Aluminijasta kotna žaga

MEP Cobra 352

Stanje: rabljeno, Leto izdelave: 2017, Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 mm Cutting capacity at 90°: flat 180x70 mm Cutting capacity at 45° left: round 110 mm Cutting capacity at 45° left: square 95 mm Cutting capacity at 45° left: flat 135x60 mm Cutting capacity at 45° right: round 120 mm Cutting capacity at 45° right: square 100 mm Cutting capacity at 45° right: flat 135x60 mm Vice opening 180 mm Saw blade dimensions 350x32x3.4 mm Speed 1700/3400 rpm Machine weight approx. 600 kg Semi-automatic mitre saw with semi-automatic operation for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left; saw head swivels 0°-45° to the left. Control is via multi-microprocessor system. Two NC-controlled axes enable up to 1,000 different cutting programs — each with individual quantity and length — to be programmed for the same material. - New centralized control console on an articulated arm for easy operation from any working position. Emergency stop button accessible at all times. - Fieldbus communication system with dual microprocessor and serial port. - 20-character x 4-line display showing the following technical parameters: Number of programmed and executed cuts, saw blade thickness, feed length, cutting time, ammeter, as well as more than 100 diagnostic messages and warnings. Podey Ruvbspfx Afasgn - New – Display and logging of alarm and error messages with incident review capability. New – Material feed of 600 mm with cutting motor and ball screw mounted on opposing ball bearings. - New – Low voltage control panel: polyester membrane keyboard with thermoformed, raised pushbuttons and actuation signal. - Programmable saw bow stroke directly from the control panel for adaptation to the material being cut. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system with two vises located at the end faces, which can be positioned freely along the longitudinal axis of the workpiece. - Adjustable mechanical stops for quick positioning of the saw head at 0 and 45 degrees right and left angles.

Stanje: novo, Leto izdelave: 2026, Mini žerjav na goseničnem podvozju TB5000 Mini žerjav na goseničnem podvozju, namenjen za delo v zaprtih prostorih in na prostem. Maksimalna nosilnost: 2400 kg. * radijsko upravljanje naprave - vožnja, delo, razpiranje stopal * dvojno žerjavno napajanje - dizelsko in električno 230 V * največja nosilnost - 2400 kg * sistem za zaščito pred preobremenitvijo kot standard * največji vodoravni doseg nad 11 m * štirje hidravlični podaljški + 1 ročni podaljšek * največji navpični doseg nad 13 m * 4 hidravlično spuščene podpore * teža cca 2200 kg * višina cca 195 cm Pgedpfoibqraox Afajn * širina cca 88 cm * aktivna roka 16 stopinj Dodatna, opcijska oprema: *iskalni kavelj * hidravlični vitel 990kg * Napajanje z litij-ionsko baterijo * blazinice za oporne noge *hidravlični FLY JIB Na voljo v barvi po vaši izbiri.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, MEP Cobra 352 MA hladna krožna žaga v zelo dobrem stanju. Leto izdelave: 2014 Pošiljanje je mogoče. Psdpsyzbmnofx Afaegn

Stanje: novo, Dimenzije žaginega lista 350x32x4 mm Primež 180 mm 2 hitrosti 1700/3400 vrt/min Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 90 stopinjah: kvadratno 105 mm Območje reza pri 90 stopinjah: ploščato 180x70 mm Območje reza pri 45 stopinjah: okroglo 120/110 mm Območje reza pri 45 stopinjah: kvadratno 100/95 mm Pgodsy Dh Nnopfx Afaen Območje reza pri 45 stopinjah: ploščato 135x60 mm Moč 2,2 kW Teža 225 kg Pri modelu COBRA 352 MA (samodejni primež), popolnoma opremljenem z osnovnim podstavkom, se primeži samodejno zaprejo ob spustu žagine glave.

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 400 mm, – Žagin list 400 mm – Dvojni poševen rez – 2 pnevmatska vpenjala – Sistem megličnega mazanja – Pištola za pihanje – Zaščitni pokrov – Dokumentacija Psdpfx Aogg N Drefasgn – 400 V

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Pgedpfx Afofc T Ufoajn Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120 mm Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, with mitre cuts from 45° right to 45° left and a saw head tiltable from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when lowering the saw head. • Roller-mounted turntable for fast and precise mitre adjustment • Screw lock to fix the saw head at any angle position • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head lock in upper position • Adjustable length stop for repeat cuts of identical length • Vice opening: 180 mm

Stanje: novo, Dimenzije žaginega lista: 350 x 32 x 3,4 mm 2 hitrosti: 1700/3400 vrt/min Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 90 stopinjah: kvadratno 105 mm Območje reza pri 90 stopinjah: ploščato 180x70 mm Območje reza pri 45 stopinjah: okroglo 120/110 mm Psdpfxeyv Nqqo Afaegn Območje reza pri 45 stopinjah: kvadratno 100/95 mm Območje reza pri 45 stopinjah: ploščato 135x60 mm Moč: 1,5/2,2 kW Teža: 280 kg

Stanje: rabljeno, 1) PVC Welding Machine with 2 Heads – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Two-head welding machine for PVC profiles. Machine in perfect working order, subjected to regular annual maintenance, complete with manual. 2) PVC Corner Cleaner – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaner for PVC profiles, equipped with lateral support arms. Machine in working condition, annually maintained, complete with manual. 3) Glazing Bead Cutting Saw – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cut-off saw dedicated to glazing bead cutting, designed for precision and repeatability. Included equipment: Infeed/outfeed roller conveyor Electronic management system Machine in working condition, annually maintained, complete with manual. 4) Single-head Mitre Saw - OMG Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver – Emmegi Fissa A Year of manufacture: 2012 Screwdriver for metallic reinforcements intended for frame manufacturing. Machine in working condition. 6) Hardware Assembly Bench – Emmegi BMF 3400 Year of manufacture: 2008 Bench dedicated to assembly of window & door hardware. Complete with: Screwdriver Cremone handle Hardware storage system Machine in working condition. 7) Testing and Glazing Bench – Emmegi Vitro Year of manufacture: 2008 Bench dedicated to testing and glazing operations for windows and doors. Machine in working condition. 8) Compressed Air Central System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, composed of: Boge C12-2LF soundproofed rotary screw compressor, 11 kW, inverter, air delivery 530–2,020 l/min, supersilenced version Vertical galvanized tank, 725 litres, max pressure 10.8 bar, complete with safety valve and pressure gauge MTA CA electronic timed drain valve MTA LP04 water/oil condensate separator MTA DE-XG027 compressed air dryer, 2,700 l/min air flow 9) 4-Axis Machining Centre - MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with a frontal processing head, specifically designed for aluminium machining. Maximum working length: 7430 mm X Axis – Effective working stroke: 7210 mm Y Axis (Transversal) – Effective working stroke: 550 mm Z Axis (Vertical) – Effective working stroke: 500 mm A Axis (Rotating spindle) – Rotation range: ± 180° 10) Double Head Mitre Saw - TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max. cutting length: 4000 mm Blade inclination: outward 11) CANTILEVER Structure Pgedpoywkc Rsfx Afajn Double-Sided Cantilever, 1 double-faced block, 9 shelves per side: Height: 9 m Maximum load per column face: 8,100 kg Maximum load per arm: 900 kg each 12) Copy Router Single Head – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows machining on four sides without repositioning the workpiece, ensuring maximum precision and continuous operation.

