Hladilni sušilnik

Mark MDX 1200

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Hodpfxefz U S Eo Ab Ejfd Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: dober (rabljeno), Leto izdelave: 2003, Tiskalni stroj za tampotisk NIR POWER TC 24, nekdanji pretočni sušilnik za laki na osnovi topil Leto izdelave: 2003 Cena: 1.900 evrov Kontaktna oseba: g. Rainer Eckerle Hfsdpfx Ajd Ai Hksb Eed

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar Hjdpfxeddv Ito Ab Esfd - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Ročno upravljene, vodno hlajene točkovne varilne klešče DALEX tip A 3119 s mehanizmom dvojnega hoda in kratkostopnim omejevalnikom. Kratek hod 25 mm – dolg hod 57 mm. Z elektrodno silačnim stikalom in sekundarnim pretvornikom za nadzor toka. Nazivna moč pri 50% ED: 8 kVA. Sekundarni kratkostični tok: 9,5 kA. Sila elektrod: 180 daN. Razmak med kraki: 120 mm. Doseg krakov: 250 mm. S sinhrono varilno regulacijo RS 11-2, glavnim stikalom, priključnim kablom in 16 A CEE vtičem. Na zalogi obsežen izbor vodno hlajenih elektrodnih krakov. Hfsdpog Ew H Nofx Ab Eed

Stanje: novo, Leto izdelave: 2025, vrsta vhodnega toka: trifazni, skupna masa: 450 kg, skupna višina: 2.500 mm, skupna širina: 4.200 mm, Oprema: osvetlitev, The company BUMEX SP. Z O.O. presents a powder coating booth. Hsdpfxohfwy Ho Ab Esfd Working dimensions: 4,000 x 2,200 mm 5 filters Automatic filter cleaning with adjustable interval from 10 to 1,200 seconds Fan: 2 x 2.2 kW, 9,500 m³/h each = 19,000 m³/h total 2 x LED lamp Delivery time: 14–21 days Our booths stand out due to their very high build quality, operational safety, and the customization of booth parameters to fit your requirements. We provide expert consultation on the selection of paint booths, dust extraction systems, extraction units, and industrial heat recovery systems. CHOOSE BUMEX SP. Z O.O. - Very high quality of machines offered on the market - Professional advice and support - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. products have the WE certificate We offer our own transport—prices are arranged individually per offer. We issue invoices with VAT separately listed. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Hfodpfx Aofk E Dzeb Eod Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Leto izdelave: 2025, Prod-Masz is your competent and professional partner for the manufacturing of sheet metal processing machines. Trust, honesty, and reliability are more than just words for us! Hjdpfx Ajcqu Sveb Esfd Compact folding machine 1250mm for steel sheets up to 0.8mm, aluminum sheets up to 1mm, with integrated beading machine - Adjustable clamping jaws - Weight: 49 kg - Bending beam width: 15mm - Working length: 1.25 m - Integrated beading machine –› pipe diameter 14mm - Clearance opening: 60mm - Bending angle: 145 degrees Price: €1,100 Shipping Germany-wide: €180 Optional rotary shear: €350 Cash payment upon delivery We look forward to hearing from you.

Stanje: rabljeno, Manual folding machine KRAMER Type AMS 650 x 1.5 Manual folding machine, bending bench Year of manufacture: approx. 1985 Working length: 650 mm Sheet thickness at 40 kg/mm²: 1.5 mm Upper beam opening: approx. 60 mm Folding beam adjustment: approx. 0–25 mm Bending angle: 0–180° - Upper beam adjustment via hand crank - Clamping rail for the folding beam - One-piece sharp rail 135° Space requirement (L x W x H): 1200 x 600 x 1100 mm Hodpfx Absdzqaao Ejfd Weight: 160 kg Good condition

Stanje: pripravljen za uporabo (rabljen), A screen printing system, including a machine table with XY adjustment, is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation is available. An on-site inspection is possible. Hsdpfowut Hajx Ab Eefd

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Laser for Product Marking – The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide variety of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software enables you to create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. Additionally, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. A handheld scanner can also be used. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options—such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc.—are available upon request. Made in Germany Hjdpsunh H Sofx Ab Eefd Fiber laser: 30W, 20W or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150 x 150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: exhaust system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Pilot laser (simple preview, contour preview) • Focus finder (user-friendly focus adjustment) • Status signal light • Max. workpiece height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard mount • Aluminum profile frame • Air-cooled • Door width: approx. 700 mm / pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg