Industrijski robot

KUKA KR 16-2 R1610

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 144 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 694355, skupna masa: 235 kg, nosilnost: 16 kg, doseg roke: 1.610 mm, This is a KUKA KR 16-2 R1610 industrial robot, year of manufacture 2017. We are also pleased to offer you this robot as a fully refurbished unit upon request! The robot comes with the following options: - Board Package - EthernetKRL Gijdpfx Aet N Szpoa Usu - Load Data Determination - Profinet KRC-Nexxt - Remote Service - Safe Operation - UserTech

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 001646U en 001647U, For sale Gisdoya Ag Sjpfx Aa Uju 2x used Demag single girder overhead cranes 13,325 mm x 10,000 kg. These two cranes have been installed together in the same hall and are equipped with tandem control. We can optionally supply the cranes including: * Installation and inspection * Conductor rails * Radio remote control * Master-master controls Jan Reiling B.V. also supplies new cranes, fully customised, at highly competitive prices. * Overhead bridge cranes * Suspension cranes * Jib cranes * KBK track cranes * Boat lifts All our new and used cranes delivered with installation come with warranty! In addition, we have our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead travelling crane. Single girder, single-girder, single beam. Chain hoist, chain hoists.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, KUKA KR 16R1610-2/SEL Nosilnost: 16 kg Doseg: 1612 mm Gisdpjxz Tr Tofx Aa Uou

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, dolžina mize: 760 mm, širina mize: 510 mm, obremenitev mize: 1.000 kg, For sale is a 3-axis CNC milling machine from Hurco, model VMX 24. Technical data: - Year of manufacture: 2001 - Control unit: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. workpiece weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull studs seen in the photos are not included in the offer. Transport and loading can be organized Europe-wide upon request for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Gsdpfsv Tcfkox Aa Ueiu Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Injection Moulding Machine Krauss Maffei KM 1100 – 12000 MX Robot - Wittmann Year of manufacture - 2008 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and three built-in USB ports. Plasticising unit Complete plasticising unit for thermoplastics, abrasion-resistant version, with a 120 mm screw diameter, non-return valve, and open nozzle. TECHNICAL DATA Clamping unit - Clamping force: 11,000 kN - Mold opening force: 770 kN - Platen dimensions (h x v): 2210 x 1910 mm - Tie bar clearance (h x v): 1550 x 1250 mm - Mold opening stroke: 2000 mm - Mold height installation (min - max): 600 - 1200 mm - Platen daylight: 2600 mm - Ejector stroke: 300 mm - Ejector force: 220/110 kN Gsdpfxevu Hp Ao Aa Usiu Injection unit - Screw diameter: 120 mm - Injection pressure: 1758 bar - Injection volume: 6786 cm³ - Shot weight (for PS): 6175 g - Screw speed, standard/option: 103/145 rpm - Injection rate (standard): 1118 ccm/s - Injection rate (accumulator): 1696 ccm/s Electrical and hydraulic equipment - Pump motor rated power: 132 kW - Installed heater power: 82 kW - Number of heating zones on the barrel: 7 - Dry cycle rate according to Euromap: 802 1/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 73 t - Machine dimensions (L x W x H): 12.47 x 3.65 x 2.82 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 7 h, ABB 2600-12/1.85 Tip B + Trackmotion 2,9 metra, kompletno kot novo, DTC 7 ur, leto 2019 RAZVOJ GSG ROBOTICS GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marl od leta 2015, z obsežnim servisnim območjem za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celovitega partnerja na vseh področjih v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za znana proizvajalca robotov ABB in Fanuc. Gijdpfx Aoyl Avqja Uou

Stanje: rabljeno, Leto izdelave: 2018, Industrijski robot Proizvajalec: Kuka Gjdpfx Ajxtdalsa Ueiu Tip: KR16 R1610 Cybertech Leto izdelave: 2018 Doseg: 1.612 mm Teža: 263 kg Nosilnost: 16 kg Kuka krmiljenje KRC4 Teža: 145 kg Programska različica: V8.5.4 Kuka zaslon na dotik Kuka povezovalni kabli ä3626

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), A large-format Krauss-Maffei injection molding machine without robot, conveying equipment, safety enclosure, or attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Overall system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83,000kg, operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected to be available from Q1/2026. Gsdpfx Aswut Hyea Uoiu

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, The machining center has been inspected by a Hurco technician and declared fully functional without any faults. Technical specifications - Travel: X-axis 1,270 mm, Y-axis 600 mm, Z-axis 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40, Type B - Feed speed: up to 23 m/min Worktable: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control system: - Hurco Ultimax 4, incl. software for milling simulation - Electronic hand control panel - Interfaces: RS 232C / V24 - 2 monitors for text and graphic editing - 2 software units for plain text and ISO programming Gedjx Iikbspfx Aa Ujiu Machine construction: - High rigidity, also suitable for roughing Tool changer: - Double-arm gripper with 24 stations Equipment: - Cooling unit for milling spindle - Flushing system for chip removal - Splash guard enclosure - Coolant system with filtration - Internal coolant supply (ICS) 20 bar - Chip conveyor Machine data: - Required floor space (excluding service areas) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400 V, 50/60 Hz A viewing of the machine can be arranged by appointment. All tools and operating equipment shown in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. Giodpfx Ajugmx Aea Ueu All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.