Stanje: rabljeno, Leto izdelave: 2020, Mere žaginega lista 350x32x4 mm Primež 180 mm 2 hitrosti 1700/3400 vrt/min Obseg rezanja pri 90 stopinjah: okroglo 120 mm Obseg rezanja pri 90 stopinjah: kvadratno 105 mm Obseg rezanja pri 90 stopinjah: ploščato 180x70 mm Obseg rezanja pri 45 stopinjah: okroglo 120/110 mm Obseg rezanja pri 45 stopinjah: kvadratno 100/95 mm Obseg rezanja pri 45 stopinjah: ploščato 135x60 mm Pgodjyvvnpspfx Afaen Moč 2,2 kW Teža 225 kg Pri modelu COBRA 352 MA (samodejni primež), popolnoma opremljenem s podstavkom, se primeži samodejno zaprejo ob spuščanju žagine glave.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0 Letnik 2017 Dimenzije lista: 350x32x3,4mm Pgedpewu Tz Rjfx Afajn Rezalna hitrost list: 1700/3400 rpm Kot reza : od -45°do +45° Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm Zaslon na dotik Teža stroja: 605kg

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. Pgodpsmb U Tuefx Afajn • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: novo, Circular saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 mm left Cutting capacity at 45°: round 110 mm right Cutting capacity at 45°: square 100 mm left Cutting capacity at 45°: square 95 mm right Cutting capacity at 45°: flat 135 x 60 mm Saw blade dimensions: 350 x 32 mm Speed: 1700 / 3400 rpm Cutting capacity at 45°: round 120 mm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 210 kg Space requirement: approx. 1170 x 860 x 1600 mm Description: Manual high-performance circular saw for mitre cuts from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds Features: - Fitted with pneumatic vices - Saw head can be tilted 45° to one side - Heavy cast iron construction - Ensures vibration-free operation and maximum precision - Head can additionally be tilted up to 45° - Powerful, two-speed drive with double V-belts - Large, ball bearing mounted turntable - Lubrication system with mechanical diaphragm pump - Extraction port for connection to chip extraction system Scope of delivery: - Adjustable length stop 600 mm - Tool kit Pgodjxaai Nopfx Afasn - Operating instructions with wiring diagram - Crane lugs for transport * Machine supplied without saw blade Special accessories: - Including stand

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Psdpfsxaa Uxox Afasgn Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1,700 / 3,400 rpm Control system: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight: approx. 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Features: - Fully automatic CNC high-performance circular saw * for mitre cuts from 45° right to 45° left * for cutting aluminium and light metal alloys - MEP microprocessor control * Windows "CE" based control system * user-friendly interface * up to 100 cutting programs storable * user interface with 7” touch screen display & mechanical buttons * adjustable/swing-mounted operation panel * display and logging of alarms and error messages * positioning of saw head and movement of feeder via joystick * automatic detection of cutting start position - Material feed with stepper motor and ball screw * with 600 mm stroke * can be repeated for any length cuts - Manual safety hood - Mechanical stops at -45°, 0°, +45° * allow for quick saw head positioning - Pneumatic vice system * 2x pneumatic frontal vices * including vertical vice - Heavy cast iron construction ensures vibration-free operation & maximum precision - Saw head can be tilted up to 45° - 2 saw blade speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operating and maintenance manuals

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. Pjdpfxjfv Atlo Afajgn The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1700 / 3400 rpm Controller: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control * user-friendly interface with display and mechanical buttons * saw head start and end positions can be stored - Manually operated safety guard - Mechanical stops at -45°, +0°, +45° * enable rapid positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows adjustment of clamping pressure * pressure depends on the hardness of material being cut * optional pneumatic vertical vice available - Heavy cast iron construction ensures vibration-free operation and high precision - Saw head can be tilted up to 45° additionally - 2 saw blade speeds - Machine base with lockable door - Pneumatic coolant-lubrication system - Machine base Pgsdpfx Asxaa Hnsfaen Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Adapter for feed roller conveyor, incl. 1 support roller - Tool kit - Comprehensive operating instructions, maintenance manual, etc. - Machine is supplied without saw blade!