Stroj za rezkanje in rezanje cevi FEIN

RDG - 18 - 2b

Leto izdelave: 1997, Stanje: rabljeno, številka stroja/vozila: 540897, Maximum pipe diameter: 1,500 mm Minimum pipe diameter: 200 mm Maximum tool diameter: 200 mm Feed rate: 40 mm / min Podpoghy Azofx Adyjgg Sawing of steel and cast iron pipes up to 22 mm wall thickness Milling of steel and cast iron pipes up to 15 mm wall thickness Cutting speed: 35 m / min Compressed air requirement: 6 bar – 2 m³ / min Weight: approx. 90 kg

Stanje: dober (rabljeno), prevoženi kilometri: 559.900 km, Leto izdelave: 2005, Oprema: žerjav, IVECO STRALIS 480 Pgodpfx Ajt Skzysdysg Year 2005 Euro 3 Km: 559,900 GVW: 26,000 kg Payload: 11,850 kg Wheelbase: 4,200 mm Fixed body: 5,600 x 2,550 mm, platform height: 1,250 mm BONFIGLIOLI P20000/XL 6SI crane Maximum lifting capacity: 3,410 kg Proportional control valve Remote control

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Znamka: Kleemann Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Pgodpfx Aou S Tqvedyeg Vključuje: Elektromotor Teža pribl. 38 ton

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm For more details, see the attached description! Podpfor A Dfysx Adyjgg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Podsu Dxb Tjpfx Adyjgg Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener.

Stanje: novo, Leto izdelave: 2023, Cutting diameter: 1100 mm Bandsaw blade length: 11,000 x 67 mm Cutting width: 1.6 mm Cutting range at 90 degrees (square): 1100 x 1100 mm Cutting range at 90 degrees (flat): 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space required: approx. 2,800 x 1,700 x 5,200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor spiral. A chip bin approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. On the outfeed side, there is a roller table measuring 1.40 x 1.00 meters. On the infeed side, there is a motorized roller table measuring 2 x 1.40 meters. Optional specifications: Pgodpfx Ajtq Dw Eedyjg - Motorized system for roller table - Laser line - Extra double roller table - PLC display - Anti-vibration system The images are for reference only and do not represent a true-to-scale depiction of the machine.

Stanje: dober (rabljeno), prevoženi kilometri: 306.000 km, prva registracija: 08/2012, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: zaviranje z motorjem, barva: črn, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: parabolično listje (vzmet), dolžina tovornega prostora: 4.840 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 920 mm, Leto izdelave: 2012, Oprema: električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, žerjav, = Dodatne možnosti in oprema = - Aluminijasti rezervoar za gorivo - Listnato vzmetenje - Ojačevalnik zavorne sile - Nizka raven hrupa - Omejevalnik hitrosti - Lahka aluminijasta platišča - Radio/CD predvajalnik - Kamera za vzvratno vožnjo - Spalna kabina - Senčno pokrivalo - Stacionarno gretje - Ksenonska razsvetljava - Pogonska gred (PTO) Pgedpjut Dzvsfx Adysg - Centralno mazanje - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Vzmetenje: parabolično listnato Prva sprednja os: vodena Druga sprednja os: vodena Prva zadnja os: redukcija: zunanji planetni osi Druga zadnja os: redukcija: zunanji planetni osi Teže Lastna teža: 19.625 kg Nosilnost: 19.375 kg Dovoljena skupna masa: 39.000 kg Funkcionalnost Dvigalo: EFFER 255/6S, letnik 2012, za kabino Črpalka: Da Kiper: zadaj Stanje Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: novo, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Working process: Once the workpiece support and side stops are set, the burr-laden workpiece is lightly pressed against the brush, which rotates on its own axis. The workpiece itself does not need to be rotated, as this motion is performed by the brush. The type of workpiece material, burr thickness, as well as the desired edge rounding determine the contact pressure and duration, typically around 1–5 seconds. Technical Data: Material: Steel, stainless steel and non-ferrous metals (motor speeds 700–1,900 rpm, stepless) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 or 3 pieces Ø 300 (250) x 35 Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Psdpfx Adod Hmnfeysgg Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max. speed 82 dB(A) Scope of delivery: GRATMAXX rotary head deburring brush machine with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement Brushes not included in delivery! Accessories: F50201 Circular brush braided wire 0.38 mm F50202 Circular brush steel wire 0.2 mm F50203 Circular brush steel wire 0.38 mm F50204 Circular brush stainless braided wire 0.38 mm F50205 Circular brush abrasive nylon U180 F50206 Circular brush abrasive nylon U120 F50207 Circular brush stainless steel wire 0.20 mm Further technical details can be found in the attached PDF document.

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Pgjdpfxefibd Ts Adyeg Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Pgjdsfg E Hlopfx Adyog Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice