Oblikovalna škatla, oblikovalni okvir

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, nosilnost: 200 kg, doseg roke: 2.400 mm, natančnost ponavljanja: 0,06 mm, lastna masa: 1.155 kg, število osi: 6, Dražba paketa 4 robotov KUKA KR 200! Stroj je bil popolnoma obnovljen (čiščenje, menjava olja, mehansko vzdrževanje, ponovitveni in obremenitveni testi)! TEHNIČNI PODATKI Nosilnost: 200 kg Doseg roke: 2.400 mm Število krmiljenih osi: 6 Delovni volumen: 38,6 m³ Ponavljivost pozicioniranja (ISO 9283): ± 0,06 mm Območje gibanja A1: ±185° A2: -142° / 0° A3: -120° / 148° A4: ±350° Klodpfsx Syktox Af Nsl A5: ±120° A6: ±350° Hitrosti osi (nazorna obremenitev) A1: 90 °/s A2: 85 °/s A3: 85 °/s A4: 117 °/s A5: 120 °/s A6: 195 °/s PODROBNOSTI O STROJU Model krmilnika: KRC2 Teža na robota: 1.155 kg Raven hrupa: < 75 dB Nagib: ± 5° Obratovalna temperatura: 10 °C do 55 °C Temperatura skladiščenja/transporta: -40 °C do 60 °C OPREMA Manipulator Krmilna omara KRC2 Teachpendant Kompleti kablov

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), Rafamet UBB 112/2 Minimalni premer tekalne površine kolesa: 700 mm Maksimalni premer tekalne površine kolesa: 1120 mm Dolžina vpenjanja: 540 – 1050 mm Minimalna dolžina osi kolesnega para: 1640 mm Maksimalna dolžina osi kolesnega para: 2800 mm Maksimalna širina pnevmatike: 150 mm Maksimalna teža kolesnega para: 4000 kg Kljdpfx Afohvml Ij Nol Hitrost pomika sani nastavitve: 2000 mm/min Maksimalni pomik sani: 2000 mm/min Moč glavnega pogonskega motorja: 80 kW Teža cca: 40000 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7600-101325, nosilnost: 340 kg, doseg roke: 2.800 mm, vrtilni razpon: 360 °, trajanje garancije: 4 meseci, Oprema: dokumentacija / priročnik, Robot with 4 months warranty Complete overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Replacement of oils for all six axes. - Battery replacement: All internal batteries were replaced with new ones. - Mechanical maintenance: Gears and counterweight were inspected and serviced based on repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, programming pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in its original color or a custom color of your choice. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Controller: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 rotations Dynamics (max. rotational speed per axis) Axis 1: 75 °/s Axis 2: 60 °/s Axis 3: 60 °/s Axis 4: 100 °/s Axis 5: 100 °/s Axis 6: 160 °/s Positioning and path precision Positioning accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization time (Pst at ±0.4 mm): 0.18 s Path accuracy (AT): 2.05 mm Path repeatability (RT): 0.23 mm Kledpfx Aex Syivjf Nsl FEATURES - 6-axis industrial robot with high payload capacity - Large swivel range on axis 6 with up to 67 rotations - Precise path control with less than 0.3 mm repeatability - High wrist axis speeds for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, nosilnost: 360 kg, doseg roke: 2.826 mm, model krmilnika: KRC4, natančnost ponavljanja: 0,08 mm, število osi: 6, Stroj je bil popolnoma obnovljen (čiščenje, menjava olja, mehansko vzdrževanje, ponovljivostni in obremenitveni testi)! TEHNIČNI PODATKI Nosilnost: 360 kg Doseg roke: 2.826 mm Ponovljivost položaja (ISO 9283): ±0,08 mm Kledpfx Afsx Syg Io Nsl Število osi: 6 Dodatna nosilnost max. Vrtljivi steber: 550 kg Povezovalna roka: 130 kg Roka: 150 kg Območja gibanja A1: ±185° A2: −130° / +5° A3: −110° / +162° A4: ±350° A5: ±120° A6: ±350° Hitrosti osi (nazivna obremenitev) A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s PODROBNOSTI O STROJU Model krmiljenja: KRC4 Dimenzije & teža Tloris: 968 × 944 mm Teža robota: cca 1.660 kg OPREMA Manipulator Krmilna omara KRC4 Kompletna kabelska napeljava Ročna upravljalna enota

