Tovornjak s ploščadjo

MERCEDES-BENZ Actros mit Rampen, Maschinentransporter

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 8.800 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heater - Safety package Dsdpfow E Abnjx Adhscn - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Navigation system - 26,000 kg GVW - Automatic climate control - White – long-distance specification – etc. Bodywork: - Superstructure made of laser-cut and folded special profiles in a low-bed design - Body length approx. 8,800 mm, minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 extended loading ramps, each with fixed section and extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking, incl. holders on the outer frame when not in use (optionally with strap security) - Ramp operation via electro-hydraulic unit, incl. emergency control at the valve block and manual pump in case of power failure - Hydraulic rear supports - All hydraulic functions controlled via wireless remote control - Grating floor with increased load capacity - Rear with angled tail - Front wall approx. 2,000 mm high made from inward-folded profiles - Stainless steel toolbox mounted inside in front of the front wall - 2 stainless steel side toolboxes on the frame for lashing equipment (one left, one right) - 1 stainless steel rear toolbox on the right (for hydraulic unit and valve block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at the rear - 2 access steps for loading area inspection Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs 6 t lashing points at the rear - 4 pcs 6 t lashing points at the front, below the front wall toolbox Paintwork: - Bodywork KTL powder coated in RAL 9005 black - Front wall painted RAL 9005 black - Ramps and grating floors hot-dip galvanized Decals: - Reflective tape on sides and rear in accordance with EU regulations. Further information available on request.

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 26.000 kg, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, barva: bela, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2 as construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heating Dedpfx Adsw E Abhohscn - Safety package - Driver comfort package - Trailer package - Steered trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White – long-distance version – etc. Body: - Superstructure made of laser-cut and bent special profiles in a low-bed design - Body length approx.: 8,800 mm, minus stowage area approx. 490 mm - Frame height (unladen) approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed and 1 telescopic/extendable section, ramps laterally adjustable - Ramp surface made of grating floor; mechanical ramp locking including holders on outer frame when not in use (optionally with strap securing) - Ramp operation via electro-hydraulic power unit, including emergency control at the valve block and manual pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grating floor with increased load capacity - Rear section incl. bevel - Front wall approx. 2,000 mm high with inwards-bent profiles - Stainless steel storage box inside at the front wall - 2 stainless steel storage boxes mounted laterally on the frame for securing equipment (1 left, 1 right) - 1 stainless steel storage box at the rear right (for hydraulic power unit and valve block) - Work lights: 1 pair on the cab rear wall, 2 pairs laterally on the frame, 2 pairs at the rear - 2 access steps for walk-on access to the loading area Load Securing: - Longitudinal beams with Multi-X contour including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame in perforated design with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the base in front of the forward wall storage box Paintwork: - Body KTL powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating galvanized Labelling: - Reflective tape fitted laterally and at the rear according to EC regulations. Further information upon request.