Cilindrični stroj za brušenje in poliranje

Loeser RP+S 374/2

Stanje: rabljeno, Leto izdelave: 1996, Charge weight 135 liters Outer tank diameter 1220 mm Tank diameter / Tank height 1,220 / 1,035 mm Working basin width 304 mm Motor power 0.75 kW Kdodpfx Ajwcg Ersf Tsg Motor speed: 1500 rpm Operating voltage 400 V Machine weight approx. 600 kg Space requirement approx. 1.38 x 1.28 x 1.04 m Vibratory finishing machine - Factory No.: 15772 / 96-08 - Machine ON time: 44,854 h - with drum heating

Stanje: dober (rabljeno), Bobnasti peskalni stroj Kdodpjlf Hq Nofx Af Tog Delovni volumen: 800 L Max. delovna teža: 2000 kg Max. teža posameznega obdelovanca: 150 kg Premer peskalnega dela: 1350 mm Širina odprtine: 1350 mm Število instaliranih turbin: 2 Moč turbine: 11 kW Max. pretok turbine: Tip čistilca: zračni Montaža stroja: talna Ohišje: Mn Filtrirna naprava: da Širina stroja: mm Višina stroja: mm Dolžina stroja: mm

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. Kjdpfx Ajfz Naksf Tedg The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel.

Stanje: novo, Leto izdelave: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing of small to medium-sized workpieces. The unit features a digital process timer, digital speed display, and a dosing pump (wet version). The plate speed can be adjusted via frequency inverter. The Turbo 60 is available in both dry and wet configurations. It can be seamlessly linked with the ERBA YE-60 separation section as shown in the images. Kdedpsn Ut Iljfx Af Teg Technical specifications: - Gross volume: 60 liters - Drive power: 3.0 kW - Plate speed: 75 to 300 rpm - Optional equipment: tilting motor, sound insulating cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the system including optional accessories, which are available separately and may incur additional charges. If you are interested, we look forward to your inquiry. We will be happy to advise you, without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). Our initial offer is non-binding and will include information on our general terms and conditions, imprint, and right of withdrawal, before any purchase/contract is concluded.

Leto izdelave: 2025, Stanje: novo, comprising: - Trailer - High conveyor with removable hopper - Pomace conveyor belt for pomace discharge - Washing elevator KWEM 2000 - Belt press KEB 500 - 2 x 300 l tank with hanging strainer Ksdpecl Tvgsfx Af Tjdg - Pasteuriser PAS 750 Oil - Bag-in-Box filler KBF 2000 for mobile unit - Accessories such as pumps, compressed air compressor, high-pressure cleaner, ...

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Kdjdpfek Hz Nqex Af Tsg Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Kjdpfxef Nku Ro Af Tsdg Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Potreben prostor pribl. 1,80 x 1,70 x 1,30 m - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) Kodpfxew Hnr Is Af Tjdg - s pnevmatsko ločevalno loputo

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod Kjdpfx Afogpxc Se Todg - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Kdjdpfx Afeuy Ifgo Tjg Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).