Enota za oblikovanje valja 18 postaj

MAT 600 x 3 mm

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t Dodpfx Asb Tdquod Ajup

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) Djdpfefxyhfsx Ad Ajup - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Dsdpjdzqblsfx Ad Ajup Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: dober (rabljeno), Leto izdelave: 2000, SANJO PO3-350 / Offset-Etikettendruckmaschine Wir präsentieren Ihnen diese SANJO PO3 Offset-Etikettendruckmaschine Max. Format: 254 mm x 330 mm / Baujahr: 2000 Maschinendetails: Dodpfxsu I Nu So Ad Aoup  Baujahr: 2000  Druckverfahren: 6 x Offsetdruck (Toray)  Flexolackierwerk  Abwickeleinheit  Corona-Entladeeinheit  2 x Heißprägestation  1 x Luftkühlung  UV-Einheiten, luftgekühlt  Flachbett-Stanzstation  SANJO Aufwickler mit Spotlackierung  Mehrbahnen-Einheit  Hochgeschwindigkeits-Upgrade wurde bereits installiert Technischer und optischer Zustand: Technisch: 9/10 (geprüft und in exzellentem Laufzustand) Optisch: 9/10 (gereinigt, kann direkt zum Endkunden gehen)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Linija za sendvič panele, streha 30,50,80,100 mm, stena 50,80 mm, fasada 50,100 mm Duedpfxexcinao Ad Ajp

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 Dujdpfer I Am Hjx Ad Asp AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. Duodpshwnfcjfx Ad Asp For further details, please refer to the photos.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Djdehigmbspfx Ad Ajup Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Basic information: Year of manufacture: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000 kg Operating voltage: 400/415V 50Hz Power consumption: 20 kW Output at 20g/l: 1600 kg/h Touch screen control panel Duodpfjrfn Rvox Ad Ajp Feeding hopper with screw conveyor Complete documentation available in both paper and electronic forms (electrical schematics, CE conformity certificate, operating manual) Condition: very good (machine clean and well-maintained, used exclusively for expanding white polystyrene) For an additional fee, we can arrange transport as well as installation and commissioning of the machine by our technicians at a location specified by the customer.

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Dodpfsh S Nz Sjx Ad Aoup Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology