Kmetijski stroj

ICEBEAR 5000WFSE ca. 5m³

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres Fodjrgzv Nopfx Acpegg * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, Leto izdelave: 1978, obratovalne ure: 9.125 h, 1978 | Hanomag MF 33C Massey Ferguson / samo za delove | Polovni utovarivač na točkovima | 9125 radnih sati 📍Lokacija: Nemačka 🚛 Dostava dostupna do vaše destinacije – koristite naš kalkulator isporuke da procenite troškove transporta! 💰 Kupi odmah za 4.900 EUR ili pošaljite ponudu. Plaćanje pri isporuci dostupno uz malu naknadu (podložno odobrenju)* 👷‍♂️ Pregledao nezavisni stručnjak 5 tačaka inspekcije, 5 odobreno ✅ 0 neispravnosti ℹ️ 0 nedostataka ⚠️ 📌 Komentar inspektora: Samo za rezervne delove, nije kompletan. 📄 Želite da vidite kompletnu inspekciju, dodatne fotografije ili video? Savet: Referenca „40580 Equippo” se često koristi pri pretrazi više detalja na internetu. Fgedpfx Aey Iy N Ujcpjg 💡 Zašto se ova mašina i naša usluga izdvajaju: ✔ Temeljna inspekcija od strane profesionalaca ✔ Dostava na gradilište dostupna ✔ Garancija povraćaja novca ✔ Sigurne i fleksibilne mogućnosti plaćanja 🔄 Razmatrate druge opcije opreme? Nudimo korisne alate i resurse za sve vlasnike i operatere opreme – lako dostupne na našoj platformi.

Stanje: novo, Leto izdelave: 2024, SCHORR Ride-on Sweeper Electric Sweeping Machine Street Sweeper Floor Cleaner High-performance, low-noise sweeper for indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for cleaning floors. The ergonomic seat and intuitive controls allow for effortless operation, even over extended periods. The powerful motor ensures thorough cleaning, even under demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a hassle-free and pleasant task. Standard LED work lights facilitate work in dimly lit areas. With an output of 1920 watts from 48V, the sweeper delivers ample power for over 4 hours of continuous operation. SCHORR Ride-on Sweeper RR80KM – Discover the Advantages: Fgjdpfx Aeuac D Uocpeg -- Fully electric ride-on sweeper with a 1,250 mm working width – ideal for large indoor and outdoor areas -- 48V/1920W performance -- 80-liter bagless rear collection container, easy to withdraw and empty -- Powerful 48V, 58Ah system -- With optional spray nozzle to reduce dust dispersion -- Extremely simple operation -- Outstanding maneuverability Technical Data Manufacturer (short name): SCHORR Manufacturer model code: RR80KM Drive: Ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tyres: PU (non-slip) Net weight: 400kg Basic Dimensions Collection container capacity: 80l Freshwater tank capacity: 10l Main brush diameter: 500mm Overall length: 1,600mm Overall height: 1,300mm Overall width: 1,250mm Sweeper width (without brushes): approx. 80cm *Further technical specifications are available upon request. The chassis is made entirely of flexible, robust plastic, minimizing potential damage to walls and similar surfaces. Other than the side brushes, nothing protrudes beyond the bodywork, allowing you to clean as close as possible to objects. The collection container is made of solid steel and can be easily removed from the rear of the machine. Sensitive components such as the front work lights are protected by a metal bumper. All in all, the machine is perfectly equipped for most applications. We usually keep all spare parts in stock and can deliver them quickly if you ever encounter a problem. Should you require technical support, we have the necessary technical expertise and can carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Just contact us and we will advise you on the various options. We look forward to your inquiry! If you have any questions about our ride-on sweeper, the SCHORR team will be happy to assist you. Our knowledgeable staff is available by phone or email. We look forward to hearing from you and assisting with your inquiry.

Stanje: zelo dobro (rabljeno), For sale: DDR motor pump. Fgjdpfx Ajv Nrf Ejcpjg - 800 l/min - 28 HP - In very good condition.

Stanje: rabljeno, Leto izdelave: 2006, Technical details: x-axis travel: 1000 / 600 mm y-axis travel: 570 mm z-axis travel: 570 mm Control unit: Fagor 8055 MC Tool magazine with 24 stations Tool holder: SK 40 Spindle speed: 10,000 rpm Spindle taper: SK40 Infinitely variable feed rates X/Y/Z: 10 m/min Rapid traverse X/Y/Z: 24 m/min Operating hours / power-on hours: not available Table size: 1200 x 500 mm Table load capacity: 800 kg Distance spindle nose to table: min./max. 100/670 mm Interface: 232 Total power requirement: 15 kW Fgedpju Idfrjfx Acpeg Machine weight approx.: 5.0 t Machine dimensions (LxWxH) approx.: 3.3 x 2.3 x 2.8 m Equipment: - Cooling unit with spindle feed (no ICS) - Control panel with hand-held controller - Chip conveyor - Electrical cabinet with cooling, Rittal SK 3305500 in good condition.

