Varilni set

Merkle TIG 253

Stanje: rabljeno, številka stroja/vozila: 050189, for groove width: 13 - 30 mm for groove depth: 22 - 35 mm Milling cutter speed approx.: 1200 rpm Hodpfxjb Amlhs Anpow Drive motor: AC 220 V, 1020 W Weight: approx. 6 kg

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 12641207, Offer 23108 Technical specifications: - Welding current: max. 550 A at 60% duty cycle (ED) - Welding current: 420 A at 100% duty cycle (ED) - Adjustable welding current range: 50 A – 550 A Hsdpolzif Sofx Anpow - 3 coarse settings + 12 fine settings - Separate wire feed unit with 4 m intermediate hose package - 4-roller wire feed, infinitely adjustable: 0.5 – 24 m/min - 2-stroke + 4-stroke operation selectable - Water-cooled torch package, approx. 4 meters - Ground cable - Pressure regulator - Connection: 400 V / 64 A - Space requirements: approx. W 550 x H 1310 x D 1050 mm - Weight: approx. 150 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, MIG-MAG welding system Adjustable welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open-circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Hjdpfswx Hz Eox Anpsw Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space requirement: 950 x 550 x 850 mm

Stanje: novo, Table length 2000 mm Table width 1000 mm Table height 920 - 1000 mm Machine weight approx. 0.45 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick S355 steel The surface is pickled and oiled. Tolerance: Top +/- 1 mm and on the sides +/- 1 degree. Side plates 150 x 10 mm Height adjustable from approx. 920 - 1000 mm Underside ribbed for reinforcement. Hsdpfsvn Uycex Anpjw Including floor mounting Optional accessories! Pictured accessories are optional!

Stanje: rabljeno, Technical Details: Welding current, infinitely variable: 320 / 100 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG welding with direct current - TIG welding with pulsed current - Manual arc welding (MMA) 2/4-stroke control, spot welding, infinitely adjustable New components such as: - 4.0 meter hose package, water-cooled Hodpfju Nwa Sex Anpsw - 4.0 meter earth clamp and ground cable - Pressure regulator - TIG welding torch ERGO 301

Stanje: zelo dobro (rabljeno), Verižni dvigala - DEMAG / STAHL - 14 kosov: 1. Demag DKUN 10 - 2,5 t. 2. Demag PK10 - 2 t z električnim vozičkom, elektro omarico, kablom. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Verižni dvigalo Demag - 3 kosi: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. Hsdoyvwbwepfx Anpow 9. Demag PK 1 N - 125 kg. 10. Demag motor PKUN 1 - 125 / 250 kg. Verižni dvigala Stahl: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Stanje: novo, Max. welding current: 300 A Open-circuit voltage: 55 – 76 V Input voltage: 400 V Weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for MIG/MAG welding machine: Hose package 4 m Ground cable 4 m Hjdpfx Asvn U Eronpow List price: €2,200

Stanje: novo, Dolžina mize: 4000 mm Širina mize: 2000 mm Višina mize: 200 mm Teža: 2400 kg Proizvajalec: GERD WOLFF Maschinenfabrik ® Dimenzije in teža • Dolžina: 4000 mm • Širina: 2000 mm • Višina: 200 mm • Teža: 2400 kg Tehnične lastnosti • Material: jeklena pločevina Q355, varjena • Debelina materiala: 25 mm • Premer izvrtine: Ø 28 mm • Razdalja med izvrtinami: 100 mm v diagonalni mreži • Vgravirane mreže: 100 mm razdalek • Tri dni trajajoč proces plinskega nitriranja • Površinska trdota nitrirane plasti: HV 450–630 Hjdpfjymf H Usx Anpew • Lasersko vgravirana natančna skala • Ojačana spodnja stran s varjenimi šivi in rebri • Povečana odpornost proti koroziji ter utrujenosti in vibracijam • Zaščita pred prilepljenimi varilnimi brizgami Noge • 8 nog, nastavljivih po višini • Delovna višina: 820–865 mm • Obseg nastavitve nog: 620–665 mm • Nosilnost na nogo: približno 1500 kg Dodatna oprema • Izbirni 40-delni komplet dodatne opreme z različnimi omejevalniki, omejevalnimi in napetostnimi kotniki, objemkami, prijemnimi vijaki v obliki prizme in še več. Druge velikosti miz (D × Š × V) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Opombe Slike so samo ilustrativne in se lahko razlikujejo od dejanskih dimenzij. Naše varilne mize izdeluje priznani proizvajalec ekskluzivno za našo prodajno blagovno znamko GERD WOLFF Maschinenfabrik. Ključne besede 3D varilni miza sistem, varilna miza z 28-mm izvrtinami, natančna pritrdilna miza, varilna in montažna miza, 3D varilni sistem, varilna miza z mrežo izvrtin, varilna miza z diagonalno mrežo, nitrirana varilna miza, varilna miza iz jekla, varilna miza z nastavitvijo po višini, dodatna oprema za varilno mizo, 3D varilna naprava, modularni pritrdilni sistem, 3D pritrdilni sistem za obdelavo kovin, varilna miza za strojegradnjo, varilna miza za obdelavo kovin, varilna miza s prijemnimi vijaki, varilna miza z natančno skalo, varilno delovno mesto s pritrdilnim sistemom, profesionalna industrijska varilna miza.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Premer vrtenja nad posteljo: 660 mm Premer vrtenja nad prečnim suportom: 420 mm Premer vrtenja v izrezu: 870 mm Razdalja med konicama: 2000 mm Vrtina vretena: D103 mm Število vrtljajev: 36 - 1600 obr/min Pogonska moč: 7,5 kW Hjdpfx Anowwt Szepow Teža: 3200 kg Dimenzije DxŠxV: 3635 x 1050 x 1450 mm Oprema - 3-osni prikazovalni sistem - Fiksna luneta - Vrtljiva luneta - 3-čeljustna vpenjalna glava D315 mm - 4-čeljustna vpenjalna glava D500 mm - Pritrdilna plošča - Hitri pomiki na vseh oseh - Hladilni sistem - Zaščita vpenjalne glave - Odbijačna stena - Nožna zavora - Delovna osvetlitev - Priročnik

Stanje: zelo dobro (rabljeno), The Weldkar TIG 2025 230 V AC/DC portable inverter welder features a welding current range from 10 to 200 A and comes equipped with all the essential options one would expect from a professional TIG welding machine. The welder offers HF ignition, up- and downslope adjustment, 2-4 stroke control, gas flow control and post-flow, as well as pulse frequency adjustment. In addition to a wide range of settings and adjustments for (pulsed) TIG welding, this unit is also equipped with an MMA function (for stick electrode welding). Hsdpfod Nzlxex Anpsw Thanks to its high output, the welder is suitable for welding aluminium, stainless steel, and steel up to 5 mm. Furthermore, the Weldkar TIG 2025 AC/DC Pulse features adjustable current frequency, which improves penetration and ensures better control of the weld pool. The control panel, despite the multitude of functions and options, is straightforward and clearly arranged. THE WELDERS ARE NEW, FROM TRADE SHOWS, DEMONSTRATION UNITS.