Cisterni tovornjak

MAN TGS 18.360 AKF Kambo / ADR

Stanje: rabljeno, Leto izdelave: 2024, Rear section Primera DMC 4200 l / Single-row conveyor / single-shot distributor heads for 16 rows / Long loading platform for rear section / drawbar with folding support leg / lower link hitch Cat. 3 / braked axle with parking brake / dual-line air brake system Nodpfx Ajuhnwvsl Djdb

Stanje: rabljeno, moč: 210 kW (285,52 KM), prva registracija: 11/2007, vrsta goriva: dizel, konfiguracija osi: 4x4, gorivo: dizel, barva: bela, vrsta prenosa: polavtomatski, število prestav: 8, emisijski razred: Euro 4, Leto izdelave: 2007, Oprema: ABS, električno upravljanje oken, filter saj, klimatska naprava, računalnik na krovu, servovolan, spojka prikolice, = Dodatne možnosti in oprema = - Merilnik vrtljajev - Električna zadnja stekla - Radio/CD predvajalnik - Kamera za vzvratno vožnjo = Dodatne informacije = Število valjev: 6 Prostornina motorja: 6.374 cc Lastna masa: 8.663 kg Nosilnost: 3.837 kg Skupna dovoljena masa: 12.500 kg Največja priklopna masa: 10.000 kg (nezavirano 750 kg) Ndjdpovk Nqnsfx Al Dsb Notranjost: siva APK (tehnični pregled): Nov TÜV ob dostavi Število ključev: 2

Stanje: rabljeno, prevoženi kilometri: 219.000 km, moč: 90 kW (122,37 KM), prva registracija: 01/1998, skupna masa: 4.800 kg, barva: oranžna, vrsta prenosa: mehanski, število sedežev: 2, Oprema: dvižna zadnja plošča, Radio, mehansko vzmetenje kabine, potovalni računalnik, zapora diferenciala, zavorni sistem, sistem kolutnih zavor, ogrevanje Menjalnik obnovljen pred manj kot 500 obratovalnimi urami. Ndjdpfx Aoxriv Ael Deb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 314.100 km, vrsta goriva: dizel, gorivo: dizel, barva: svetlo zelena, voznikova kabina: dnevna kabina, emisijski razred: euro2, Leto izdelave: 1998, Oprema: klimatska naprava, žerjav, IVECO EUROCARGO 100E15 - Kiper 4x2 - Leto 1998 DIESEL/ Euro 2 Kilometri: 314.100 Ročni menjalnik / Prostornina motorja 5961 / 105 kW Dovoljena skupna masa 10 t Nosilnost 3.900 kg / Medosna razdalja 3.690 mm Oprema: - Klima Ndsdjzbmtxepfx Al Djb Nadgradnja: - Kiper keson 4600x2280 mm - Dvigalo FASSI F50.22 * Ročno podaljšanje

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Nsdpfx Aswwl I Iol Dodb Teža stroja cca 3 t Potrebni prostor cca 0 m Vodila so bila obnovljena pred 10 leti.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: Ndsdpfxemhhyps Al Deb 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2025, Swing beam guillotine shear Ndedpfx Aslac Drjl Dob Cutting length: 3100 mm Material thickness (steel): 10 mm Blades suitable for stainless steel Cybelec touchscreen control Back gauge: 1000 mm Cutting gap adjustable via control Delivery time: 3 months

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 521 h, Notranja številka vozila: VTC30048 Na voljo takoj. Več informacij: Luis Lucena Viktoria Sologubova NEMŠČINA Manitou MHT 10180, močan teleskopski viličar ? Nosilnost 18 ton ? 521 delovnih ur Močan teleskopski viličar Manitou MHT 10180, proizveden leta 2020, z zgolj 521 delovnimi urami. Naprava ponuja maksimalno nosilnost 18.000 kg, maksimalno višino dviga 9,63 m in je opremljena s hidravlično nastavljivim nosilcem vil in paletnimi vilicami. Tehnične specifikacije: * Številka vozila: VTC30048 * Stanje vozila: rabljeno * Kategorija: teleskopski viličar * Proizvajalec: Manitou * Model: MHT 10180 * Serija: 129M ST4 S1 * Leto proizvodnje: 01/2020 * Letnik: 2020 * Delovne ure: 521 ur * Maksimalna nosilnost: 18.000 kg * Maksimalna višina dviga: 9,63 m * Maksimalni doseg: 5,56 m * Prazna teža s standardnimi vilicami: 24.000 kg * Tehnični pregled: nov * Prisotna CE oznaka Motor in pogon: * Proizvajalec motorja: Mercedes-Benz * Tip motorja: OM 934 LA * Razred emisij: Stopnja IV/Tier 4 Final * Cilindri: 4 * Prostornina: 5.100 cm³ * Moč: 129 kW (176 KM) * Maksimalni navor: 750 Nm pri 1.600 vrt/min * Prestavna škatla: hidrostatična * Prestavne stopnje naprej/nazaj: 2/2 * Maksimalna hitrost: 25 km/h * Potisna sila pod obremenitvijo: 15.970 daN * Pogon na vsa kolesa * Krmiljenje na vsa kolesa * Avtomatska negativna parkirna zavora * Hidravlična delovna zavora Hidravlični sistem: * Variabilna hidravlična črpalka Ndjdpfxoza Nq Rj Al Deb * Hidravlična zmogljivost: 205 l/min * Hidravlični tlak: 350 barov * Rezervoar za hidravlično olje: 290 litrov * Hidravlično nastavljiv nosilec vil Dimenzije: * Skupna dolžina z nosilcem priključkov: 6,65 m * Skupna širina: 2,52 m * Skupna višina: 3,00 m * Medosna razdalja: 3,75 m * Odtalnost od tal: 0,44 m * Premer obračanja na zunanji strani kolesa: približno 5,50 m * Naklon: 12° * Kot naklona: 105° Volumni: * Rezervoar za gorivo: 315 litrov * Rezervoar za AdBlue: 63 litrov * Hidravlično olje: 290 litrov * Motorno olje: 21 litrov Kabina in varnost: Zaprti ROPS/FOPS kabina, raven 2 Varnostni sistem v skladu s standardom EN 15000 Upravljanje s palico JSM Krmiljenje na vsa kolesa Okrogla opozorilna luč Delovna luč Zaščitna mreža kabine Velike pnevmatike za terensko uporabo Raven hrupa na mestu upravljavca: 80 dB(A) Zunanja raven hrupa: 107 dB(A) Oprema: * Proizvajalec: Manitou * Tip: PFF + POS + DL * Serijska številka: 53010702 * Leto proizvodnje: 2019 * Lastna teža: 1.900 kg * Nazivna nosilnost: 14.000 kg * Lega težišča: 1.200 mm * Hidravlično nastavljiv nosilec vil * Paletne vilice so vključene v dobavo Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije, diagrami obremenitev in videoposnetki so na voljo na zahtevo. Pridržujemo si pravico do napak, sprememb in medprodaje. ANGLIŠČINA Manitou MHT 10180 heavy-duty telehandler ? 18-tonne capacity ? 521 operating hours Powerful Manitou MHT 10180 heavy-duty telehandler manufactured in 2020 with only 521 operating hours. The machine offers a maximum rated capacity of 18,000 kg, a maximum lifting height of 9.63 m and is supplied with a hydraulically adjustable fork carriage and pallet forks. Technical specifications: * Reference number: VTC30048 * Condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 h * Maximum rated capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum forward reach: 5.56 m * Unlade

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Ndsdpfx Alew E Nnbe Dsb Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Ndodpoh Ek Daefx Al Djb - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.