Industrijski robot

KUKA KR 210 R2700 extra (4x)

Stanje: dober (rabljeno), Spindle diameter: 80 mm Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Bodpfxjphl Ecj Agtjwl Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking Bwjdorqwbiopfx Agtol • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Bsdpfxjtqqmho Agtswl Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system Bwsdpfxjtqqllo Agtol - X/Y/Z axes can also be operated via handwheels -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – Year of Manufacture 2019 – Excellent Condition, Ready for Operation! For sale is a Doosan LYNX 2100LMA CNC turning center, a high-performance machine for the precise machining of rotational parts such as shafts, cones, spheres, as well as internal and external threads. The machine is in excellent technical condition, available immediately, and ready for inspection. Key features: - High precision and reliability for both series and single-part production - Large turret with 24 tool stations (including driven tools) - Control system: SIEMENS Sinumerik 828D - Powerful spindle and driven tools for maximum productivity - Spindle bore diameter of 61 mm enables the machining of a wide range of workpieces Technical specifications: Bedpfx Asyftatjgtewl - Year of manufacture: 2019 - Max. turning length: 510 mm - Max. turning diameter: 300 mm - X-axis travel: 210 mm - Z-axis travel: 560 mm - Swing over bed: 600 mm - Swing over tailstock: 400 mm - Spindle bore: 61 mm - Max. bar diameter: 51 mm - Max. spindle speed: 6000 rpm - Number of turret tools: 24 (including driven tools) - Control system: SIEMENS Sinumerik 828D - Dimensions (L x W x H): 2805 x 1582 x 1693 mm - Weight: 3500 kg The machine is fully operational, currently connected to power, and available for viewing.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Univerzalni orodjarski rezkalni stroj DECKEL FP 3 S troosnim aktivnim digitalnim prikazovalnikom Heidenhain TNC 11 Leto izdelave: 1984 Pomik: X 500 Y 300 Z 400 mm Območje obratov: 25 – 2500 min⁻¹ Z naslednjo opremo: Toga kotna miza 850 mm x 400 mm vpenjalna površina Zasukalna vrtljiva miza Ø 450 mm z delilnimi ploščami Stružna glava Premična navpična rezkalna glava Izvlečna vrtalna puša Brezstopenjski podajalnik preko potenciometra Različni rezkalni trni SK 40 / S22 x 2 Kad za ostružke Centralna mazalna črpalka (avtomatska) za osi X, Y, Z Strojna luč Hladilna naprava 4 kosi strojnih nog Navodila za uporabo Bodpfx Ajxuh Rdjgtowl

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružniška klop, stružnica z vodilno in pogonsko vreteno, stružnica z vodilno in pogonsko vreteno -Proizvajalec: Strunguri Arad, stružnica z vodilno in pogonsko vreteno tip SNA560x2000 -Dolžina struženja: 2140 mm Bwedpfx Agjyaypketel -Premer struženja nad posteljo: 600 mm -Premer struženja nad suportom: 330 mm -Vrtina vretena: Ø 65 mm -Število vrtljajev vretena: 16 - 1600 o/min -Tro-čeljustna glava: Ø 310 mm -Ležišče konjička: MK5 -Pogonski motor: 11 kW -Dodatki: vključeni, glej fotografije -Dimenzije: 3700/1050/H1400 mm -Teža: 3600 kg

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 2000 mm Višina konic nad suportom: 300 mm Razdalja med konicami: 1600 mm Hitrosti vrtenja: 3 - 2.500 vrt/min Vpenjalni konus lunete: MK 5 Premer izvrtine glavnega vretena: 62 mm Hod pinole: 190 mm Vzdolžni pomiki: pribl. 0,001-10 nastavljivo mm/obrat Prečni pomiki: pribl. 0,001-5 nastavljivo mm/obrat Hitri pomik X-os: do 5000 m/min. Skupna potrebna moč: 40 KVA Teža stroja pribl.: 5,6 t Dimenzije stroja pribl. DxŠxV: 4,0 x 2,0 x 1,9 m Vključno z dodatno opremo, glej fotografijo Bwedpjw Rkt Iefx Agtel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, premer struženja nad prečnim suportom: 800 mm, izvrtina vretena: 92 mm, premer struženja: 800 mm, stružna dolžina: 6.000 mm, skupna dolžina: 9.000 mm, skupna širina: 1.900 mm, skupna višina: 2.100 mm, največja hitrost vretena: 1.400 obr/min, hitrost vretena (min.): 14 obr/min, HeidenHain ND-780 mit 3-Achsen-Digitalanzeige X, Zo, Z Bjdpfx Agevn Svustewl HeidenHain LS388C Maßstäbe 2 x CE-Futterabdeckung für 500 & 900 mm SCHUNK 3-Backenfutter Ø 400-102 mm Bison 4-Backenfutter ... Feste Lünette Ø 30 - 210 mm Feste Lünette Ø 210 - 370 mm Spitzenweite: 6000 mm Umlaufdurchmesser über Bett: 800 mm Umlaufdurchmesser über Planschlitten: 520 mm Umlaufdurchmesser im Bettvorsprung: 870 mm Bettvorsprungslänge: 320 mm Spindelbohrung: 92 mm Spindelleistung: 15 kW Bettbreite: 550 mm Spindelaufnahme: 6 Mk Drehzahlbereiche: 14 - 1400 U/min Länge: 9000 mm Breite: 1900 mm Höhe: 2100 mm Gewicht: 7670 kg

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders Bwedpfsh Hvk Ajx Agtol - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition