdedyswb Elektromotor: 250 kW

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Infeed opening: 620 x 350 mm Rotor diameter x width: 1,060 x 610 mm Hard rock intake: up to 180 mm Njdpfx Adslgzrhjyowb Limestone intake: up to 300 mm Complete with electric drive, discharge conveyor, and steel construction

Stanje: dober (rabljeno), Ponujamo rabljeni dvojni čeljustni drobilnik znamke Krupp. Dobro ohranjen, popolnoma delujoč. 500 x 300 mm, 15 kW, nova orodja. Motor je trenutno v prenovi. Nsdpfx Adjwy U Iceyswb

Stanje: rabljeno, Leto izdelave: 2022, vrsta goriva: dizel, proizvajalec motorjev: C32 (Remanufactured by Cat), Intended use: Construction Unladen weight: 18,221 kg Generator output: 1,250 kVA Transport dimensions (L x W x H): 20 ft HC container Please contact the Sales Department for further information. Over 85 years of sales experience in the Netherlands. An expert team that seeks individual solutions tailored to your needs. 1,000 operating hours or 1 year warranty: maximum reliability. Available 24/7, seven days a week. Fast service. Large stock, available immediately. Nwodpfx Adewgvqfoyjb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, Essentially consisting of: feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening unit, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet integrated in container, storage silo, dust suppression system. Nsdpfsq Tcmvsx Adyswb