Škarjasto dvigalo

Magni ES 2212E

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 4.710 mm, • 4WD, 4WS (Allradantrieb, Allradlenkung) • Automatic stabilizers for working at height • Automatic pothole protection • Anti-entrapment protection • Generous ground clearance • Self-locking door • Speed limitation at maximum lift height • Automatic braking system • Emergency braking solution • Non-marking tires • Tilt control with warning notification • Audible lowering alarm and dual LED beacon • Safety bar for maintenance work • Horn • Cylinder lock valve • Emergency stop button • Emergency lowering • Drive motor protection • Tie-down lugs • On-board diagnostics • Hour meter • Proportional control • Foldable guardrails • Platform power supply • Platform extension • Load capacity 600 kg • Load capacity (extended): 600 kg • Maximum number of persons (indoor/outdoor): 2/2 • Working height: 22 m • Platform height: 20 m • Overall length: 4.72 m • Overall width: 1.25 m • Overall height (guardrails raised): 3.82 m • Transport height (guardrails folded): 2.99 m • Wheelbase: 3.18 m • Turning radius (inside): 0.5 m • Turning radius (outside): 2.5 m • Drive speed (retracted): 3 km/h Nedpjyb Tp Hofx Abbscl • Drive speed (extended): 0.5 km/h • Battery: 48V/630Ah • Lead-acid batteries • Integrated battery charger 48V/60A • Gradeability 25% • Maximum permissible tilt: 1°/0° • Non-marking tires 28x10x22 • Weight (CE): 12,350 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HR15149, Leto izdelave: 2025, nosilnost: 7.000 kg, dvižna višina: 34.700 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 3.260 mm, moč: 155 kW (210,74 KM), širina nosilnega okvirja vilic: 2.000 mm, dolžina vilic: 1.200 mm, lastna masa: 24.000 kg, skupna dolžina: 8.860 mm, vrsta pogona: Diesel, gradbena širina: 2.500 mm, Rotating Telehandler Chassis number: HR15149 Fork width: 150 mm Fork thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Condition: New machine Technical condition: New Front tires type: Solid rubber Front tires size: MITAS EM60 17.5 R25 22PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: MITAS EM60 17.5 R25 22PR Rear tires condition: New Description: 12 months factory warranty / Max. 2,000 operating hours Njdpfx Aewruqzebbjcl Sideshift, Rear work lights, front work lights, heater, STVZO road approval, full cab, air conditioning, interior mirror, exterior mirrors, joystick, LED lighting, seat, Wheel chocks, machine maneuvering via radio remote control, preparation for work platform with winch, TÜV inspection preparation, 20 km/h, mechanically adjustable textile seat with headrest (GRAMMER), EcoStop, 2 cameras (telescopic head, right side) with display in the cab.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 2452288, moč: 3,3 kW (4,49 KM), nosilnost: 750 kg, dvižna višina: 20.000 mm, dolžina platforme: 4.300 mm, širina platforme: 1.190 mm, skupna masa: 12.350 kg, transportna dolžina: 4.720 mm, transportna širina: 1.250 mm, transportna višina: 2.990 mm, vrsta goriva: električni, barva: rdeča, Oprema: UVV varnostni pregled, Tehnični podatki Leto izdelave: 2021 Motor: Električni 4x32 VAC / 3,3 kW Delovna višina: 22,00 m Višina platforme: 20,00 m Razširitev platforme: 1,80 m Nosilnost: 750 kg Nosilnost pri raztegnjeni platformi: 750 kg Teža: 12.350 kg Nsdpfx Abjxv Scyjbjcl Dimenzije platforme (D x Š): 4,30 m x 1,19 m Skupne dimenzije (D x Š x V): 4,72 m x 1,25 m x 3,18 m Vozna hitrost: 0,5 - 3,0 km/h Dvigalo: 2x48VDC / 8,0 kW Najvišja vzpenjalna sposobnost: 25% Popolnoma delujoče, običajni znaki uporabe, UVV

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 2452918, nosilnost: 750 kg, lastna masa: 12.350 kg, transportna dolžina: 4.720 mm, transportna širina: 1.250 mm, transportna višina: 2.990 mm, vrsta goriva: električni, barva: rdeča, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Technical data: Electric wheel drives Platform: 4.30 m x 1.19 m Platform extension: 1.80 m Non-marking tyres Power outlet in basket Foldable guardrail Removable control panel Nsdpfx Abjt Tyk Hebecl Climbing ability: 25% Stabilizers: yes General signs of use, UVV inspection, fully functional

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 30 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina aluminijaste pločevine: 50 mm, The Durma HD-F 3015 Fiber Laser Cutting System with 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine designed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability, and outstanding customer service. Features: 30 kW / 80 mm mild steel, 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal length F300 mm Conveyor system Technical Data: Power output: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis travel: 160 mm Maximum simultaneous speed: 170 m/min Maximum simultaneous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeatability: +/- 0.02 mm Product Description of the Durma HD-F 3015 30 kW: Powerful and Efficient: Equipped with a 30 kW fiber laser, the Durma HD-F 3015 delivers outstanding cutting performance and precision for a variety of materials, including steel, aluminum, and copper. Generous Working Area: With a working area of 3,000 x 1,500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC Control: The user-friendly and precise control system allows for easy operation and optimizes cutting paths to minimize material waste. Automatic Nozzle Changer System: This feature increases productivity and reduces downtime during nozzle changes. Energy Efficient: The laser boasts high energy efficiency, resulting in lower operating costs. Robust Construction: The machine is designed for durability and reliability, even under demanding working conditions. Safety: Comprehensive safety features ensure secure operation. Njdpfxoq Nl T Tj Abbocl Versatility: Compatible with various laser cutting software solutions, making it suitable for multiple industries. Durma Maschinen GmbH – Your Reliable Partner: As the manufacturer of the Durma HD-F 3015, we at Durma Maschinen GmbH are proud of our rapid and efficient service as well as our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting requirements. Interested in the Durma HD-F 3015 30 kW? Contact us for a non-binding consultation or a customized offer. At Durma Maschinen GmbH, we are happy to assist you with any questions and to find the best solution for your needs. We look forward to your inquiry!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 2452928, nosilnost: 750 kg, lastna masa: 12.350 kg, transportna dolžina: 4.720 mm, transportna širina: 1.250 mm, transportna višina: 2.990 mm, vrsta goriva: električni, barva: rdeča, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Technical data: Electric wheel drives Platform: 4.30 m x 1.19 m Platform extension: 1.80 m Non-marking tyres Power outlet in basket Foldable guardrail Removable control panel Climbing ability: 25% Stabilizers: yes General signs of use, UVV inspection, fully functional Ncodpfxst Tyk Tj Abbjl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 2452298, nosilnost: 750 kg, lastna masa: 12.350 kg, transportna dolžina: 4.720 mm, transportna širina: 1.250 mm, transportna višina: 2.990 mm, vrsta goriva: električni, barva: rdeča, Oprema: UVV varnostni pregled, pogon na vsa štiri kolesa, Technical specifications: Njdpfx Ast Sk Dnobbecl Electric wheel drives Platform: 4.30 m x 1.19 m Platform extension: 1.80 m Non-marking tyres Outriggers Socket/outlet in basket Folding guardrail Removable control panel Gradeability: 25% All-wheel drive, general signs of use, valid safety inspection (UVV), fully functional

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 69 h, številka stroja/vozila: PB14740, Pogonski sklop Vrsta goriva: LPG Teža Lastna teža: 2.430 kg Funkcionalnost Dvižni steber: zgibna roka Dvižna zmogljivost: 200 kg Delovna višina: 1.760 cm Dodatne informacije Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Nsdeu Rl Adjpfx Abbscl Največji vodoravni doseg: 920 m Transportne dimenzije (D x Š x V): 5,21 x 0,79 x 1,95 m Dodatne informacije Za več informacij se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 4.720 mm, • 4-Rad-Antrieb, 4-Rad-Lenkung • Automatische Stabilisatoren für Höhenarbeiten • Automatischer Schlaglochschutz • Einklemmschutzsystem • Hohe Bodenfreiheit • Selbstverriegelnde Tür • Geschwindigkeitsbegrenzung bei maximaler Hubhöhe • Automatische Bremsanlage • Notbremssystem • Nicht-markierende Reifen • Neigungskontrolle mit Warnhinweis • Akustischer Absenkalarm und LED-Doppelblitzleuchte • Sicherheitsbügel für Wartungsarbeiten • Signalhorn • Zylindersperrventil • Not-Aus-Taste • Notablassfunktion • Schutz des Fahrantriebs • Anschlagösen • Borddiagnosesystem • Betriebsstundenzähler • Proportionalsteuerung Ncodex Avxlopfx Abbjl • Klappbares Plattformgeländer • 230V/AC-Steckdose auf der Plattform • Plattformverlängerung • Tragfähigkeit 600 kg • Tragfähigkeit ausgefahren 600 kg • Maximale Anzahl Personen (innen/außen) 2/2 • Arbeitshöhe 22 m • Plattformhöhe 20 m • Gesamtlänge 4,72 m • Gesamtbreite 1,25 m • Gesamthöhe (Geländer ausgeklappt) 3,82 m • Transporthöhe (Geländer eingeklappt) 2,99 m • Radstand 3,18 m • Wenderadius (innen) 0,5 m • Wenderadius (außen) 2,5 m • Fahrgeschwindigkeit (eingerückte Plattform) 3 km/h • Fahrgeschwindigkeit (ausgefahrene Plattform) 0,5 km/h • Batterie 48V/630Ah • Blei-Säure-Batterien • Integriertes Ladegerät 48V/60A • Steigfähigkeit 25 % • Maximale zulässige Neigung 1°/0° • Nicht-markierende Reifen 28x10x22 • Eigengewicht (CE) 12.350 kg

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 4.670 mm, • 4 WD, 4 WS • Automatic stabilizers for working at height • Automatic pothole protection • Anti-entrapment system • Generous ground clearance • Self-locking door • Speed limitation at maximum lift height • Automatic braking system • Emergency braking solution • Non-marking tires • Tilt control with warning message • Audible lowering alarm and double LED beacon • Safety bar for maintenance work • Horn • Cylinder lock valve • Emergency stop button • Emergency lowering • Drive motor protection • Lifting eyes • On-board diagnostics • Hour meter • Proportional control • Foldable guardrail • Platform power supply • Platform extension • Load capacity 600 kg • Load capacity (extended) 600 kg • Max. number of persons (indoor/outdoor) 2/2 • Working height 22 m • Platform height 20 m • Overall length 4.72 m • Overall width 1.25 m • Overall height (guardrail up) 3.82 m • Transport height (guardrail folded) 2.99 m • Wheelbase 3.18 m Ncsdpfx Asx Avwujbbjl • Turning radius (inside) 0.5 m • Turning radius (outside) 2.5 m • Travel speed (retracted) 3 km/h • Travel speed (extended) 0.5 km/h • Battery 48V/630Ah • Lead-acid batteries • Integrated battery charger 48V/60A • Gradeability 25% • Max. permissible inclination 1°/0° • Non-marking tires 28x10x22 • Weight (CE) 12,350 kg

Leto izdelave: 2024, Stanje: novo, Roboterportal-System für das Schneiden von Blech und Profilen 3D-Roboterportal-Anlage für Plasma- und Autogen-Brenn­schneiden mit beidseitigem Antrieb sowie präzisem Positioniersystem über Zahnstangen und Ritzel auf allen drei Linearachsen – für außergewöhnliche Geschwindigkeit und Dynamik. Spielfreie Drehachsen ermöglichen die 4-seitige Bearbeitung von Profilen und Rundrohren. Präzisionsgetriebe mit minimalem Spiel, dynamische Kopplung der Antriebsmotoren an die Zahnstangen sowie ein verwindungssteifes Führungssystem gewährleisten sanfte Bewegungsabläufe sowie exzellente Schnittqualität – auch bei Ecken und kleinen Bohrungen. Das Portal verfügt über einen auskragenden Teil des Querträgers, der das Schneiden von Profilen in einer eigens dafür konzipierten Kabine ermöglicht. Verfahrweg Querachse (Y-Achse): auf Anfrage Verfahrweg Längsachse (X-Achse): auf Anfrage Ncjdpfx Abeh I Nw Dobel Verfahrweg Vertikalachse (Z-Achse): 1500 mm Verarbeitbare Träger- & Profiltypen: T-, L-, H-, U-Profile, Rechteck- und Rundrohre Maximale Trägerabmessungen: Breite bis 1200 mm Rechteckrohre: Querschnitt bis 600 x 600 mm HAUPTMERKMALE ▪ Robuste Stahlbauweise mit präzisen Linearführungen und Servoantrieben mit Zahnstange und Ritzel auf allen Achsen; ▪ Hohe Dynamik auf X-, Y- und Z-Achse: Verfahrgeschwindigkeit bis 30 m/min, Beschleunigung bis 3 m/s²; ▪ 3D-Steuerung über sieben Achsen ermöglicht ein fortgeschrittenes CNC-Programmierniveau; ▪ Maximale Maschinenauslastung dank kombinierten Blech- und Profilbearbeitungskonzeptes – 100% Nutzlast bei Wechseln, ohne Stillstandszeiten beim Be- und Entladen von Blechen, Profilen und Schnittteilen. ▲ PLASMASCHNEIDTECHNIK HYPERTHERM – auf Anfrage ▲ INSTALLATION UND SCHULUNG INKLUSIVE Installations- und Schulungsdauer ca. 15 Tage

Stanje: novo, vrsta goriva: električni, barva: rdeča, Oprema: pogon na vsa štiri kolesa, Technical Specifications Working height: 22 m Platform height: 20 m Ncodpfx Aoqya Erobbol Load capacity: 750 kg Climbing ability: 25% Total weight: 12,350 kg Drive: Electric Outriggers: Yes 24-month warranty on new equipment

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, moč: 26,6 kW (36,17 KM), nosilnost: 600 kg, dvižna višina: 20.000 mm, dvižna moč: 600 kg/m, dolžina platforme: 4.300 mm, širina platforme: 1.190 mm, skupna masa: 12.350 kg, lastna masa: 12.350 kg, transportna dolžina: 4.720 mm, transportna širina: 1.250 mm, transportna višina: 2.990 mm, gradbena višina: 3.820 mm, vrsta goriva: električni, velikost pnevmatike: 28 × 10 – 22 (Non-marking), stanje pnevmatik: 100 odstotek, medosna razdalja: 3.180 mm, odmik od tal: 200 mm, barva: rdeča, Oprema: UVV varnostni pregled, nagibni voziček, pogon na vsa štiri kolesa, === KEY SPECIFICATIONS === Year of manufacture: 2020 Operating hours: 8 h Machine width: 1.25 m Drive system: 4x2 Drivable at full height: Yes Platform extension: Yes (1.8 m) Power: 26.6 kW total (Lifting 2×8.0 kW + Drive 4×3.3 kW) Working height: 22.0 m Load capacity: 600 kg Drive type: Electric Battery type: Lead-acid 48V / 630Ah Self-leveling outriggers: Yes (standard) Platform size (L × W): 4.30 × 1.19 m Tyre type: Non-marking CE certification: Yes Weight: 12,350 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully sourced from reliable suppliers with verifiable history CE certification and complete documentation included Immediately ready for use and transportable Fully electric, low-noise, and emission-free Extendable platform (1.8 m) for expanded working area === CONDITION === Excellent condition, only 8 operating hours. Original batteries checked and in outstanding condition. Available directly from stock in Sittard. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide delivery available. Nsdpfx Asxb S Rnjbbecl Price on request (EXW / plus VAT). The Magni ES 2212 E is a fully electric scissor lift offering a 22 m working height and 600 kg load capacity. With its compact design, non-marking tyres, and zero emissions, it is ideally suited for indoor areas and maintenance work. CE-certified, low-maintenance, and immediately operational. === DELIVERY === Crane loading available on request. Flexible shipping options depending on destination and logistical preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Stanje: novo, Leto izdelave: 2025, The DURMA AD-S 611600 is a high-performance hydraulic press brake designed to deliver the utmost precision and efficiency in sheet metal processing. With a pressing force of 1600 tonnes and a working length of 6 metres, it is ideally suited for demanding applications, especially when working with large and thick materials. Technical specifications: - Model: DURMA AD-S 611600 - Pressing force: 1600 tonnes - Working length: 6 metres - Condition: As new, immediately available Features and benefits: - High bending accuracy thanks to state-of-the-art CNC control - Robust construction for long service life - Flexibility via backgauge control - Support for heavy and large sheets with integrated bending aid The machine is available for immediate delivery and can be inspected upon request. For further information or to arrange a viewing appointment, please do not hesitate to contact us. Nedpfxsvy Srao Abbocl