Stanje: zelo dobro (rabljeno), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive graphical user interface (GUI) operating on Microsoft Windows XP Professional. Instrument configuration includes the following features: - Magnification range: 5x - 300,000x - Accelerating voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, including: - Graphical navigation on the specimen holder - Easy sample navigation via click-center-zoom - Field-of-view controlled navigation using two navigators Kedpfx Asmn Rcqjf Nsll - Relative coordinate navigation - Save and recall sample positions - Adjustable specimen stage field-of-view process - Field-of-view correction during rotation via computer-controlled eccentric rotation - Field-of-view correction during tilting via computer-controlled eccentric tilt - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking when moving the sample in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel range: - x = 125 mm - y = 100 mm - z = 5 to 80 mm (stepless) - T = -10°C to +90°C - R = 360° (continuous) - Secondary electron detector for high vacuum operation - Innovative superconical objective lens to ensure highest image resolution even at high tilt angles - Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live image display from multiple detectors - Easy sample navigation via click-center-zoom - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile sample chamber with various expansion options: free flanges (e.g., for EDX, WDX, EBSD, cathodoluminescence, etc.) - Maintenance- and wear-free, quiet pumping system consisting of forepump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive fault protection to prevent operator error and external media failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool kit, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump instead of standard diffusion pump - When using a turbomolecular pump, no cooling water is required for SEM operation. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software license will be transferred to the new owner upon purchase! - Nitrogen-free, energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standards-free element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and instruction - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (See photos) Condition: used (Subject to change and errors in the technical data and specifications!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 34.797 h, številka stroja/vozila: 2011-0250, Premer cevi (maks.): 600 mm, Dolžina cevi (maks.): 1.500 mm, Kot upogiba (maks.): 180 °, radij upogibanja (maks.): 200 mm, debelina stene: 3 mm, Original machine year of manufacture: 1996. Completely overhauled by the manufacturer in 2011 at a cost of approx. €250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion parameters Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Rotation angle: max. 360° Rotational speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic tank volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operator and control console EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic drive for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (2-way) - Schwarze-Robitec operator console - Rittal control cabinet cooling unit type SK 3361100 Note: Due to lack of operator knowledge, the machine could only be tested in setup mode. No faults are known. Ksdpfox Srkljx Af Nell The machine is currently dismantled.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 9.874 h, upogibna sila (maks.): 173 t, delovna širina: 4.250 mm, hod: 600 mm, globina grla: 420 mm, TEHNIČNI PODATKI Prešna sila: 1.700 kN Delovna širina: 4.250 mm Hod: 600 mm PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 6.000 x 1.700 x 3.000 mm Kledpfx Asx R S S Hef Nsl Skupna teža: 16.000 kg Vrsta upravljanja: CNC-voden Obratovalni čas prečnega nosilca: 9.874 h OPREMA 5-osni zadnji prislon Hidravlična pritrditev orodja (zgoraj/spodaj) Nastavitev matric za pregibanje CNC-vodena upogibna podpora Varnostna naprava Bendguard Senzor za merjenje kota ACB Opomba: Stroj se prodaja brez orodij.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 193 34-41, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.600 mm, obremenitev mize: 2.500 kg, premer vretena: 102 mm, hitrost vretena (min.): 4 obr/min, največja hitrost vretena: 1.600 obr/min, skupna višina: 3.500 mm, skupna dolžina: 6.500 mm, skupna širina: 4.700 mm, dolžina mize: 1.400 mm, širina mize: 1.250 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj bol v roku 2025 repasovaný a modernizovaný, je okamžite pripravený na použitie! Pojazdy: - Priečny pojazd stola (os X): 1600 mm - Pohyb vretenovej hlavy (os Y): 1250 mm - Pozdĺžny pojazd stola (os Z): 1475 mm (obmedzenie v dôsledku veľkého stola) - Pohyb vretena (os W): 710 mm - Otoč stola (os B): 360 stupňov Upínací stôl: - Upínacia plocha: 1250 x 1400 mm - Zaťaženie stola: 2,5 t Vŕtacie vreteno: - Priemer: 102 mm - Upínanie nástroja: DIN2080 50 SK - Plynulá regulácia otáčok: 4 - 1600 ot/min - Výkon pohonu: 13 kW Posuvy: - Osi X, Y, Z, plynule: 1 - 4000 mm/min Rýchloposuv: Kjdpjw Rn R Rofx Af Nell - Osi X, Y, Z: 4 m/min Pripojovací výkon: 42 kW Hmotnosť: 10 t Potrebný priestor (D x Š x V): 6,5 x 4,7 x 3,5 m Vybavenie: - Heidenhain TNC 320 - Zariadenie na chladenie

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000030194, dolžina mize: 4.500 mm, širina mize: 3.000 mm, TEHNIČNE PODROBNOSTI Dimenzije mize: 3000 x 4500 mm PODROBNOSTI STROJA Napajalna napetost: 400 VAC Nazivni tok pri polni obremenitvi: 5,04 A Število napajalnih faz: 3 Moč: 2,7 kW Kjdpfxox Trm As Af Nsll Frekvenca: 50 Hz

