Univerzalna sušilna omara / inkubator

Memmert B 30

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Model: SB2/500/80 Water-cooled Cooling & heating range: -75°C to +180°C Climate range: +10°C to +95°C Humidity range: 10% to 98% relative humidity Temperature stability, temporal: ± 0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Dsdpfom Tvzcsx Aflsul Feed-throughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Connection voltage: 400V / 3Ph+N+PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your security as a buyer, please note the following: The following steps are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run, monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), Operating temperature: 10-300°C, setting temperature: 20-300°C, setting accuracy: up to 99.9°C: 0.1°C, from 100°C: 0.5°C, temperature sensor: 1x Pt100 DIN class A, 4-wire measurement, control: Control COCKPIT Single DISPLAY, digital PID microprocessor controller with TFT color display, timer: 1 minute to 99 days, functions: SetpointWAIT, calibration of 3 temperature values, parameter selection (temperature, circulating air motor, exhaust air, program running time, time zones), electronically controllable air turbine, adjustable in 10% increments, fresh air via adjustable exhaust flap with preheating, exhaust connection with throttle valve, electronically controllable, logging: data storage in the event of power failure, programming: data logger evaluation via Ethernet, AtmoCONTROL software optionally via USB, safety: electronic temperature monitoring, mechanical limiter TB, protection class 1 (DIN 12880), self-diagnosis system, internal dimensions: 400x320x250mm, volume: 32l, max. shelves: 3, max. load: 60kg, max. load per shelf: 20kg, length: 650mm, width: 660mm, height: 890mm, weight: 45kg. The oven has barely been used. An on-site inspection is possible. Duedpfxow Tl Ilj Aflol

Stanje: zelo dobro (rabljeno), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Machine For sale is a high-quality, used pendulum impact testing machine, model HIT5.5P, from the manufacturer Zwick / Roell. This device is ideally suited for instrumented impact testing in accordance with Charpy and Izod standards on plastics, metals, or composite materials. Device Data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current Pendulum Energy = 5.000 J Friction = 0.017 J Friction Compensation = Empty swing Impact Velocity = 2.9 m/s Pendulum Mass = 1.19 kg Release Angle = 107.46 ° Pendulum Length = 330.0 mm Technical Specifications: Model: Zwick / Roell HIT5.5P Max. Impact Energy: 5.5 Joules Test Methods: Charpy, Izod (instrumented) Data Acquisition: Force-time and displacement-time curves Power Supply: 230 V / 50 Hz Scope of Delivery: - Zwick Roell HIT5.5P including 5.5 J pendulum - Control unit with operator panel - Power and connection cables Shipping via freight carrier (pallet shipment) – costs on request Collection by arrangement in Borken possible. Dsdpfewqfnusx Afljul Condition: used (Technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser chiller Test chamber volume: approx. 990 litres Specifications for temperature testing: Dujdep Dun Ajpfx Aflsl Temperature range: -70°C to +180°C Temporal temperature deviation in the centre of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Heat compensation: max. 2750 W Feedthroughs included as standard: R1: NW 125 mm L1: NW 50 mm Dimensions: Test chamber dimensions: width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed over the floor area of the test chamber): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen lamp 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat emission for water-cooled test chambers: max. heat emission to ambient: 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your safety as a buyer, please note the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) For any further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Control, Water-cooled Control Unit: "Touch Panel" All control and operation commands can be initiated on the "Touch Panel" control unit by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine unit, the test chamber is equipped with adjustable feet. Pass-throughs The test chamber is fitted with pass-throughs on both the right and left sides. These allow measuring leads and test equipment to be routed into the test chamber. Pass-throughs included as standard: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Internal Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Specifications for Temperature Testing: Temperature Range: -40 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max: 4500 W Operating Data: Test chamber lighting: Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 22.0 A; Nominal power: 11.5 kW Fusing by customer: 32 A slow-blow Sound pressure level approx.: Measured at 1m distance from the front, at 1m height: 56 dB(A) Dedothhw Aspfx Afljul Refrigerant: R-404A Weight: 840 kg Safety information for you as the buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Climate Test Chamber We are offering a Vötsch climate test chamber for sale. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Machine dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Ports: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation at +20°C: 4500 Watts Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Maximum heat compensation: 500 W Electrical rating: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important safety information for buyers: The following steps are carried out on each climate chamber prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications are subject to change and errors may occur!) We will be happy to answer any further questions by phone. Duedpfoqnutmjx Aflol

Stanje: zelo dobro (rabljeno), GALDABINI Type: Quasar 50 / Rated capacity: 50 kN with PC, monitor, and testing software GraphWork 5 Universal Testing Machine The universal testing machines of type "QUASAR" are designed as single-space testing frames and basically consist of the following assemblies: - Machine frame: The design and structure of the machine load frame are engineered for the specified maximum loads where required. - Electromechanical load application with toothed belt drive, timing pulleys, drive by either a DC or brushless servomotor, and recirculating ball screws. - Load measurement system with load cell suitable for both tensile and compression testing. - Electronic control unit, which manages all functions: control and regulation, monitoring, and acquisition of output signals from measurement amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock frequency of 25 MHz; analogue signal acquisition is performed via a 20-bit A/D converter. The electronic control unit is typically housed in the base of the machine. This also applies to most of the electrical components for the drive and power supply. Dedpfxov Tywqe Afljul - Operator interface with PC, connected to the electronic control and monitoring board via an RS232 serial interface with high data transmission speed of 38,400 baud. Rigid two-column system with a maximum capacity of 50 kN Suitable for metals, plastics, composites, and other materials Modern design and advanced features Flexible and modular concept for easy future upgrades Key technical advantages include extremely high resolution for load and stroke values as well as a minimum test speed of 0.0005 mm/min for superior performance and highest accuracy results. Technical specifications: - Rated capacity: 50 kN - Speed at maximum load: 0.0005–200 mm/min - No-load speed: 500 mm/min - Distance between grips: 1000 mm - Total stroke: 1000 mm - Crosshead travel resolution: 0.1 µm - Positioning repeatability: 2 µm - Distance between wedge grips: 480 mm - Clearance between columns: 410 mm - Force units: Newton – daN – kgf – lbs Dimensions: - Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm - Power supply: 220V (+10%) 50 Hz - Power consumption: 0.65 kW - Weight: approx. 255 kg (without accessories) - Recommended lighting for use: 300 lux - Weight: approx. 255 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VCS 7018-5 Climate Test Chamber with Humidity, Water-Cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Overall dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Specifications for temperature tests: Temperature range: -70°C to +180°C time-wise deviation: ± 0.1 to ± 0.5 K spatial deviation: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min. Cooling: 7.5 K/min. Specifications for climate tests: Temperature range: +10 to +95°C Humidity range: 10 to 98 % r.H. Time-wise temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Duedpsv N Hc Eefx Aflel Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3 % r.H. Dew point range: -3 to +94 °C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Protection: 32 A slow-blow, to be provided by customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 litres Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerant if needed 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and data subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Dodpfx Afswgaykoleul Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate, Cooling: 5.0 K/min Temperature change rate, Heating: 6.5 K/min Heat compensation at +20°C: 3000 W Duedpfx Aoun Izcofljl Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50 Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free field measurement): < 69 dB(A) Side feedthroughs: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R 23 Weight: approx. 570 kg Buyer safety information: The following procedures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See images) (Specifications and details subject to change and error!) If you have further questions, we are happy to assist you by phone.