Stanje: rabljeno, prevoženi kilometri: 2.659 km, moč: 188 kW (255,61 KM), prva registracija: 08/1983, skupna masa: 7.899 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x4, velikost pnevmatike: 14.5r20, obratovalne ure: 1.488 h, številka stroja/vozila: 573, Oprema: garancija za rabljena vozila, hidravlika, kompresor, pogon na vsa štiri kolesa, zapora diferenciala, TÜV can be arranged upon request. The Intrac vehicles are in good condition, coming directly from the authorities (Swiss Army). They have been superbly maintained and have a full service history (see photo). The bodywork is in good condition. The Intrac 2011 is equipped with: 4 steering modes, all-wheel drive, differential locks, 1 standard seat plus auxiliary seat, highly off-road capable for extremely heavy-duty winter service. The snow blower can also be angled. Tire size 14.5R20, fully hydraulic drive with fast and creeper gear, total weight 7,900 kg, displacement 12,756 cm³, 24-volt power supply. Fjdpfxjqx Sz De Acpegg We also have several defective Intrac 2011 units, both with wheel and chain drive, still in stock at a price of €8,000 each (net). All my vehicles can be viewed on my website. – There’s no need to travel all the way from Flensburg to Berchtesgaden to check out different vehicles when you’ll find over 150 models right here, including: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc. – and many with TÜV as well. In addition, there is an incredible range of spare parts and accessories available. Why settle for less? – Give me a call. Best regards, Philipp.

Stanje: skoraj kot novo (rabljeno), Talna obloga / Podestna obloga / Iverne plošče – NOVO Kot novo, glejte slike. Iverna plošča, tip: A SF TYP P6 38 mm v skladu z DIN EN312 zgornja stran neobdelana, spodnja stran pobeljena, po potrebi z utori, rezanje v skladu z DIN EN324 Cena po dogovoru: od 32,00 EUR neto/m², dobava iz skladišča Na voljo so naslednje količine in mere: + 200 kos, dolžina 2.295 mm x širina 1000 mm + 60 kos, dolžina 2.460 mm x širina 1000 mm + 70 kos, dolžina 2.520 mm x širina 1000 mm + 60 kos, dolžina 2.580 mm x širina 1000 mm + 80 kos, dolžina 3.410 mm x širina 1000 mm Pozor: prodajajo se samo celotne plošče, rezanje ni mogoče! Izdelek je na zalogi. Transport je možen po dogovoru. Ogled je možen kadarkoli po predhodnem dogovoru. Dodatne informacije na zahtevo. Stalno več kot 5.000 tekočih metrov regalov za palete Fsdpfx Asd E Izzecpsgg različnih proizvajalcev na zalogi. (Pridržana sprememba tehničnih podatkov, specifikacij in cen ter možnost preprodaje! Glejte naše splošne pogoje, vse cene so brez DDV, dobava iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in regali za težke obremenitve – rabljeni in novi Opis: Iščete kakovostne skladiščne regale za nakup? Lenox Trading je, z okoli 100 lastnimi zaposlenimi, eden največjih trgovcev z novo in rabljeno skladiščno tehniko po celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ HITRO DOVOLJIVO: • Več kot 10.000 tekočih metrov regalov je takoj na voljo • 20.000 m² skladiščnih podestov in jeklenih nadgradenj je takoj na voljo • Tedensko 30–50 vlačilcev za maksimalno izbiro 📦 NAŠA PONUDBA (UGODNO KUPITE SPLETU): Ne glede na to, ali kupujete regale za palete, regale za težke obremenitve, visoke regale, regale za police, regale za pnevmatike ali regale za IBC-posode – dostavljamo in montiramo po vsej Evropi s svojo LASTNO ekipo! Vključno s CAD-načrtovanjem, transportom, demontažo in montažo. 🏭 VRHUNSKE ZNAMKE – RABLJENE IN IZ LIKVIDACIJE/KONKURSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠE DRUGO POSLOVANJE: SPLETNE AUKCIJE IN LIKVIDACIJA Pri demontaži in izpraznitvah ponujamo resnično celovito rešitev: 1. Enakodostopni nakup: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno z temeljitim čiščenjem. 2. Aukcija na podlagi provizije: izvajanje dražb po naročilu. Naša celovita storitev z lastnimi zaposlenimi: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in temeljito čiščenje. Ne glede na to, ali ste na nas naleteli zaradi reglov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za ponudbo brez obveznosti!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Certificirano po DGUV do: 08/2027, Pekarski hladilnik Liebherr BKPv 6570 Izvedba iz nerjavečega jekla Za pladnje 600 x 400 mm Digitalni prikaz temperature Nastavljiv temperaturni razpon od -5 do 15°C Samo pri nas: preverjeno po DGUV V3 Priklop 230V Rabljena naprava Fgjdoyhzlmjpfx Acpog Obiščite naš velik razstavni salon!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 64,72 kW (87,99 KM), vrsta goriva: dizel, barva: rumena, stanje pogona: 90 odstotek, število sedežev: 1, Leto izdelave: 1998, številka stroja/vozila: 3YS00993, Oprema: hidravlika, kabina, Opis izdelka Rabljeni mini bager Proizvajalec: Caterpillar Fedpfoum D R Dsx Acpogg Model: 308BSR bager Pogon: dizelski motor Stroj se prodaja v izključno obstoječem stanju Za več informacij se obrnite na: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478

Stanje: rabljeno, številka stroja/vozila: 15355, Leto izdelave: 2008, obratovalne ure: 15.561 h, nosilnost: 12.000 kg, dvižna višina: 5.500 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 4.280 mm, Oprema: kabina, Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lift height: 5,500 mm Read operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Dimensions (LxWxH): 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd control valve * 4th control valve * Full cabin * Heater * Front working lights * Rear working lights ---- Fedjtw Dfwopfx Acpegg Additional equipment information: Without fork carriage Rotating beacon Radio Single-pedal control ---- Please note that the operating hours stated are always the hours shown on the meter. We are happy to offer you a suitable transport solution. A further 250 - 300 forklifts, attachments, and sweepers available immediately. Rental possible! We are also interested in purchasing your USED equipment. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Interim sale and errors for this offer explicitly reserved. In dealer-to-dealer business, the device is sold as-is, not refurbished. All information without guarantee. Subject to error and change.