Rezalnik z zobnikom in zobnikom

LIEBHERR Modul 4

Stanje: rabljeno, Technical Details: Maximum balancing weight: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 - 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Psdpfeu Upp Tjx Aczopl Machine dimensions approx. LxWxH: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used for measuring and correcting the static and dynamic imbalance of rotors. Maximum balancing body weight 800 kg with equal load distribution, i.e. 400 kg per bearing stand Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Distance between bearing centers min. 125 mm and from shaft end to bearing center max. 2070 mm Measurement speed: 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 mounting pedestals with manual adjustment along the entire bed Schenk measuring device with digital display and various accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts, please inquire for details! i.D.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown Ppedjul Efmepfx Aczol on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Psdergahxepfx Aczepl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Pjdsw T Sd Tspfx Aczopl Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Pjdpoifi D Tefx Aczjpl Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Leto izdelave: 2001, Stanje: rabljeno,

Stanje: dober (rabljeno), max. gear diameter 250 mm with 3" cutter module 5.5 hobbing length 70 mm cutter module 5.5 max. recognized external diameter 300 mm spindle diameter 85 mm table bore diameter 39 mm table external centering diameter 139.75 mm electric tool motor power 4 HP height 1,800 mm length 1,450 mm weight 2,450 kg Pedpfxogq Dgdo Aczspl width 1,000 mm

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Pedpedx D Tvjfx Aczopl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle Ppodpsxmhdnjfx Aczol - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Proizvajalec: LORENZ Tip: S8/630 Premer kolesa: 630 mm Širina kolesa: 180 mm Največji modul: 8 Serijska številka: 12371 Moč (kW): 10 Dimenzije (dך×v mm): 3000 × 2500 × 3500 Teža (kg): 5500 Največji premer obdelovanca (mm): 630 Največji modul: 8 Trenutno stanje: delujoč Ppjdpfxjxakzpo Aczol