Hidravlične giljotinske škarje

LVD MVC 3100 x 20 mm

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: Bsdpshzbipsfx Afqolr - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, zračni tlak: 5,9 letvica, Plazemski sistem nove generacije, ki bistveno poenostavi delovanje sistema za rezanje in žlebljenje do 32 mm. Samodejna nastavitev procesa z naprednim RFID podprtim gorilnikom SmartSYNCT in revolucionarnim enodelnim potrošnim delom, ki zagotavlja sledljive podatke o uporabi. Tehnični podatki: Zmogljivost rezanja: priporočena kapaciteta rezanja: 32 mm - 500 mm/min maks. kapaciteta rezanja: 38 mm - 250 mm/min kapaciteta ločilnega reza: 50 mm - 125 mm/min Bljdpfxow U Stqs Afqjr prebijanje lukenj: 22 mm Tipično žlebljenje: Stopnja odstranjevanja kovine: 8,6 kg na uro Profil žleba: 6,6 mm globina x 6,0 mm širina Obseg dobave: napajalni kabel, ročno gorilnik H105 23 m 75° priključni kabel s sponko, navodila za uporabo Opcija: Hypertherm čitalnik za potrošni del, programska oprema

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. Blodpfx Afot Hw Shsqor 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, Briquetting press with PLC and automatic briquette length control Throughput: up to a maximum of 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Bsdpfx Afov Rpxleqjlr Feed material should ideally be shorter than 25 mm in chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. For example, up to 2 hours of briquetting followed by a 1-hour break, and so on. If the machine is to operate continuously for more than 2 hours at a time, an optional cooling system must be connected.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, najv. debelina jeklene pločevine: 25 mm, moč: 6 kW (8,16 KM), Delovno območje 3000x1500. Sistem Loadmaster vključen. Zaradi daljše neuporabe je potreben servis. Bedpfxjwh R R Ne Afqjlr

Stanje: rabljeno, Leto izdelave: 1992, skupna dolžina: 2.200 mm, skupna širina: 1.000 mm, skupna višina: 2.000 mm, Pohotovostní hmotnost: 3 000 kg Cena: na vyžádání Kombinované profilové nůžky děrovací a stříhací Model: Hydraulický Výrobce: GEKA Typ: Hydracrop 70/SD Kapacita: 70 tun Kapacita střihu kruh: 45 mm Kapacita střihu profil: 45 mm Kapacita střihu plechů: 450 x 15 mm Bjdpfx Aownhi Nsfqjlr Vystřihování: 250 x 6 mm Včetně několika děrovaček Rozměry stroje: 2200 x 1000 x 2000 mm Hmotnost stroje: 3 000 kg - Rok výroby: 1992 - Dokumentace k dispozici: Ne - CE certifikát k dispozici: Ne - Transportní rozměry: 2200 mm x 1000 mm x 2000 mm (d x š x v) - Transportní hmotnost [kg]: 3 000 kg Finanční informace DPH: Uvedená cena je bez DPH DPH / zjednodušený daňový režim: DPH je odpočitatelná pro podnikatele Doprava a výkup kdykoliv možné pro vše z průmyslového sektoru Lukas van Rossum

Stanje: rabljeno, skupna dolžina: 6.400 mm, Teža: 17.500 kg Bsdpfx Afjwnhp Noqolr Cena: Na zahtevo - Dokumentacija na voljo: Da - CE-certifikat: Ne - Serijska številka: 13707 - Upravljanje: Klasično - Znamka krmilnega sistema: Elgo - Moč [kW]: 11,0 - Največja debelina pločevine [mm]: 6 - Največja delovna širina [mm]: 6200 - Izsev [mm]: 60 - Globina omejevalca [mm]: 1000 - Transportna teža [kg]: 17.500 kg Finančne informacije DDV: Navedena cena je brez DDV DDV/Diferencirana obdavčitev: DDV je odbiten za podjetja Dostava in odkup sta možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Sheet width: 3100 mm Sheet thickness: 2.00 mm Sheet thickness for stainless steel: 1.25 mm Strokes max.: 36 strokes/min Cutting angle: 0.9 degrees Table height: 800 mm Table width: 430 mm Upright clearance: 3200 mm Back gauge - adjustable: 5.0 - 750 mm Control: conventional Motor power: 3.0 kW Machine weight: approx. 1950 kg Dimensions (L-W-H): 3730 x 2070 x 1400 mm New price: approx. 45,000 Euro (!!) Special price on request Equipment: - Robust, motor-driven swing-beam guillotine shear - Machine with manual material/back gauge * Travel range: 5.0 – 750 mm back gauge depth Bledpfx Asxcyw Eofqor * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded structure - Compact and clearly arranged machine design - 1x hold-down bar * Hold-down opens before the blade beam raises * No bending of very delicate sheets - Manual cutting gap adjustment - Integrated sheet support system for thin sheet cuts - Sheet/cut-off removal from the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely-movable foot switch - Operating manual (PDF)

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen bistro. Sestavni deli: 1) Pomivalni stroj s prehodom. 2) Pohištvo. 3) Mala in velika kuhinja. 4) Oprema za stranke kot so mize, stoli in samopostrežni pulti. 5) Hladilniki. 6) Cvrtniki in žari. 7) Blagajne in tehtnice. 8) Posoda, krožniki itd. 9) Prezračevalni in filtrirni sistemi. Dokumentacija je na voljo. Ogled na lokaciji je možen. Bledpfexc Nhmex Afqer

Stanje: dober (rabljeno), 782 USED Miwe Ideal Deck Oven with a Baking Surface of 15 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - width: 222 - length: 288 + 52 canopy - height: 270 BAKING CHAMBER DIMENSIONS (in cm): - width: 180 - length: 168 - height: 15 (2 lower retractable decks), 17 (3 upper decks) EQUIPMENT: - used gas or oil burner (new burner available upon request) We offer devices in various technical conditions and at different prices: 1. As removed from the bakery (untested). 2. After inspection with start-up warranty. Bledjtr Exmopfx Afqjr 3. After refurbishment with a 6-12 month warranty. The machine ready for inspection is located at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. The price given is net (VAT excluded). WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.