Tovorna dvigalka na tovornjaku

MERCEDES-BENZ ACTROS 2635 Pritsche 6,40m + HIAB 400 E-5 + FUNK

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, skupna dolžina: 12.200 mm, skupna višina: 2.890 mm, skupna širina: 2.440 mm, moč: 1,65 kW (2,24 KM), gorivo: dizel, Oprema: Na voljo je tipska ploščica, These are three emergency power generators, each with 2000 kVA/1600 kW continuous output at cos-phi 0.8. Voltage: 10 kV, Frequency: 50 Hz. An inspection is possible in 49733 Haren. Engine manufacturer: Perkins Alternator manufacturer: Stamford Fedpfjqqhuyox Abvjfw Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (LxWxH) Weight: approx. 35,000 kg The datasheet (in DE and EN) is attached. Each container is also equipped with a 2,000 L tank for initial diesel supply. The generators are regularly tested under load.

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Ffodpfx Abet Hwupevjw Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 Ffodpfx Absr I Am Hevjw AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.500 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 90 kW (122,37 KM), lastna masa: 36.500 kg, skupna širina: 2.400 mm, skupna dolžina: 9.500 mm, skupna masa: 40.000 kg, dolžina rezanja (maks.): 1.600 mm, leto zadnje generalne obnove: 2024, vrsta vhodnega toka: trifazni, obratovalni tlak: 220 letvica, Scrap Shear MS-6300e (Scrap shear with electric motor) without operating fluids. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12-17 t/h Machine weight: 40 t (+ diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy saving Fedpfx Asuu Upgjbvsfw - Cost saving - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Through the horizontal feed area and due to the self-weight of the scrap, it falls down into the loading chamber and the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool holder side pressing it over the knives at the end wall. As the tool carriage moves horizontally, the processed material is discharged over the knives at the container front wall. When returning to the rear position, the loaded scrap, due to its own weight, moves further into the shear. Scrap shears are available in various configurations according to customer requirements and the output size can be selected (for new orders). Inspection and test operation are possible.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 194 kW (263,77 KM), vrsta goriva: dizel, barva: zelen, lastna masa: 53.050 kg, Leto izdelave: 2012, obratovalne ure: 13.200 h, številka stroja/vozila: 835.5.1445, Very good Sennebogen material handler with crawler undercarriage for sale. Year of manufacture: 2012 Approx. 160 engine hours (new engine installed in 10/2024 for around €57,000, invoice available) Last maintenance and replacement of wear parts carried out in 02/2024 for €11,300 (invoice available) Total operating hours approx. 13,200h Fjdpfxevzn E Eo Abvjfw

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Kwik-Way SVS2 Deluxe brusilnik ventilov – kot nov Vključuje brusilnik nihajnih ročic. Tehnične podrobnosti: Natančna 6-kroglična vpenjalna glava Natančnost: 0,005 mm Minimalni premer stebla ventila: 4 mm Maksimalni premer stebla ventila: 14 mm Minimalna dolžina stebla ventila (pribl.): 85,73 mm Maksimalni premer glave ventila: 100 mm Premer brusilnega kamna za ventile: 178 mm Premer brusilnega kamna za površine: 76 mm Moč motorja vretena: 0,37 kW Moč motorja vpenjalne glave: 0,06 kW Kapaciteta hladilne tekočine: 3,8 l Število vrtljajev vpenjalne glave (pribl.): 100 – 300 Fedpjnacu Djfx Abvefw Brusni koti: 13° – 62° Glavne mere: Š x D x V: 940 x 559 x 406 mm Teža: 141 kg Če vas zanima, prosim kontaktirajte! Na voljo še druge stroje: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Brusilniki ventilov, stroji za obdelavo glave in bloka, rezkanje sedežev ventilov, tlačni preizkuševalniki, pralni stroji za dele

Stanje: rabljeno, Grinding length 1000 mm Grinding width 300 mm Workpiece height 230 mm Table clamping surface 1000 x 240 mm X-axis travel 1000 mm Y-axis travel 270 mm Z-axis travel 350 mm Grinding wheel diameter 240 mm Grinding spindle speed 2180 rpm Ffodpju Dn Txefx Abvew Table speed - stepless - 3 - 30 m/min Total power requirement 4.5 kW Machine weight approx. 2.8 t Machine dimensions (L x W x H) 2.36 x 1.37 x 2.0 m Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), Wet grinding attachment

Stanje: dober (rabljeno), moč: 122 kW (165,87 KM), skupna masa: 27.000 kg, Leto izdelave: 2001, obratovalne ure: 21.200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Operating hours: 21,200 Gross weight: 27,000 kg Fodsua At Njpfx Abvefw

Leto izdelave: 2021, stanje: novo, Retrofitting kit for 2-axis digital readout consisting of: FAGOR digital display with scales for Y and Z axes. Ffjdpohcn Efefx Abvsw Matching scale brackets for HF50 Bracket for mounting the display behind the machine (see picture)

Stanje: rabljeno, Technical Details: Grinding diameter: 260 mm Grinding length: 1000 mm Centre height: 130 mm Clamping length: 1000 mm Feed: manual Headstock adjustment: 280 mm, manual Total power requirement: approx. 6.0 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 2580 x 1750 x 1630 mm Non-circular grinding machine – (Crankshaft grinding machine) Intended for grinding crankshafts, camshafts, etc. Machine table: - Swivable right/left: 6° each - Clamping surface (workpiece): 1240 x 156 mm Grinding spindle stock: - Spindle stock adjustment 150 mm towards workpiece axis - Swivable right/left 90° in two planes - Manual infeed, hand-operated, 280 mm - Grinding wheel/specimen: 350 x 32 x 127 mm Internal grinding spindle type Fortuna SJ 60 x 250L Workpiece spindle stock: Fjdpfxsu Ng Dtj Abvsfw - Speeds: 25 - 65 - 155 - 400 rpm - Swivable manually, +/- 90° - Centre height: 130 mm Equipment: Tailstock fitted with dressing device, rapid clamping quill with centre Machine can be demonstrated on request.