Orodje Hob

Mod. 0,7-10 / 03-2,5

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Djdpet Hwucefx Alteuw Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Duodpfx Asdx D Tvsltsw Manufacturer: Walter Weight: 9.5 kg

Stanje: rabljeno, Mounting: MK 4 Dujdjb N Ezrepfx Altew

Stanje: rabljeno, Leto izdelave: 2008, x-hod 630 mm y-hod 560 mm z-hod 560 mm Duedpex A H Rljfx Altew Krmilnik iTNC 530 Heidenhain Območje vrtljajev - glavno vreteno max. 18.000 min⁻¹ Pogonska moč glavnega vretena 10 / 15 kW Maks. navor 130 / 87 Nm Vpenjalo orodja HSK-A63 Nagibno NC: ° Pritrdilna površina mize 1.000 x 600 mm T-utor 9x 14 x H7 Največja obremenitev mize 700 kg Število orodnih mest 60 poz. Vpenjalo orodja HSK-A63 Skupna potreba po električni energiji 49,7 kVA Teža stroja pribl. 11,0 t Prostorske zahteve pribl. 4,5 x 4,5 x 3,5 m Univerzalni CNC-obdelovalni center DECKEL MAHO - DMU 60 monoBLOCK - 4 osi (+ NC delilna glava) - Zasučna rezkalna glava - Vreteno obnovljeno - NOVE X,Y,Z vodilne tirnice - NOVE krogličnovijčne vretena (KGT) - NOV zaščitni mehur X-osi

Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (fixture): 450 mm Module - max.: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - infinitely variable: 130 - 1300 strokes/min Workpiece weight: 1000 kg Dusdpfx Alevu E Nuetjw Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximal distance table surface - tool spindle: 350 mm Manual column lateral displacement: +/- 25 mm Manual swivel angle of the tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 in Voltage: 400 V Frequency: 50 Hz Max. mains current: 70 A Total power requirement: 48 kW Machine weight approx.: 11 t Space requirements approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine: Gleason PFAUTER Mod. PSA 300 CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software. Application scope --> The PSA 300 is designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical gearing - Gears with internal helical gearing

Stanje: dober (rabljeno), FEATURES Table diameter ⌀: 3200 mm Maximum turning/swing diameter ⌀ - With the cross-rail forward: 3300 mm Dusdpfx Aljr I Aykotsw - With the cross-rail backward: 5600 mm Minimum turning/swing diameter ⌀ - With the cross-rail forward: 800 mm - With the cross-rail backward: 3100 mm Maximum turning height: 750 mm Control: FAGOR 8025 Headstock RPM (2 ranges): - 0.5 - 10 rpm - 10 - 40 rpm Motor power: 80 HP Maximum table load: 30,000 kg

Stanje: novo, Leto izdelave: 2024, The Just Lift Crane JL250 to JL750 from Just Lift has been designed to accelerate and optimize all lifting and logistics processes, increasing productivity while ensuring maximum safety and ergonomics for the operator. - Motorized drawbar head steering - Arm control via remote controls - Hydraulic lift and extension - Standard anti-tip system - 100% electric Max. forward driving speed km/h 4.0 Max. reverse driving speed km/h 4.0 Lifting system max. load capacity kg 250 to 750 No. of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Djdpfx Ajh Tx R Tjltjuw Arm retracting speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil capacity l 2.00 Weight without batteries kg 610 to 1,080 Net weight incl. 105/130A AGM batteries kg 680 to 1,146 Max. length mm 2,835 Min. length mm 1,891 Width mm 980 Handlebar/drawbar height mm 1,229 Max. height mm 3,030 Min. height mm 2,313 Max. lift height mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Currently, we can offer only new equipment.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vrsta goriva: dizel, barva: modra, obratovalna teža: 3.375 kg, Leto izdelave: 2025, Novi mini bager RIPPA R 32 Pro, japonski motor Kubota, 4 valji, 18,5 kW, emisijski standard Euro 5, Tier 4 Stage V, priprava za hidravlično prijemalo, klimatska naprava, kamera za vzvratno vožnjo, letnik 2025, hitra menjava orodij, 1000 mm nagibna žlica, garancija. Dodpfxewlvzue Altsuw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m Djdpfxevibc Ho Alteuw For profiling grinding worms for gear flank grinding machines. Suitable for finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM, ... Adjustable plate right with micrometer screw adjustment (axial) Adjustable plate left with micrometer screw adjustment (radial) 2 precision motor spindles for holding diamond wheels.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 27.000 h, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, skupna masa: 21.000 kg, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping area of 1000 × 800 mm, rapid traverse speeds up to 60 m/min, and a high-speed spindle with 18,000 rpm. The machine is equipped with a 60-position tool changer and a 980-liter coolant system. Accessories such as a chip conveyor, oil mist separator, and BLUM laser tool measurement further enhance the machine’s functionality. If you are looking for high-performance milling capabilities, consider the DMG MORI DMC 100U duoBlock we are offering for sale. Contact us for further information. • Worktable: • Number of pallets: 2 (operating/preparation area) • Clamping surface for pallets: 1000 × 800 mm • Pallet weight: 630 kg • Axis travel: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Positioning tolerance (X/Y/Z): 0.006 mm • Positioning tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max. diameter: 1000 mm • Max. height: 1600 mm • Max. weight: 2000 kg • Spindle: Dusdpfx Aex D Eh Ejltew • Torque: 119 Nm (40% duty cycle) • Tool changer: 60 positions • Coolant system: 980 liters, high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demonstration (video available) Additional equipment • 7 additional pallets • Chip conveyor • Oil mist separator • Infrared measuring probe • BLUM laser tool measurement • 3D Quick Set preparation • Cooling • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Complete manuals (English, Estonian, and digital copy)