Vakuumska črpalka rotacijska vetrnico 100m/h

Leybold Sogevac SV 100

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. Dusdeiiv Ikepfx Afasu • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: generalkompletno obnovljen (rabljeno), Leybold Ruvac WAU1001 Roots Vacuum Pump is, after complete overhaul: - absolutely like new - checked according to manufacturer specifications, ensuring all clearances and dimensions are within tolerances - fitted with new wear parts - available at short notice Dsdpfofq D Hvjx Afaouu - includes one-year warranty

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) Dsdpfx Aoq Sc Ausfasuu - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls Dedpjvu Hgbsfx Afasuu - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Leto izdelave: 2024, You work with large workpieces? Then this CNC laser machine would be the ideal choice. The Wattsan 2030 Flat Bed is a laser cutter designed for processing large materials. No additional setup is required—you can start working immediately! This CNC laser machine features a worktable size of 2000x3000 mm. It is also equipped with a collection tray, making operation much more convenient. The Wattsan 2030 is capable of cutting materials such as fabric, plywood, cardboard, rubber, acrylic, plexiglass, and wood. Contact our managers for more details! Wattsan Features - Working area: 2000x3000 mm - Laser power: 100–130 W Dusdpery Uf Aofx Afasu - Table lowering depth: 40 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 2400 x 3750 x 800 mm - Packaging dimensions: 3860 x 2540 x 1020 mm - Weight: 1075 kg Virmer not only offers premium machinery, but also service and delivery. Our engineers and managers are ready to answer any questions you may have and can provide video support if needed. In addition, owners of Wattsan machines receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We don't only deliver laser engravers, but also metal cutters, welding units, markers, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, continuously developing with the help of its customers. Thanks to user feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, accurate, and powerful—taking your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and equipment with us: CO2 laser machine; laser cutting machine for metal; laser metal cutter; fiber laser for metal; fiber laser engraver; CNC milling machine for metal; woodworking milling machine; CNC milling machine; laser engraving machine; laser engraver; laser cutting machine for plywood; laser engraver; laser metal cutting machine; CNC milling machine; laser marker; lenses; chillers; machine cooling systems; S&A chiller; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machine.

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003 Dujdporb An Ujfx Afaou

Stanje: dober (rabljeno), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, compressor, motor-compressor, cooling machine, cooling aggregate - Manufacturer: Bitzer, compressor motor-compressor - Model: BHS 592 S - Power: 3 kW / 1450 rpm Dsdpfx Aoguzr Hsfaeuu - Displacement: 22.14 m³/h - Max. operating pressure: 24.5 bar - Quantity: 2x cooling aggregates available - Price: per unit - Dimensions: 550/315/H390 mm - Weight: 88 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, 6-station envelope inserting machine with gripper Complete overhaul in 2024 PLC controlled Color touch panel for user guidance Dujdpedygvqsfx Afaou All types of reading systems can be integrated

Stanje: rabljeno, Rotary Vane Vacuum Pump Manufacturer: Leybold Model: Trivac D25 BCS Cat. No.: 11879 Pumping speed: 25 m³/h Ultimate pressure: approx. 0.005 mbar Motor: 400V, three-phase Dusdpjbqnhgsfx Afaju Please send us your pump inquiry specifying your requirements.

Stanje: rabljeno, številka stroja/vozila: 78261, Falzmaschine MB multipli-cas 524 Serien-Nr. 78261 Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – kann besichtigt werden Duedpfxoh Axyns Afaeu Lagerstandort: Emskirchen / Nürnberg – Test vor Ort möglich