Vakumska cisterna

MAN Naaktgeboren VACU PRESS 10.000 TGS 41.440 BB 8X4

++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++

1. Pump Unit
Suitable for vacuum and blowing operations with low heat generation: Vacu-Press 10,000, air-cooled 3-lobe rotary lobe blower
Iisdpfxswqblpo Ah Doh
Performance: 8,220 m³/hour (no-load)
Vacuum: 0.95 bar (0.05 bar abs.) at 100°C
Overpressure: 1.20 bar (2.20 bar abs.) at 125°C
Power consumption: max. 190 kW.

2. Sound Insulation
The Vacu-Press 10,000 pump is installed in a sound-insulated housing with intake, cooling air, and exhaust silencers. The doors of the soundproof enclosure and the inside of the sound dampers are made of stainless steel. The noise level of the suction unit is approximately 80 dB(A).

3. Stainless Steel Tank
Net capacity: Loading compartment 13.0 m³ (stainless steel tank)
Filter chamber 2.0 m³
Total 15.0 m³
Wall thickness: 6 mm
Design pressure: Full vacuum up to 2 bar overpressure
Design temperature: -20°C / +50°C
Filter chamber: Located at the front of the tank with a fully openable top cover
Discharge of filter chamber: Via large oval hatch. Watertight and pressure-resistant.

4. HI-LIFT Version
Intermediary frame and additionally liftable tank on the rear side, allowing tilting or bagging into big bags, skips, or containers
Discharge height (under slider): approx. 1,600 mm (with tank raised and tilted)
Lifting cylinders: Hydraulic, double-acting
Stroke: 1070 mm
Slider: DN300, pneumatically operated

5. Filter System
Filter chamber: cylindrical, diameter 1,800 mm, installed at the front in the tank with large oval hatch for emptying into the loading compartment. Separation efficiency: 99.95%
Class: BIA Class C for the filter material

6. Suction and Blowing Connection
Suction connection: redirected inside the tank on the left side with a large bend and replaceable wear plate, connection DN150 with hose coupling of your choice
Blowing connection: DN125 with hose coupling of your choice

7. Rear Cover
Hydraulically openable with internal cone and vent connection. Locking: Hydraulic with self-aligning wedge lock, ensuring equal force on each wedge for optimal sealing regardless of gasket thickness.

Chassis brand: MAN TGS 41.440 BB
Toolbox: rear left with 2 lockable lids, stainless steel
Storage box: rear left, open design V2A
Mudguards: galvanized with rubber band
Side underrun protection: according to legal requirements
Tipping axle: continuous tipping axle, mounted in cast steel.
Transfer gearbox: The OMSI transfer gearbox disconnects the drive line and transmits engine power to the pump. The engine can operate at optimal constant speed while allowing variable pump speeds. This is favorable for service life and reduces fuel consumption.

8. Operating System
Operation: electric, relay control
Control functions: Main switch, Work lamp on/off, Rotating beacon on/off, Select suction/blow, Start/stop suction, Start blowing with separate switch on right, Status indicator: Main switch, Blower oil pressure, Blower oil temperature, Work lamp, Rotating beacon, Cooling air flap, Free intake flap, Blow flap
Measuring instruments: Vacuum gauge

Accessories (included):
1. Speck water pump 701/140B with a water tank of approx. 1,000 liters and a 40-meter spray hose reel
2. Color RAL 2004
3. IFM level sensor for liquids (information provided by customer)
4. 6 work lights (2 left, 2 right, 2 rear on billboards), switched from the front

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.