Črpalka Napajalna črpalka Centrifugalna črpalka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140 2814, širina transportnega traku: 700 mm, najv. debelina pločevine: 4 mm, Rok za plačilo stroja je 18.05.2026! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu do 22.05.2026! TEHNIČNI PODATKI Širina traku: 60 - 700 mm Debelina pločevine: 0,5 - 4 mm Dolžina pomika: 0 - 700 mm Gjdey Nkdlepfx Anfebl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.750 mm, skupna širina: 2.800 mm, skupna višina: 1.830 mm, zahteva za prostor dolžina: 2.800 mm, potrebna širina: 2.850 mm, potrebna višina: 1.900 mm, proizvajalec motorjev: Bitzer, volumenski pretok: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid had its own cold store, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Gbedpfx Aox Ap Hpsnfel Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140 256.4, širina transportnega traku: 600 mm, najv. debelina pločevine: 4 mm, Rok plačila za stroj je 18.05.2026! Oddaja ponudbe zavezuje k pravočasnemu prevzemu do 22.05.2026! Gbedpfjy Nkb Dex Anfel TEHNIČNI PODATKI Širina traku: 600 mm Debelina pločevine: 0,5 - 4 mm Dolžina podajanja: brezstopenjsko nastavljiva 30 - 500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4004/1135, debelina transportnega traku: 3 mm, širina transportnega traku: 600 mm, moč: 5 kW (6,80 KM), Plačilni rok za stroj je 18.05.2026! Oddaja ponudbe zavezuje k pravočasnemu prevzemu najkasneje do 22.05.2026! TEHNIČNI PODATKI Širina traku: 100 - 600 mm Debelina traku: 0,5 - 3 mm Maks. obremenitev: 11 t Gbodpfjy Nkaajx Anfjl PODROBNOSTI O STROJU Napetost: 24 / 380 V Frekvenca: 50 Hz Moč: 5 kW OPREMA Razvijalna naprava Integrirana podajalna enota

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, 1 rabljen parni kotel ----- - montiran na okvirju - Proizvajalec: Bay Kessel - BBS Germany Tip: HDK 7000 Zmogljivost pribl.: 7.000 kg/h Obratovalni nadtlak: 10,0 bar Gjdpfx Anox A Dplofsbl Povišan preizkusni tlak: 18,5 bar Maks. temperatura pare: 184,6 °C Polna količina vode pribl.: 17.500 l Leto izdelave: 2017 CE oznaka: CE 0036 Opremljen s plinskim/oljnim gorilnikom Weishaupt WM-GL50/1-A, verzija ZM-R-NR, krmilno potjo za plin, ločeno nadzorno omaro, črpalko za napajalno vodo, Eco ter z obstoječimi grobimi in finimi armaturami.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2005, obratovalne ure: 38.534 h, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 29310001024, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 560 mm, model krmilnika: Heidenhain iTNC530, največja hitrost vrtenja: 18.000 obr/min, Aucune mise à prix – vente garantie à l'enchère la plus élevée ! DÉTAILS TECHNIQUES Course axe X : 750 mm Gbodpfxey Ib H Ie Anfol Course axe Y : 600 mm Course axe Z : 560 mm Dimensions de la table : 950 x 650 mm Charge maximale sur la table : 1 000 kg Vitesse de rotation : 18 000 t/min Nombre d’axes : 3 Changeur d’outils : 30 emplacements Porte-outil : HSK63 DÉTAILS DE LA MACHINE Commande : Heidenhain iTNC530 Dimensions & Poids Dimensions (L x l x H) : 3 500 x 3 000 x 3 200 mm Dimensions de transport (L x l x H) : 3 500 x 3 000 x 3 200 mm Poids : 10,2 t Heures de fonctionnement Heures broche : 38 534 h Heures machine : 98 381 h Remarque : La force de serrage de la machine a été mesurée par DMG, et elle est si faible qu'il existe un risque de chute de l’outil. La machine présente un défaut de broche. Diverses fuites sont constatées, par exemple au niveau du convoyeur à copeaux ou de la zone des portes.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2003, obratovalne ure: 30.434 h, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 1114 000402 3, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, model krmilnika: Heidenhain iTNC530, največja hitrost vrtenja: 10.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Pomik X-os: 1.060 mm Pomik Y-os: 710 mm Pomik Z-os: 710 mm Delovna velikost: Ø800 NC. vrtljiva miza Hitrost vrtenja: 10.000 vrt/min Število osi: 5 Menjalnik orodij: 30 mest Orodna glava: HSK63 Gsdpjy Ib A Njfx Anfsbl PODROBNOSTI O STROJU Krmiljenje: iTNC530 Dimenzije & teža Dimenzije stroja (D x Š x V): 4.080 x 4.490 x 3.117,5 mm Transportne dimenzije (D x Š x V): 3.500 x 2.500 x 2.410 mm Teža: 9,7 t Obratovalne ure Vreteno ure: 30.434 h Obratovalne ure: 66.001 h Opomba: Pri stroju se takoj zviša temperatura in v preteklosti je že kadilo. Stroj ima poškodovano vreteno. Več izolacij kablov je obrabljenih.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen,

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W42365L00150, Leto izdelave: 2022, obratovalne ure: 1.792 h, nosilnost: 2.500 kg, lastna masa: 690 kg, skupna višina: 1.300 mm, skupna dolžina: 3.500 mm, skupna širina: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 2,500 kg MACHINE DETAILS Charger: E24/55 HFX Operating hours: 1,792 h Dimensions & Weight Dimensions (L x W x H): 3,500 x 800 x 1,300 mm Unladen weight: 690 kg EQUIPMENT Charger PIN code unlocking The following technical data are taken from the manufacturer's specification sheet. The seller cannot guarantee their accuracy. Load centre: 600 mm Distance from load wheel axle to load bearing surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogie: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Gsdpfx Aney H Dk Hefjbl Dimensions Lift: 125 mm Tiller height in driving position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load bearing surface: 1,170 mm Outside fork arm width: 520 / 540 / 560 / 680 mm Ground clearance centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Working aisle width with 800 x 1,200 mm pallet transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with load / without load: 10 / 12 km/h External reference: W42365L00150

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W42365L00151, Leto izdelave: 2022, obratovalne ure: 1.666 h, nosilnost: 2.500 kg, lastna masa: 605 kg, skupna višina: 1.700 mm, skupna dolžina: 2.300 mm, skupna širina: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Battery charger: HFX 1600/3200 Operating hours: 1,666 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,700 mm Unladen weight: 605 kg EQUIPMENT Battery charger PIN code unlocking The following technical data are based on the manufacturer's data sheet. The seller assumes no liability for their accuracy. Load center: 600 mm Distance from wheel axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogies: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift height: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork arm dimensions: 55 / 165 / 1,150 mm Outer fork arm distance: 520 / 540 / 560 / 680 mm Gedpsy H Dcijfx Anfebl Ground clearance (middle of wheelbase): 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet (across forks): 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance data Travel speed with load / without load: 10 / 12 km/h External reference: W42365L00151

Leto izdelave: 2004, stanje: rabljeno, Tank & Environmental Protection Wozniack Dear Sir or Madam, We are offering a 25,000 Liter Double-Walled Storage Tank, Diesel Tank ===== Nominal capacity: 25 cbm Quantity: 1 Used: but completely overhauled, meaning the tank is cleaned, sandblasted, primed, and painted Color finish: Paint RAL; however, you may always specify your preferred color. Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate 1 piece: Dipstick 1 piece: Vent nozzle 1 piece: Filling nozzle 1 piece: New overfill prevention device 1 piece: New leak detector with filled leak detection liquid 1 piece: Ladder 1 piece: Suction line Design: Cylindrical horizontal tank with feet/consoles Godpfx Anoc Nkr Nsfebl Tank dimensions: Length approx. 8,390 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Storage: Above-ground installation Compact diesel dispenser Piusi 70 L/min. Pump 230 Volt, max 55 L/min. Optional 70 L/min available on request. Naturally, you can customise your tank system as desired! Your preferences regarding color and equipment will gladly be accommodated wherever possible. All our systems are thoroughly inspected and quality-checked by select personnel at our facility. Economical delivery can be provided on request. Viewing of our systems is possible at any time. We also have a range of above-ground and underground tanks in all sizes available for sale on our premises. We also purchase existing tank systems at any time. Trade-ins of used tanks are possible. With kind regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W42364L00583, Leto izdelave: 2022, obratovalne ure: 2.593 h, nosilnost: 2.000 kg, lastna masa: 595 kg, skupna višina: 1.300 mm, skupna dolžina: 2.300 mm, skupna širina: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 2,000 kg MACHINE DETAILS Gbedpfxsy H Dbro Anfel Charger: E 24/55 HFX Operating hours: 2,596 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,300 mm Unladen weight: 595 kg EQUIPMENT Charger Key The following specifications are taken from the manufacturer’s data sheet. The seller cannot guarantee the accuracy of these specifications. Load center: 600 mm Distance from load wheel axle to fork face: 975 mm Wheelbase: 1,478 mm WHEELS Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, tandem: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side (tandem): 1X + 2 / 4 Track width, drive side: 502 mm Track width, load side: 380 mm DIMENSIONS Lift: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to fork face: 1,170 mm Fork arm dimensions: 55 / 165 / 1,150 mm Overall fork widths: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet crosswise: 2,790 mm Turning radius, initial lift raised/lowered: min. 2,095 / 2,165 mm PERFORMANCE DATA Travel speed with / without load: 10 / 12 km/h External reference: W42364L00583

