Tovorno vozilo za težke obremenitve

MAN TGS 33.470 6x6 mit HMF 3220 Ladekran

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Nlsdpfxog Sk T De Abisg Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, Leto izdelave: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without rotary shear We are your partner when it comes to sheet metal processing machines. Our commitment is to deliver high-quality and dependable work to exceed your expectations! Our success is rooted in our passion and dedication to our work! Technical data - Maximum working length: 1400 mm - Maximum steel sheet thickness: 2.0 mm - Bending beam width: 24 mm - Weight: approx. 190 kg (manual machine) - Upper beam can be adjusted in three positions - Maximum clear opening between beams: 80 mm Nlsdeb Hqa Eepfx Abieg - Nationwide delivery within Germany: 180 EUR - Price: 1450 EUR - Including transport wheels - Delivery time: weekly - Cash on delivery - Optional rotary shear (max. cutting performance up to 0.8 mm steel sheet): 350 EUR - Optional manual seam forming machine: 75 EUR - The machine complies with CE standards and includes a 12-month warranty. We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT. We look forward to hearing from you!

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER - 1x 9-ton SAF or BPW axle - 100% galvanized - Gross vehicle weight (GVW): 19,500 kg - Unladen weight: approx. 5,500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8 t with radio remote control (Teleradio) - Hydraulic rear extension, full width 2550 mm x length 1500 mm - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm - Fifth wheel height: approx. 1,050 mm - 1,150 mm (other heights possible) - Tire brands: Goodyear, Pirelli, or Continental with twin tires - Spare wheel with mounting bracket Nsdpfx Aekbyt Ijbielg - 24V 4.5kW electro-hydraulic motor for winch, loading platform, and rear extension - Custom modifications available on request - Choice of paint finish free of charge - All documents (COC, TÜV, etc.) for registration available For more info: kalepar *The pictures are for illustration purposes only. Copyright cannot be claimed.

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj Nledpfx Asyy A Iqobijg ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 495.000 km, moč: 537 kW (730,12 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65 R 22.5, konfiguracija osi: 8x4, gorivo: dizel, kapaciteta rezervoarja za gorivo: 1.000 l, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, Leto izdelave: 2017, Oprema: AdBlue, drugi rezervoar za gorivo, klimatska naprava, retarder, spojler, tempomat, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Remarks = Colour: Blue Details Manufacturer: Scania Model: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Odometer: approx. 495,000 km Engine: 730 HP / EURO 6 / 16-litre diesel / V8 Transmission: Scania Retarder R4100 First axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction GVW: 26,000 kg GCW: 160,000 kg Equipment 2 x 500L fuel tanks AdBlue NATO / 24 volt electrical system Warning beacon lights on roof Alcoa rims Toolbox PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto auxiliary heating Cabin Multifunction steering wheel Cruise control Sun visor 2 x bed Fridge Comfort seats Storage compartments Radio CD Player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Permissible total weight: 42,000 kg Transmission Gearbox: Scania Retarder R4100 Axle Configuration Front axle: Tyre size: 385/65 R 22.5; alloy rims; max. axle load: 8,000 kg; steered; suspension: leaf springs Middle axle: Tyre size: 385/65 R 22.5; alloy rims; lift axle; max. axle load: 8,000 kg; suspension: air suspension Rear axle 1: Tyre size: 315/80 R 22.5; twin tires; alloy rims; max. axle load: 13,000 kg; reduction: outboard planetary axles; suspension: air suspension Rear axle 2: Tyre size: 315/80 R 22.5; twin tires; alloy rims; max. axle load: 13,000 kg; reduction: outboard planetary axles; suspension: air suspension Functional Body manufacturer: Scania Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Nlsdjuu Ha Dspfx Abijg Price: On request

Stanje: novo, lastna masa: 5.500 kg, skupna masa: 19.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.100 mm, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, Oprema: žerjav, *KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER* - 1x 9 ton SAF or BPW axles - 100% galvanized - GVW: - Unladen weight: approx. 5500 kg Nedpfx Ajkqmuuebijlg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8t with radio remote control (Teleradio) - Full-width hydraulic rear extension: 2550 mm wide, 1500 mm long - Length: 11,800 mm - Length with extension: 13,300 mm - Width: 2,550 mm - Fifth-wheel height: approx. 1,050 mm – 1,150 mm (other heights available) - Tire brands: Goodyear, Pirelli, or Continental, dual tires - Spare wheel with mounting bracket - 24V 4.5kW electro-hydraulic motor for the winch, tail lift, and rear extension - Customizations possible upon customer request - Choice of paint color – free of charge - All necessary documents (COC, TÜV, etc.) for registration available For more info: *Pictures are examples. No copyright claimed.*

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Naprava demontirana iz proizvodne linije, delovala je do konca. Redno vzdrževana, pripravljena za uporabo. Nlodpfxjya Uubs Abijg

Stanje: zelo dobro (rabljeno), Stainless steel tank 1000 L Manufacturer: Willi Lermer Wiesbaden Capacity: 1000 L Stackable 10 units available Very good condition, direct from production! Njdpfx Abslbiiajielg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-36, prevoženi kilometri: 20 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, stanje pnevmatik: 100 odstotek, medosna razdalja: 4.325 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 93 l, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 8, Leto izdelave: 2026, Oprema: ABS, airbag, asistent za mrtvi kot, asistent za ohranjanje voznega pasu, centralno zaklepanje, dodatne luči, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, parkirni grelec, parkirni senzorji, računalnik na krovu, registracija tovornjaka, registracija vozila, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, vozilo za nekadilce, MB Sprinter 319 Bluetec - BusConcept Premium 2026 - Sitzplätze: 8/ 6+2 Nlsdpsi Ei Syefx Abiog Neu Fahrzeug. Ohne Zulassung mit 2 Jahren Garantie. Das Fahrzeug verfügt über die erforderlichen Dokumente und das europäische COC-Zertifikat. Seit 2005 sind wir auf dem europäischen Markt tätig und auf die Herstellung luxuriöser Reisebusse und Nutzfahrzeuge spezialisiert. Unser Unternehmen bietet maßgeschneiderte Produkte aus hochwertigen Materialien und mit modernen technologischen Lösungen. Unser Ziel ist es, neue Trends in der Branche zu setzen, polnische Ingenieurskunst zu fördern und unvergessliche, legendäre Reiseerlebnisse zu schaffen. Komplette Ausstattung auf Anfrage. Fotos dienen als Beispiel für ein Bestellfahrzeug. Bei Fragen stehe ich Ihnen jederzeit gerne zur Verfügung. Lieferbar in ca. 2 Monaten. - Kontaktieren Sie uns: Auto-Wardenga Irenäus Wardenga auch über WhatsApp

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Nedpfxsg Sk Tvs Abielg Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).