Sistem pritrditve s pritiskom

MDS Autoriv Handarbeitsplatz A220-PD

MDS
Type: MDS A220-PD
MDS A220-PD “Autoriv” manual workstation
The A220-PD assembly system is a stationary manual workstation for processing press-in fasteners.
Intended use:
The machine is designed for pressing in fastening elements.
The operator manually inserts the appropriate screws, plastic nuts, and the component to be processed into the machine.
The operator then initiates the pressing process using a foot pedal.
The pressing cycle runs automatically.
Fastening elements:
Press-in nut, rivet nut, self-piercing nut, press-in stud, punch stud / rivet stud
Thread sizes: M5, M6, M8, M10, M12
Technical data:
Control voltage: 230V/10A
Connection plug: HAN 10, not pre-wired
Temperature ranges:
Transport: -20°C to +60°C
Operation: +10°C to +40°C
Storage: -20°C to +50°C
Compressed air connection:
Operating pressure: 6 bar
Quality: Processed, water-free, and oil-free air
Connection: 1⁄2'' thread
Machine dimensions:
Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm
Values refer to a working height (WH) of 1000 mm.
Pneumatics:
Standard: Manufacturer SMC
Ffsdpfjtgik Rex Aflet
Version: Manufacturer FESTO
Control unit:
Standard: Manufacturer B&R
Version: Manufacturer Siemens
Machine type: C-frame A220-PD
Continuous sound pressure level (LpA): 78 dB
Operating modes:
Operating modes can be changed via the control panel.
Automatic mode:
Press-in of fastening elements takes place in automatic mode. Movements are only triggered when the operator presses the foot pedal, initiating the pressing cycle.
Manual mode:
In manual mode, setup operations are performed on the machine. Movements can be triggered individually in this mode.
Weight: approx. 600 kg
Condition: used
Scope of delivery: (see photo)
(Subject to change and errors in technical data and specifications!)
For further questions, please feel free to contact us by phone.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.