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 21.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 190332, vpenjalna sila: 1.000 kN, injekcijska masa: 15 g, izmetalna sila: 66.000 N, hod izmetalca: 225 mm, dolžina plošče: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL SPECIFICATIONS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platen size: 795 x 795 mm Mold installation height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection unit 3 (60 series) Screw diameter: 15 mm (high wear-resistant) Injection volume: 17 cm³ Shot weight: 15 g Gedpfsy Hki Aox Anfsbl Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h EQUIPMENT - 1 vertical injection unit mounted on carriers for the 2nd injection unit (instead of on tie bars), manually operated, working position adjustable between 70 and 250 mm - 2 x core pullers - Open nozzle 15 mm, wear-resistant, without heating band (1st IU 150) - Technology Level 2 – servo-controlled hydraulic system with two regulated pumps - Technology Level 3 hydraulic system with three regulated pumps for simultaneous movements - Heating band for open nozzle - 150 injection unit for vertical injection into the mold separation during 2K processing - Position-regulated screw with control valve at the injection unit, incl. regulated back pressure - Position-regulated screw with control valve for multi-component machines – for injection unit 2 - 60 injection unit for horizontal injection into the mold separation as the 3rd injection unit - For VE 906/00, 60 injection unit in L-position: unit lowered by 70 mm - Plasticizing cylinder set 15 mm (without nozzle), with pre-positioned feed and pressure relief valve - Open nozzle 15 mm, wear-resistant, without heating band (L-position) - Nozzle tip with radius 15 (L-position) - Heating band for open nozzle (L-position) - Position-regulated screw for the third injection unit - Documentation / Manual

Stanje: rabljeno, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110°C 60 m³/hour 20.2 m head n = 2900 rpm This offer is directed exclusively at commercial customers within the meaning of §14 BGB. Gbjdouif Iuopfx Anfel No sale to private individuals.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 32.790 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.032 mm, pomik osi Y: 750 mm, pomik po osi Z: 750 mm, obremenitev mize: 3.000 kg, največja hitrost vretena: 6.000 obr/min, TEHNIČNE PODROBNOSTI Gbedoy Hkhrspfx Anfjl Pomik X-osi: 2.032 mm Pomik Y-osi: 750 mm Pomik Z-osi: 750 mm Maks. višina obdelovanca: 870 mm Maks. obremenitev mize/obdelovanca: 3.000 kg Širina mize: 800 mm Dolžina mize: 2.240 mm Hitrost vretena: 40 - 6.000 min⁻¹ Priklop vretena: SK 50 Standardna moč vretena: 18,5 kW Standardni navor: 759 Nm Močnejša izvedba vretena: 26 kW Močnejša izvedba navor: 1.067 Nm PODROBNOSTI STROJA Krmiljenje: MAZATROL Dimenzije & Teža Dimenzije (D x Š x V): 5.685 mm x 4.096 mm Teža: 14.000 kg Obratovalne ure: 32.790 h OPREMA Merilna sonda (proizvajalec: Renishaw) Voziček za odrezke 47 SK50 držal, od tega ca. 25 Weldon držal Naprava za čiščenje emulzije