Minibus

MERCEDES-BENZ eVito Elektro 9 Sitzer Automatik Klima

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Tedpfxedyah Se Abgof Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 6.310 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 112029, potovalna razdalja osi X: 650 mm, pomik osi Y: 400 mm, pomik po osi Z: 305 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, hitrost podajanja os Z: 20 m/min, model krmilnika: Brother C-00, širina mize: 800 mm, dolžina mize: 400 mm, obremenitev mize: 200 kg, največja hitrost vretena: 10.000 obr/min, dovod hladilne tekočine: 30 letvica, razdalja od mize do središča vretena: 555 mm, razdalja od središča mize do nosu vretena: 625 mm, dolžina orodja: 200 mm, premer orodja: 80 mm, moč: 26 kW (35,35 KM), Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, BROTHER Speedio R650X1 HT machining centre, initial commissioning 2019 22 tools 26 kW high-torque spindle drive Spindle taper BBT-30 10,000 rpm Low-profile rotary pallet changer 2 pallets Tedpfx Absq Hdzbegof 30 bar through-spindle coolant Twin chip disposal system – 2 chip conveyors integrated into one system Coolant mist extraction for cutting fluid

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Tjdpfehvi E Iex Abgof Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, TAKAMAZ CNC kompaktni nakladalnik FC60 Stružnica z avtomatskim nakladalcem in razkladalcem najhitrejši nakladalni sistem na svetu čas menjave obdelovanca: 2,8 sekunde zmogljivost nalaganja do premera 60 mm največja dolžina nalaganja: 50 mm največja teža: 1 kg na stran hitrost podajanja: 120 m/min glavljenje delov omogočeno med postopkom nakladanja krmilnik Fanuc popolna garancija: 2 leti Tehnične specifikacije stružnice: Motor vretena: 7,5/5,5 kW največji premer struženja: 180 mm največja dolžina struženja: 240 mm premer palic: do 35 mm Tjdpjm E I D Hefx Abgef hidravlična glava: 173E do premera 40 mm priključek vretena: A2-5 vrtljaji vretena: 4.500/min orodna revolver glava: 8 postaj prerez orodja: 20 x 20 mm držač vrtalnega orodja: premer 25 mm hitro pomikanje X/Z: 18/24 m/min dimenzije stroja: 1,36 x 1,37 m višina: 1,7 m masa: 2,7 t skupna moč: 14 kVA Montaža in usposabljanje nista vključena v ceno. (Cena je odvisna od lokacije in na zahtevo.)

Stanje: rabljeno, Leto izdelave: 2017, Turning diameter: 290 mm Turning length: 204 mm CNC control: Fanuc 31i - Model B Operating hours: 23,850 h Number of spindles: 2 Maximum spindle speed: 3,200 rpm X-axis travel: 230 mm Z-axis travel: 250 mm Tsdpsvuup Djfx Abgof Distance between spindle noses: 450 mm Spindle nose: A2-6 Spindle bore: 73 mm Tool turret: 2 x 10 tool stations Workpiece magazine: 14 positions Maximum workpiece diameter: 200 mm Maximum workpiece weight: 2 x 8 kg Maximum workpiece length: 120 mm Rapid traverse: 24 m/min Feed rates – longitudinal and cross: 0 – 1,260 mm/min Spindle drive: 15/18 kW Driven tools: 3.7/5.5 kW Driven tool speed range: 4,000 rpm Total connected load: 61 kVA Machine weight: approx. 6.3 t Space requirement: approx. 3.1 x 2.9 x 3.6 m Front turning machine – horizontal double-spindle machine with Raku Raku gantry loader and double-sided workpiece magazine, C-axis and 10-position turret for both sides featuring driven tools, upgraded spindle motor, 14-position workpiece pallet magazine. This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. Tsdehvah Njpfx Abgof B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Tedskt Uuaopfx Abgjf Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: pripravljen za uporabo (rabljen), Manufacturer: Sonny Ultrasonic Tedpfxeh Ri Abo Abgjf Model: 1300 W / 20 kHz

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine – 1250 mm x 1250 mm x 220 mm High precision – High-speed milling and drilling with exceptional quality. (* Pricing depends on equipment; this is a brand-new laser machine manufactured by us) As a CNC milling machine manufacturer, pfeifer-technology with skycnc CNC milling and engraving machines is your partner. Our PFEIFER technology skycnc WK series milling machines with ultra-precise ball screw drives on all axes ensure maximum precision, accuracy, and speed – at an excellent price-performance ratio. With its heavy-duty steel base frame (approx. 2.2 t), the machine achieves exceptional static rigidity, making the processing of solid wood and various metals straightforward. The sophisticated alignment and distribution of 35mm linear rails and guides, together with the massive, vibration-dampening gantry, are distinguishing features of our CNC milling machines. The advanced, freely programmable CNC control system enables flexible operation via touchscreen under any production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this control system, you can generate your machining data or import CAD/CAM data and then process them independently of a PC. The tool changer (up to 16 tools), solid aluminum vacuum table, various cooling solutions for tools and workpieces, automatic lubrication for all axes, and other refined details complete this milling system. With the PFEIFER technology skycnc WK series, you receive a reliable and high-performance large-format gantry milling system for your applications. - Drive system: high-precision ball screw drive on X, Y, and Z axes, precision manufactured - Working speed: 15 m/min - xyz working/travel area: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum channels): 1220 x 1220 x 30 mm - xyz repeatability: 0.03 mm - xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM, etc. - Formats: ISO standard G-code, FANUC compatible - Options: spindle motor/tool changer/vacuum table as per customer requirements - Warranty: 2 years Todps Sd U Dofx Abgsf - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6000 – 24000 rpm (depending on requirements) - Spindle interface: BT 30 4ea ER20 (other interfaces optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine positions - Power supply: AC400 V ±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 2670 (L) x 1735 (W) x 1790 (H) mm - Weight: 2,700 kg