Standardna traktorska enota

MAN TGX 18.500 BLS XXL Navi ACC Retarder

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1.035.000 km, moč: 426,59 kW (580,00 KM), prva registracija: 03/2019, vrsta goriva: dizel, konfiguracija osi: 4x2, gorivo: dizel, zavore: intarder, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Oprema: ABS, airbag, klimatska naprava, navigacijski sistem, parkirni grelec, računalnik na krovu, spojler, MAN TGX 18.580 D 38 Full-Air Suspension - First registration: 03/2019 - Kilometres: 1,035,000 - Retarder: Intarder - ADR AT (suitable for transport of hazardous goods) - Stationary air conditioning - Navigation system - LED headlights - Dual fuel tank - Double sleeper bunk - Tyres: 50% tread remaining FINANCING OR CUSTOM LEASING PLANS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL HEADQUARTERS NAPLES DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER Iodpjwgy H Rjfx Af Toal MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated semi-trailer - Tanker – Lamberet - Schmitz - Isuzu - Fixed bed - Crane - Tipper - 4 axles - Rear 4 axles - Tway-T-Way-540- 460 hp - Xway-X-Way - Three-way tipper - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail lift - Refrigerated cell - Insulated with fridge - Panel van Domenico Truck srl declines any responsibility for discrepancies in technical specifications, optional equipment or features that may, in some cases, differ from those stated in the description. Please verify the characteristics of the specific vehicle.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels Isdofi Nmujpfx Af Teal - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee - Working width: 500 mm - Battery charger included - Quantity: 1 unit available Ijdpfxsc R S E So Af Toal - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Stanje: zelo dobro (rabljeno), A-4200-Tebel Ostekar Ostekar med en kapacitet på 10.000 L, Alfa Laval - Tebel, i god stand, 1 stk., lukket model med omrører, dobbelt kappe, isoleret. Opvarmningskappe på nederste halvdel af den cylindriske sektion • Cylinderlængde: 1.750 mm • Cylinderdiameter: 2.860 mm • Indvendig belysning • Inspektionslem med skydedør i toppen • CIP-tilslutning • Udgang: 4" Udløbshøjde: 400 mm Minimumsniveau Vægt: 2.800 kg (Mål: L x B x H): 3.350 x 3.000 x 3.200 mm Iajdpfjh A Hb Uox Af Tel

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 tons Frame opening at front: 1400 mm Stroke: 250 mm Side openings: 400 mm Table: 1250 x 1100 mm Ram: 1250 x 1100 mm Stroke: 250 mm Speed: Rapid downwards 400 mm/sec, rapid upwards 330 mm/sec, under load: 24-43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Depth: 1,800 mm Table ejector: 6 tons Cutting impact damping Iaodec Uwx Dopfx Af Tsl Pressure, time and stroke dependent control Two-hand operation

Stanje: novo, Tehnični podatki: Kapaciteta: 60 t Vgradna višina: 820 mm Maks. delovno območje: 820 x 300 mm Hod bata: 400 mm Vhodna hitrost: 6,1 mm/s Povratna hitrost: 10 mm/s Moč motorja: 3 kW Širina: 1460 mm Globina: 850 mm Višina: 2400 mm Teža, pribl.: 700 kg Oprema: - Stransko pomičen valj Iaedpfx Aek Nz Ndef Tsl - Prostorno delovno območje - Višinsko nastavljiva miza - Torzijsko toga konstrukcija iz varjenega jekla - Manometer - Fino nastavljanje tlaka - Dodatna ročna črpalka Ležajne prizme na voljo za doplačilo.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Ijdpfsfi Nmwex Af Tsal Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, prevoženi kilometri: 142.631 km, moč: 353 kW (479,95 KM), prva registracija: 10/2005, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 3, skupna širina: 2.550 mm, skupna višina: 3.850 mm, Oprema: ABS, ++ RENT ++ PURCHASE ++ RENT ++ PURCHASE ++ RENT ++ PURCHASE ++ Internal Number: #276 MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, Water Recovery System Superstructure * Wiedemann enviro tec * Super 2000 * Water recycling system * Tank capacity: 15,500 liters * Flushing water: 5,500 liters * Sludge volume: 10,000 liters * Tank tipping for discharge at 45° Vacuum System * Wiedemann & Reichhardt KW 4000 (water ring pump) * Approx. 4,000 m³/h * Approx. 20 m suction hose DN150 High-Pressure System * 2x URACA KD716 approx. 313 l/min at 160 bar * Approx. 140 m HP hose DN38 * Hydraulic hose reel with approx. 40 m DN16 Freshwater Pump * Speck NP25 50/120 approx. 50 l/min at 120 bar * Hydraulic hose reel with approx. 40 m DN13 Special Features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and high-pressure booms * Engine start controllable from the control cabinet * NMV start controllable from the control cabinet * Equipment cabinet with two flaps - both sides * Hose tray * Increased soundproofing for pump room * Centralized lubrication system Technical Data * GVW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Iodpsvh H Huefx Af Toal Special Equipment: Front axle load 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, curb mirror right electrically adjustable & heated, Comfortshift gearshift, flame start system, heated fuel filter, fuel tank: 600 L aluminum, auxiliary air heater Eberspächer D4S, seat cover/upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, underride protection front, front axle VOK-09 cranked Additional Equipment: Axle configuration: 8x2, trailer socket 24V / 7-pin, trailer socket ABS, anti-slip regulation (ASR), exterior mirrors electrically adjustable & heated, exterior mirrors wide-angle and electrically adjustable & heated on right, rear axle differential lock, EDC engine management, electronic braking system MAN-Brakematic, EURO 3 engine, cab: L, comfort driver's seat, tachograph, suspension: leaf/air, electric window lifts, generator 100 A, speed limiter system 80/85 km/h, rear axle HY-1350, interior pollen filter, body/chassis: chassis, rocker arm - EVB brake, steering column (steering wheel) adjustable, air compressor 1-cylinder, engine 12.8L - 353 kW diesel (D 2876 LF 12), trailing axle NO-08, liftable, radio pre-installation 24V, disc brakes rear axle, disc brakes front axle, side underrun protection, side windows, front axle stabilizer, bumper plastic version, rear underrun protection, electronic immobilizer, central locking, permissible total weight 32.00 t For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is required to independently verify the condition and equipment of the goods. Sale is made exclusively according to our terms and conditions and with exclusion of any warranty.

Stanje: novo, Wisniowski Industrial Sliding Gate 6 x 2 m List Price €16,800 Brand: Wisniowski Description Clear opening approx. 600 cm Leaf length approx. 800 cm Leaf height approx. 200 cm Including light barrier and 1 transmitter Isdpfx Aoh I Nvbsf Tsal Sliding direction from street side to the right, without galvanized base. Includes motor and keys Color: black Photos for reference Item condition: new Find more new and used items in our shop! International shipping costs on request!

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Iajdogcw Rmjpfx Af Tjl Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.