Pakirni stroj MAIR OFF-LINE .90.4.F

MAIR OFF-LINE Packing line .90.4.F

Stanje: rabljeno, Automatic packing machine Manufacturer: MAIR Model: .90/D/5/SL Automatic strapping machine with timber insert Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Round diameter: 16 - 90 mm Cgsdovtp Hbjpfx Agueu Thickness range: 0.8 - 5.0 mm Length: 3.5 – 10 m INCLUDES: - Roller conveyor (approx. 24 m) with 2 sections - MAIR .90/D/5/SL, for hexagonal and rectangular bundles - Side bundle conveyor for strapping - ITIPACK automatic strapping machine SKE_M_TS-31J-WILT_4MR, with automatic insertion of wooden battens on all 4 sides - Longitudinal chain conveyor for strapped bundles - Bundle weighing and coolant draining station - Cross chain section for storage - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3.5 - 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Max. bundle weight: 3 t

Stanje: rabljeno, OTO 101.3 Tube Mill Line Manufacturers: OTO MILLS, SEUTHE, and THERMATOOL The line is currently operational and can be inspected during production. The line is complete with: - OTO MILLS entry line with double decoiler, end-to-end welder, and accumulator - CANTI-SAG TWL RS90 forming, sizing, and Turkish heads - THERMATOOL CFI 300kW high frequency welder - SEUTHE TS90 flying saw - ATTL automatic packaging unit - ITIPACK strapping unit - OSU metallizing unit Technical data: - Diameter: 32 – 101 mm - Squares: 20 x 20 – 70 x 70 mm - Rectangles: 40 x 20 – 80 x 50 mm - Wall thickness: 0.8 – 3.0 mm - Tube length: 4 – 10 m - Voltage: 380V / 50Hz AC - Working direction: Left to right - Material: Carbon steel – Hot rolled, pickled, galvanized, cold rolled - Yield strength: 330 – 520 N/mm² - Coil weight: 2 x 6,000 kg - Coil width: 50 – 250 mm - Coil inner diameter: 508 – 610 mm - Coil outer diameter: 1100 – 2000 mm Scope of supply: 1. OTO MILLS entry line with double decoiler, end-to-end welder, and accumulator 2. Forming, sizing, and Turkish heads 3. THERMATOOL 300kW welder 4. Fume extraction system 5. Cooling tunnel 6. Tube straightener 7. SEUTHE flying saw 8. Roller conveyor 9. Automatic packaging unit 10. Itipack strapping machine Csdpfx Aoyl Uicegujgu 11. Electrical system 12. Pneumatic system 13. Hydraulic system Tube diameter: 32 – 101 mm Squares: 20 x 20 – 70 x 70 mm Rectangles: 40 x 20 – 80 x 50 mm Wall thickness: 0.8 – 3.0 mm Tube length: 4 – 10 m Direction: Left to right Material: Carbon steel – Hot rolled, pickled, galvanized, cold rolled Yield strength: 330 – 520 N/mm² Coil weight: 2 x 6,000 kg Coil width: 50 – 250 mm Coil inner diameter: 508 – 610 mm Coil outer diameter: 1100 – 2000 mm

Stanje: rabljeno, SIGNODE AUTOMATIC STRAPPING STATION, Model M400 The completed package is automatically transferred via the motorized rollers of the evacuation carriage to the automatic system. It stops at the programmed strapping positions to allow the automatic application of steel straps. The system consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼") wide steel strap, 0.9 mm wall thickness - 450 kg strap dispenser with electric uncoiler - Control panel SIGNODE automatic strapping machine: Model M400/PA/TSM for vertical strapping Pneumatic floating strapping head: for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap Cjdpfewxxz Rex Aguegu 450 kg strap dispenser: with electric uncoiler Control panel: Included

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: omejena funkcionalnost, skupna masa: 3.000 kg, skupna dolžina: 1.500 mm, skupna širina: 700 mm, skupna višina: 600 mm, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2010, Joint Strip Oto Mills (spajalnik trakov), oprema primerna za spajanje trakov na vhodu v akumulator profilirke. Csdpoxmaa Iefx Aguogu

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), skupna višina: 1.300 mm, največja dolžina izdelka: 4.500 mm, Pipe production line from 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt welding machine, as well as a cold saw for precise pipe cutting. It is suitable for round pipes with diameters from Ø16 to 63.5 mm and offers a feed speed of up to 120 m/min. Consider the option to purchase this Bazhou Wanxin pipe production line. Contact us for more information. • Dual-station decoiler • Function: Passive coil unwinding • Design: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, easy operation • Hydraulic shear and butt welding machine • Function: Cutting front and rear strip ends, centering and subsequent welding • Design: Manual hydraulic shear with cantilever; front/rear pressure rollers; front/rear centering rollers; welding fixture • Cutting method: Hydraulic shear • Pressing method: Twin-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during coil changeover • Design: Frame structure with movable and fixed frames (incl. feed unit) • Feed speed: up to 120 m/min • Accumulating speed: up to 200 m/min • Accumulated strip length: 200–400 m • Pinch roll motor: AC 11 kW • Forming and sizing mill • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reduction gear: hardened gearbox; gears: spiral bevel gears • Entry/Forming: Passive 5-roll straightener; vertical rollers for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/Pressing/Deburring/Cooling/Sizing: 6 horizontal + 5 vertical roll stands; 1 round sizing stand • Round sizing stand: 1 smoothing unit; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, material 40Cr, quenched and hardened • Horizontal roller shaft: Ø60 mm, bearing seat 55 mm, material 40Cr; surface hardness HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, tempered/quenched and hardened • Bearing slides: Forged steel 45# • Stand type: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stand material: Welded, stress relieved • Pinch roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knives: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cutting pipes to preset lengths at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feed motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feed mode: Servo multi-stage speed • Tracking speed: up to 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducing gearbox: Model KK-80 • Saw stroke (rack length): 3 m Note • The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding. Additional equipment • Conveyor roller table, table, and packaging machine • Function: Automatic pipe transfer from the rolling mill to the table; packaging into hexagonal bundles • Roller table length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW Cgjdpfx Agjyhfvleusu

Stanje: rabljeno, Enota za varjenje začetka/konca OTO MILLS, 100% avtomatska Model GG566 – Popolnoma avtomatiziran proces spajanja in varjenja – Izhodna miza za trakove z enkoderjem – Motorizirani izhodni stiskalni valj OTO Mills Cedeymatvepfx Aguegu 100% avtomatska enota za varjenje začetka/konca: GG566

Stanje: rabljeno, Automatic Packaging Machine MAIR, MPS RH150/D/4/SL Cgodpfsymahyjx Agueu & SIGNODE Automatic Strapping Unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL The MPS RH150/D/4/SL Pat. model automatically packs round tubes into hexagonal bundles. The machine enables automatic strapping operations at a fixed position, with the bundle laterally moved and automatically stopping at pre-programmed strapping positions. It consists of: - Four-tube chain conveyors with support teeth and intermittent drive for lifting one tube at a time from the threading machine to the alignment area. - A powered roller for aligning the tube against an adjustable end stop before forming the row. - Two holding areas for the tube row; necessary during the bundle evacuation cycle. - A robust welded structural steel frame, forming a bridge. - A tube row handling system that collects one row of tubes at a time from the second-row storage and places it on the bundle formation supports. - Handling is performed using a series of electromagnets that rotate during the row transfer cycle; - Four powered vertical supports for forming and holding the bundles. These feature adjustable blades according to the required size and shape of the bundle and lower to allow the bundle to be placed on the evacuation cart. - Powered evacuation cart sliding on rails fixed to the floor and equipped with powered lower rollers and pairs of free vertical retention rollers. - Powered flat conveyor for transporting the bundle after the strapping area. - Powered storage chains suitable for advancing the bundles to the selected count. - Draining station for lifting the bundle, allowing coolant to exit the tubes; equipped with two hydraulically operated devices powered by a hydraulic power unit. - Control cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred by the powered rollers of the evacuation cart to the automatic strapping system. It stops at programmed strapping positions to allow the automatic application of steel strapping. It consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼”) wide steel strap with 0.9 mm wall thickness; - 450 kg strap dispenser with electric payoff - Control panel 3. WEIGHING STATION, model KG8/DY The station weighs tube bundles using load cells. Powered storage chains transfer the bundles into the weighing position. The weighing station is located below the pneumatic lifting devices that raise the bundle for weighing. It consists of: - Lower frame for floor fixation, complete with four supports, couplings, and load cells - Upper clamping frame, able to receive the bundle lifting devices - Compact weight transmitter 4. SOFTWARE, model DATAPACK 3/T The Datapack Management System software enables the operator to: - Monitor and supervise tube production in real time - Set new bundle configuration according to the required parameters

Stanje: rabljeno, Emballageuse automatique Fabricant : MAIR Modèle : .90.D.6.SL Flejeuse automatique avec insertion automatique de liteaux de support en bois sur les 4 côtés Fabricant : ITIPACK Modèle : SKE_M_TS-31J-WILT_4MR Plage de travail : - Diamètre rond : 16 - 90 mm - Plage d'épaisseurs : 0,8 - 5,0 mm - Longueur : 4 - 12 m INCLUS : - Convoyeur à rouleaux (env. 24 m) avec 2 sections - MAIR .90/D/6/SL, pour paquets hexagonaux et rectangulaires - Convoyeur latéral de paquets pour le cerclage - Flejeuse automatique ITIPACK avec insertion de bois - Convoyeur à chaîne longitudinal pour paquets cerclés - Station de pesée des paquets et vidange de lubrifiant - Section chaînes transversales pour stockage - Armoire électrique et pupitre opérateur Épaisseur : 0,8 - 5,0 mm Diamètre du tube : 16 - 90 mm Cgodpfx Ajyma Adjgusu Longueur : 4 - 12 m Paquet carré : 200 x 200 mm - 650 x 520 mm Paquet hexagonal : 230 x 200 mm - 600 x 520 mm Poids max. du paquet : 2 t

Stanje: rabljeno, HORIZONTALNI AKUMULATOR HA506RT OTO MILLS Širina traku: do 500 mm x 6,0 mm Delovno območje · Širina traku: maks. 500 mm · Debelina: 1,5 – 6,3 mm · Material: toplo valjan (HR), pocinkan, lužen Cedpjymarxefx Aguogu Horizontalni akumulator · Visoko zmogljiv horizontalni akumulator · Pogonski vlekalni valj · Motor in prenos pogonskega valja: 106 kW DC · Zunanji obročni vrtljivi stroj · Glavni motor vrtljive mize: 106 kW DC · Zunanja miza cca 6 metrov z vertikalnimi valji · Notranji obroč Prehod traku · Stolp za prehod traku · Zgornji in spodnji vodilni valji za trak Nadzorna plošča · 1 plošča za upravljanje akumulatorja Širina traku: maks. 500 mm Debelina: 1,5 – 6,3 mm Material: toplo valjan, pocinkan, lužen

Stanje: rabljeno, MULTI-HEAD PIPE CUTTING MACHINE TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutting Machine: - 7 independent cutting heads - All heads can be raised independently - Linear guide with scale for positioning the cutting heads Cgsdpfxeymaw Us Agusu - Centralized tube transport system with production cycle adjustment 3. Double RA3 collection cradle, featuring: - Independent cradles for collecting cut tubes - Side spacers in the cradles to adjust the length to the tube - Endless motorized slings for gentle tube collection Note: The double cradle system allows packaging and strapping in cradle 1 while production continues, eliminating the need to stop the machine. 4. Main electrical cabinet and control panel. NOTE: - This machine has operated very few hours. - Mechanical condition is very good. - Only cleaning and repainting are required to be “like new.” Max. input tube length: 8,000 mm Bundle loader capacity: 3 tons Max. loading capacity: 3,000 kg Round tubes (outer Ø): 12–60 mm Square tubes (HxW): 12x12–40x40 mm Rectangular tubes (HxW): 12x16–50x30 mm Min.–max. wall thickness: 0.8–3.0 mm (depending on yield strength) Cutting lengths: 330–7,900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disc diameter: 300 mm