Vijačni kompresor

MARK MSM11 D TM500

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Clamping Units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1 axis: 70.00 mm R spindle travel X2 axis: 180.00 mm R spindle travel Z2 axis: 238.00 mm Tool Slide Tool slide: Vertical linear slide Number of tool stations: 16.00 Number of tool stations slide 1: 6/4 Tool shank size: 16.00 mm Internal tool holder diameter: Ø 20.00 mm X1 axis travel: 135.00 mm Y1 axis travel: 260.00 mm Number of turning tools (L spindle) X-/Y-unit: 2/2 (Usable for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Rotary tool motor: 0.5 kW / 0.5 kW Driven tools max. drill diameter: 8.00 mm Rotary tool motor max. tapping diameter: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7.00 Number of tool stations slide 2: 3/4 Tool shank size: 16.00 mm Internal tool holder diameter: Ø 20.00 mm Y2 axis travel: 215.00 mm Machine Dimensions Machine height: 1,670.00 mm Floor space (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Cjdpfx Ahowqz Hasxogt Includes, among others (list not exhaustive): Miyano BX-26S CNC lathe (Year of construction: 2008) Tool holders (see photo of the machine interior) Fire extinguishing system Control for high-frequency spindle High-frequency spindle Chip conveyor Oil mist separator Exact scope of supply according to photo documentation No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2013, Dvostranska kapna žaga za aluminij Listi žage se lahko zavrtijo in nastavljajo po nagibu. Upravljanje E355 Vključno s krožnimi žaginimi listi in odsesavanjem Tehnični podatki: Najmanjša dolžina reza pri 90°: 375 mm Največja dolžina reza: 4500 mm Kot zasuka proti notranjosti pnevmatsko 90° - 45° (ročni nastavki do 22,5° navznoter in do 140° navzven z digitalnim prikazom) Kot nagiba proti notranjosti pnevmatsko 90° - 45° (vmesni koti ročno z digitalnim prikazom in revolverjskim prislonom) Premer lista žage: 550 mm Hitrost žaginega lista: 2250 1/min. Izhodna moč motorja: 4 kW Mere: pribl. 5790 / 1840 / 1985 mm Cjdpfxjyw R Rzo Ahxjgt Teža pribl.: 2110 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Cgedpfxeydaado Ahxst Max. front drilling diameter: 12 mm Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195311, Offer 24601 Technical Data: Cgedpfx Ahevt Trzjxet - Welding current: max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m interconnecting cable - 4-roller wire feed, infinitely variable - 2-stroke + 4-stroke operation selectable - Digital volt and amp display - Spot welding - Interval welding - Water-cooled torch assembly, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Dimensions (approx.): W 750 x D 1100 x H 1600 mm - Weight (approx.): 180 kg

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), Cgodeifn N Nepfx Ahxet incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HURCO TMX8MYS H-TS8034 Leto izdelave: 2011 Cedpfx Ahexg D A Hoxjgt

Stanje: rabljeno, Tehnične podrobnosti: x-hod: 700 mm Codpevc Avhofx Ahxogt y-hod: 450 mm z-hod: 450 mm Vretena konus ISO: 40 (SK 40) Pritrdilna površina mize: 760 x 420 mm Podolžni pomik mize: 10 - 500 mm/min (hitri hod: 1,4 m/min) Vertikalni pomik mize: 5 - 250 mm/min (hitri hod: 1,4 m/min) Vretenaste hitrosti - brezstopenjsko: 32 - 1600 / 18 stopenj vrt./min Vretenasta glava nagibna levo/desno: 10° levo/desno Vertikalni hod pinole: 125 mm Pomik brezstopenjsko: 10 - 500 / 8 stopenj mm/min Hitri hod: 1,4 m/min Skupna priključna moč: 6,5 kW Teža stroja cca: 3,0 t Dimenzije stroja DxŠxV: 2,3 x 2,0 x 1,85 m Dodatne značilnosti: Domet vretenaste glave min./max.: 2094 / 2544 mm Oprema: - Hladilna črpalka z dovodom - Linearni merilni sistem – Heidenhain ND750 Dodatna oprema: - Strojski primež

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Take advantage of this opportunity to purchase a HAAS UMC-750SS vertical machining center. Contact us for further information. Additional Equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable coolant nozzle (P-COOL) • Safe Run – crash and overload detection system • Overvoltage protection for the electrical cabinet • Voltage fault detection module (EPFDM) • Second home position button • Remote jog handle with 2 m cable (RJH-XL) • Memory lock key switch • Rotary axis scales • Top cover Machine Advantages Technical advantages of the machine Cedex U Tizspfx Ahxjgt • Side-mounted tool changer with 30+1 tools • Through-spindle coolant (TSC): 21 bar (300 psi) high-pressure system • Wireless intuitive probing system (WIPS) • Tool breakage detection (BTD) Additional Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB 15" color LCD monitor control unit with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity High-speed machining (HSM) control Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation and scaling Technical Specification Through-spindle coolant: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, FAMUP MCP 45 CNC Machining Centre TECHNICAL DATA Axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed Rates Cedpfxeq U Rm He Ahxsgt Working feed X, Y, Z: 10,000 mm/min Rapid traverse X, Y, Z: 30,000 mm/min Working thrust X, Y: 2,000 N Working thrust Z: 3,300 N Pallet Dimensions: 400 x 300 mm Number of T-slots: 2 T-slot width: 14 mm T-slot spacing: 80 mm Max. table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10,000 rpm Tool Changer Magazine capacity: 16 Max. tool diameter: 63 mm Max. tool length: 150 mm Max. tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3,000 kg No liability is assumed for the correctness, completeness, or accuracy of the above information.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar diameter: 51 mm - Max. machinable diameter: 195 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5" - Spindle drive power: 7.5 kW - Spindle speed: 6000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° TRAVEL - Z-axis travel: 400 mm - X-axis travel: 150 mm - Rapid traverse speed: 36 m/min - Distance spindle / sub spindle: 600 mm TURRET 1 - Number of positions: 24 - Number of driven positions: 12 - X/Z travel: 400/150 mm - Y travel: +/- 40 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.1 kW TURRET 2 - Number of positions: 9 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Floor space required: 3072 x 1974 mm - Machine height: 1799 mm - Machine weight: 6500 kg EQUIPMENT - Control: Fanuc 0i-TF PLUS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-color status lamp - Coolant tank * Internal coolant supply (ICS) - Chip conveyor: DROITE LNS MH500 - Tool measuring probe system Cgodpsw Efgaefx Ahxet - Parts removal unit - Parts conveyor belt - Bar feeder preparation - Electrical transformer