Kmetijski stroj

Verschiedene Felgen 20/22.5/24 Zoll

Stanje: dober (rabljeno), Maszyny z zakładu przetwórstwa miodu. Gorące komory DC Norris, zbiorniki do sedymentacji DC Norris, zbiorniki przechowalnicze DC Norris, zbiorniki do skrystalizowanego miodu, zbiorniki na super seed, pompy, zestawy filtracyjne, różne linie rozlewnicze do napełniania butelek typu squeezy, słoików szklanych oraz wiader plastikowych. Ijdepcibmepfx Adkstd

Stanje: rabljeno, approx. 15 t available Itedpfx Adsdc A Sieked

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Horizontalni transportni trak URBAN - TBA26/38 HQR, 7 kosov na prodaj. Možen je tudi posamičen nakup. Itedjtr Eqfspfx Adkjd

Stanje: novo, GEOMET-2000 Durchflussprüfstand zur Kalibrierung eines Turboladers mit variabler Turbinengeometrie ohne Wellenrotation. Dieser Prüfstand kann die Geometrie von vakuum-, luft- und elektronisch gesteuerten Turboladern kalibrieren. Das Gerät ist auf die Bedürfnisse von Werkstätten zugeschnitten, die Turbolader für Lkw und Pkw instandsetzen. Es ist außerdem für den Einsatz bei großformatigen oder nicht standardisierten Turbolader-Bauformen ausgelegt. Der GEOMET-2000 Durchflussprüfstand ermöglicht es einer Standardwerkstatt, professionelle Turbineninstandsetzungen anzubieten und so zusätzliche Kunden zu gewinnen. HIGHLIGHTS • Einstellung des Endanschlags der Luftstromregelung (variabler Turbinengeometrie), um den schädlichen "Überblas"-Effekt für den Motor zu verhindern. • Anpassung der Gestängelänge des Aktuators zur präzisen Bestimmung des Ansprechzeitpunkts der Verstellmechanik. • Überprüfung der Rückstellfederkraft des Aktuators zur detaillierten Diagnose von Vakuum- und Pneumatikstellern. • Funktionskontrolle des N75-Ventils bei Turboladern mit Unterdrucksteuerung, das zur Regelung des Turboladers im Fahrzeug beiträgt. • Abstimmung elektronisch geregelter Lader durch Anschluss eines externen Prüfers ATP-1000. • Vertikale Einbaulage des Turboladers und freie Arbeitsfläche – komfortabel und effizient für alle Turboladertypen. HAUPTMERKMALE Itedjn E N E Espfx Adkjd • Datenbank mit über 6200 Turboladerreferenzen • Erstellung eines Prüfplans für neue Turbolader nach Herstellervorgaben • Sämtliche Messungen in Echtzeit • Kalibrierung des Prüfstands vor Arbeitsbeginn • Automatische Kompensation von Umgebungsluftdruck und Temperatur • N75-Ventiltestfunktion • Integrierte Gebläsepumpe für konstanten Luftstrom • Eigenentwickelte Turbo Test Software • Erstellung und Ausdruck von Protokollen zum Abstimmungsprozess • Schnellspannvorrichtungen mit Magnetadaptern für Turbolader • Selbstdiagnosefunktion TECHNISCHE DATEN Max. Saugleistung der Vakuumpumpe: 180 m³ Erforderlicher Druck im Pneumatiksystem: 0,6 – 0,8 MPa Stromversorgung: 220V, 1Ph, 50Hz Leistungsaufnahme: 1,5 kW Abmessungen: 1190 x 520 x 1730 mm Gewicht: 255 kg

Leto izdelave: 2025, stanje: novo, Fruit belt press with a belt width of 1250 mm Hourly capacity up to 10,000 kg, depending on fruit type and ripeness 27 rollers, all-stainless steel construction with pre-juice extraction zone, main press roller profiled and enclosed, main press zone with 7 press rollers, high-pressure pressing zone with 6 press rollers, 2 post-press rollers Belt cleaning with rotary brushes and high-pressure water jet Infinitely variable speed control Ijdpsbpz D Ajfx Adkjtd Removable dosing box, powered dosing roller, height-adjustable Overall height 2.7 m

Stanje: novo, Leto izdelave: 2025, Model: K110 K230 K360 Območje dela: od 8649×1398×1811 mm do 10000×3500×2100 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja osi X/Y: 0,05 mm Ponovna natančnost pozicioniranja osi X/Y: 0,03 mm Maks. hitrost povezanega gibanja osi X/Y: 60 m/min 1. Integrirana popolna zaščitna kabina Integrirana zasnova zaščitnega pokrova, hitra namestitev na lokaciji bistveno skrajša čas inštalacije. 2. Bodor Genius T avtomatska ostrilna laserska glava z iglo Laserska glava Bodor Genius T z avtomatskim ostrenjem in igelno konico, primerna za vse vrste profilov, kot so kotniki, U-profili, I-profil itd. 3. Pravokotno varjeno ležišče Enostavna struktura in prilagodljiva postavitev. 4. Bodor Thinker 3.0 sistem Namenski nadzorni sistem za stroje za razrez cevi z najsodobnejšo tehnologijo. Omogoča neposreden razrez kotnikov in U-profilov brez potrebo po optimizaciji postavitve (nestingu) in vračanju v izhodiščni položaj. Itodpfxjg Rgt Ue Adkjd 5. Primerno za manjše premer vpenjanja Zadnje čeljusti lahko primejo cev in jo speljejo skozi sprednje vpenjalo, s čimer se fizična razdalja med lasersko glavo in zadnjimi čeljustmi občutno zmanjša. Repni ostanek je zmanjšan na 70 mm, izkoristek materiala se poveča na 99 %. 6. Ergonomija Natovarjanje in upravljanje z obeh strani; humaniziran interakcijski vmesnik omogoča udobno in enostavno uporabo ter prijetno uporabniško izkušnjo. 7. Integrirana zasnova Integrirana zasnova elektro omarice in glavnega ohišja prihrani prostor in standardizira napeljavo.

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: Itodpfx Adoh Etf Rekjd - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW Iedpowa Rhrofx Adkotd V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm Itodsk Af Svjpfx Adkjd - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: dober (rabljeno), 10,000 pcs Insert Grating Gratings for Pallet Racks, galvanized Insert gratings available in various sizes, mesh widths, load bars, and load capacities: Negotiable price: from €15.00 net per m² ex stock Larger quantities on request! Specifications: Insert Grating Mesh Size Load Bar Load Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used goods, very good condition, see photos. Goods in stock. Transport available on request. Itsdpfxjd Hvvas Adkod Inspection possible at any time by appointment. Further information on request. Over 5,000 linear meters of pallet racks from various manufacturers in stock at all times. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our Terms and Conditions, all prices excl. VAT ex stock.) Purchase / Sale We are continuously looking for or offering various items from different sectors - Swept-clean liquidations - Business closures - Fast – Flexible – Efficient! - We also clear out or dispose for insolvency administrators. Contact us with a few details, and we will get back to you promptly. To visit our site, please click on our logo!