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13688, Leto izdelave: 2012, lastna masa: 4.990 kg, Popolnoma avtomatizirana, horizontalna proizvodna linija za IGU (izolacijske steklene enote) in distančne okvirje! Proizvodna zmogljivost 1200 kosov na izmeno! TEHNIČNI PODATKI Proizvodna zmogljivost: 150 kosov/uro PODROBNOSTI STROJA Električni podatki: Napetost: 480 VAC Frekvenca: 50/60 Hz Faze: 3 Največja kapaciteta motorja: 2 A Klodpfxox Trlre Af Nsl Kratkostični tok: 5.000 A Moč: 142 kVA Teža stroja: 4.990 kg OPREMA Stroj GED Intercept Ultra/tanka okvirna i-3 - CE izvedba Sistem za proizvodnjo distančnikov z "toplim robom" Proizvodnja Intercept ULTRA nerjaveče jeklo, ThinPlate ali BlackLine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Kodpew Rl S Sefx Af Noll Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.720 kg, obratovalna hitrost: 10.700 mm/s, širina valja: 2.200 mm, TEHNIČNE PODROBNOSTI Tog material Klodpfx Afjx Trdnj Nsl Višina obdelovanca: maks. 50,8 mm Teža obdelovanca: maks. 34 kg/m² Material v rolah Širina: min. 900 mm – maks. 2.200 mm Teža: maks. 50 kg Premer: maks. 240 mm Največja hitrost tiskanja: 64,2 m²/h (v ekspresnem načinu) PODROBNOSTI O STROJU Mere in teža Mere: 3.080 × 2.500 mm Teža: 1.720 kg Opomba: Glave stroja je treba zamenjati. Prodajalec lahko ponudi celoten servis.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, model krmilnika: DC241 EEC, višina obdelovanca (maks.): 3 mm, zasukni kot osi A (maks.): 105 °, kot vrtenja osi B (max.): 180 °, As-new Hexagon Global S Blue Coordinate Measuring Machine! TECHNICAL DETAILS Klsdpjx Sx Nuefx Af Nol Probe Head Interface (CMM): TKJ Probe Head Weight: 350 g Total Weight: 480 g Measuring Performance Measuring Force: 5 µm Measuring Range: 2 mm Maximum Measuring Distance: 14 mm Z-Axis Resolution: 66 nm Lateral Resolution: 6 µm Angular Acceptance: ±30 ° Maximum Measurable Thickness: 3 mm Spot Diameter: 12 µm LED Area Light Illumination Area: 780 × 780 mm Overall Dimensions: approx. 860 × 840 × 20 mm Weight: approx. 19 kg Load Capacity: max. 50 kg Stylus Shank Diameter: 3 mm Shank Length: 50 mm Ruby Ball Diameter: 5 mm Thread: M3 Angular Rotation Steps: 2.5 ° A-Axis: ±105 ° B-Axis: ±180 ° Rotation Speed: 90 ° in 2.5 s Max Extension Length: 450 mm Recommended Drive Torque: max. 1.4 Nm Positioning Repeatability: 0.5 µm at 100 mm distance from A-axis rotation center MACHINE DETAILS Control System: DC241 EEC Controller Compatibility: HH-C-V2.0, HH-CA-V2.0 with HR-R automatic probe changer rack Electrical Data Supply Voltage: DC 5 V to 6 V Normal Current Consumption: 50 mA Minimum Current Consumption: 30 mA Maximum Current Consumption: 150 mA (pulsed) Protection Class: IP40 (IEC 60529) Temperature Range: 16 °C to 26 °C EQUIPMENT WIN 10 operating system Interactive 3D graphics functionality Computer-simulated CMM environment Bidirectional connection to CAD systems IGES, VDA, DXF, and STEP Processing of 2D, 3D, wireframe and surface models Scanning of curves (CurveAnalyzer) and surfaces Includes PC-DMIS-SHEETMETAL Functions for measuring thin-walled components Automatic white light probe – TKJ 2.5 HP-OW-2.14 sensor kit, incl. controller, incl. reference sphere, Ø 30 mm, ceramic matte HP-SX1H scanning sensor LED area light for mounting on the CMM Reference price mechanical frame for supporting the area light HP-CTS5.10 optical sensor HP-S-X1C/H stylus holder (1× M3) HH-C-V2.1 controller HR-OW-2.14 short end cap HR-R3 sensor acceleration HH-CA-V2.0 interface Active probe rack, HR-RA-65 HR-X1-3P stylus rack Reference sphere, Ø 60 mm, ceramic, with stand M3 stylus (R-5-SS-3.50) Stylus rack Computer & Software PC-DMIS CAD++ PC-DMIS operator interface in conjunction with system assignment PC-DMIS CWS interface PC-DMIS probe changer support software PC-DMIS Vision for tactile sensors Touchscreen including computer system Table for computer system

Stanje: dober (rabljeno), Leto izdelave: 2001, Dear Sir or Madam, Kljdpsw Axahefx Af Nol We hereby offer you a used 5-axis CNC machining centre "DECKEL MAHO" DMU 50 eVo, in good condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 19.857 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.400 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 180 mm, število mest v zalogovniku orodij: 72, TEHNIČNE PODROBNOSTI Pomik osi X: 4.400 mm Klodpfx Aox Sri Isf Nsl Pomik osi Y: 1.300 mm Pomik osi Z: 180 mm Moč rezkalne enote: 15 HP Menjava orodij: samodejna Število orodnih mest: 3 x 24 rež OPREMA Delovna miza s prečko Pomožna enota za težke dele Pnevmatske vpenjalke za proizvodnjo vrat in oken Vakuumska črpalka 250 m3/h samodejno mazanje Transporter za odpadke