Tovornjakovo podvozje

MAN 26.310 6x2 Hydraulik

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) Lrsdegwbbqjpfx Ahusn No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270° Ledpjd Nt Rqsfx Ahuorn

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Lsdpfxedh Tfgs Ahuern Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Lrsdpfx Aheh Ryhneuen Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates Ledod Tyvxepfx Ahuern - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D Lsdpfx Aolikvhjhusrn X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) Lodjhvahhspfx Ahujrn EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used pallet racking beam from the manufacturer Redirack for sale. Technical data for the pallet racking beam: Racking system: Redirack Scope of delivery includes: 01x pallet racking beam, used Colour: orange Box profile: 160 x 50 mm Lredpedyqg Ejfx Ahuen Clear span: 3,610 mm Max. load per pair of beams: 3,500 kg, with evenly distributed load 02x safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Our range of services: (Prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Inspection according to DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Lodpfx Asivawpjhusrn Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), COMPLETE 4-SIDED EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Loading portal (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided sizing and edge banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Workpiece turning device (90° LONGITUDINAL to TRANSVERSE) "RBO" Model GPK 1 X03001D) 2nd double-sided sizing and edge banding machine "BIESSE" Stream SB 2 - 11 Lrjdpei Rbg Tsfx Ahuon X03001E) Workpiece turning device (90° TRANSVERSE to LONGITUDINAL) "RBO" Model GPK 2 X03001F) Unloading portal (with 2 unloading stations) "RBO" Model Winner S 3200