Drugi

MERCEDES-BENZ Arocs 3348 AK 6x6 Krankipper mit Fassi F195A2.24

Internal number for customer inquiries: 3-374----Vehicle with day registration

Mercedes Benz Arocs 3348 AK 6x6 crane tipper with a Fassi F195A.2.24 crane

* Mercedes Benz diesel engine 0M471, inline 6, 12.8 L, 350 kW (476 hp), 2300 Nm, 3rd generation engine 0M471
* Automatic transmission G 330-12/11.63-0.77 MERCEDES POWERSHIFT 3
* Driving program OFFROAD
* Drive 6x6
* Suspension leaf/air
* Differential locks on driven rear axles
* Wheelbase 3600 mm
* Fuel tank volume 290L, AdBlue tank volume 60L

* Drum brakes, front and rear axles
* Electronic braking system with ABS and ASR
* ABS, switchable
* Parking brake, additional on front axle

* M cab CLASSICSPACE, 2.30 m, 320 mm tunnel
* Floor variant, 320 mm tunnel
* Cab width 2.30 m
* Cab, 600 mm mounting height
* Cab rear wall, with window
* Cab tilting device, mechanical-hydraulic
* Roof hatch/ventilation flap roof

* Driver’s air-suspended comfort seat
* Digital tachograph, 2nd generation, ADR
* Multimedia cockpit, interactive
* Navigation system
* 24V/15A socket, passenger footwell
* Auxiliary hot-water heating, cab
* Air conditioning
* Compressed air connection in cab
* Speakers, 2-way system

Three-way tipper body with Fassi F195A.2.24 crane mounted directly behind the cab (crane with premium features: radio remote control, hydraulic outriggers operated by remote, work lights, etc.)

* Loading area length: 4800mm
* Loading area width: 2420mm
Kodpfx Afoxnnvmj Tsdg
* Loading area height: 800mm

Subframe: Subframe as solid steel welded construction, two longitudinal beams with cross members to accommodate the 5 mm thick tipper profile and the 4 mm floor plate made of Hardox or Naxtra. A 1,000 mm high fixed steel front wall with 2 lashing eyes inside, both outer ends at half height. Fixed corner posts with bottom-mounted latches. Rear and side walls (one-piece, full length) made of aluminum hollow profiles; side walls can be folded down and are swinging, with drop-side lift assist. Tailgate also foldable and swing-mounted, with central locking integrated into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, welded to the tipper profile and longitudinal/cross members. Press traverse and tipping pivot integrated into and reinforced in the longitudinal members. Lashing eyes (4 per side) distributed along the outer tipper floor. Steel construction made of St 52-3. All steel parts are sandblasted. Body parts painted or powder-coated in RAL 9016 (single color).

Subframe: Subframe for mounting of front and rear tipping pivots, with press traverse and cross members. In the crane mounting area, executed as box section with lateral crane mounting plates. Plastic fenders are present on the vehicle and will be taken over or modified if necessary.

Hydraulics: Installation of pneumatic control valve in the cab for tipper/crane/trailer and complete hydraulic system including all piping works, for the three-way tipper bridge, trailer tipping hydraulics, and loading crane. Delivery and installation of the corresponding axial piston pump as a constant pump.

Special equipment:
- Rear corner posts fixed
- Lifting aids for the side walls
- Eight lashing eyes recessed in the floor, left and right (4 per side)
- Crane/tipper/trailer hydraulics switchable via valve in the cab
- Positioning of underride guard, taillights, and supply lines left

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.