Smetiarsko vozilo

MAN 26.320 TGS BL 6x2, Überkopflader/Frontlader, AC

Stanje: pripravljen za uporabo (rabljen), Max. operating temperature: 1120°C, heated length: 1000 mm, cooling length: 1850 mm, channel height: 40 mm, conveyor belt width: 110 mm, throughput speed: 100–1000 mm/min, split gas consumption: 1.5–2.5 Nm³/h, control panel: Siemens SIMATIC HMI, length: 5000 mm, width: 650 mm, height: 1350 mm, with integrated ammonia cracker GSP 25 FA, integrated gassing panel, protective gas supplied from ammonia cracker (ammonia supply by customer) + N2 purge gas as required, MSR unit with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection possible. Pedsq Ttz Eepfx Agpsgw

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industries and workshops. They are designed to heat larger areas such as factory halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up periods and can warm production halls, joineries, or carpentry shops as well as other production sites in a very short time. Solid wood and its by-products (e.g., solid timber board scraps, chips, sawdust, pellets, or briquettes) are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the German 1st BImSchV. - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow: 4,900 m³/h - Combustion chamber depth: 650 mm - Feed door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Combustion chamber negative pressure: 0.2-0.3 mbar - Flue draught requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable floor area: approx. 220 m² - Required space: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney pressure: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 200 mm - Further technical details can be found in the attached data sheet Podpfx Asvz Hq Hogpsgw The two hot air outlet pipes are located at the lower rear side of the furnace. A maximum of 20 meters of pipe per outlet is permitted for air distribution.

Stanje: novo, konfiguracija osi: 2 osi, skupna dolžina: 5.250 mm, skupna širina: 2.300 mm, skupna višina: 1.000 mm, barva: rdeča, Leto izdelave: 2025, Nosilnost: 24.000 kg Pedpsv R I Nvjfx Agpjgw

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800x1170x2280 mm Pgjdpfsvz Hq Tjx Agpjw Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces represent an ideal solution for energy utilization in woodworking industrial and craft enterprises. They are designed for heating larger usable areas, such as workshops and production halls in craft and industrial operations. These hot air systems require no long heat-up phases and can quickly heat the workshop, joinery, or other production areas. Fuel used includes solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages required by the 1st German Federal Emission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90 % - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical details, please refer to the attached datasheet The two pipe connectors for outgoing hot air are located at the rear lower section of the furnace. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 Pgjdjvz Hqyspfx Agpsw The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industry and craft enterprises. They have been specifically designed for heating large work areas, such as workshops and workspaces in trade and industrial businesses. These hot air systems require no lengthy preheating phases and quickly warm up carpentry or joinery shops as well as other production facilities. Suitable fuels include solid wood and wood processing by-products, such as solid wood panel residues, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392/CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the required emission values in accordance with the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirements: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference): 350 mm - Efficiency: 85–90% - Chimney pressure: 11.5 Pa - Flue gas temperature: 289°C - Hot air outlet connectors: 2 x Ø 450 mm - For further data, please refer to the attached data sheet The two pipes for the outgoing hot air are located at the lower rear of the furnace. For each pipe, a maximum duct length of 20 meters is permissible for air distribution. Greater lengths are optionally available by agreement with the manufacturer. Please contact us for details.

Leto izdelave: 2024, obratovalne ure: 350 h, Stanje: rabljeno, Power: 54 kW (74 HP) Lifting capacity: 2,500 kg Podpfx Aowmv Idogpegw Contact Jan De Lepeleer for further information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, skupna dolžina: 1.850 mm, Prodajam STOW prečke v idealnem stanju, na zalogi več kot 5000 kosov -1850 mm Pjdexprfzopfx Agpegw -120x50, 3000 kg