Drugi

KUBOTA Trecker 1400 Diverse mit Zapfwelle am Heck und H

Stanje: dober (rabljeno), prevoženi kilometri: 11.625 km, vrsta goriva: bencin, barva: zelen, voznikova kabina: dnevna kabina, Leto izdelave: 1957, Namen uporabe: prevoz blaga Položaj volana: Levo Lastna teža: 3.740 kg Tehnično stanje: dobro Ijdpjtpm Hyofx Aa Usar Vizualno stanje: dobro Država izdelave: NL Za več informacij se obrnite na Vink Machinery. DAF YA126 za prevoz ranjencev * 1957 * Bencin * 11.625 kilometrov * Opremljen z grelcem spredaj in zadaj * Dobavljen z dodatki * 3.740 kg lastne teže * Vključuje potrdilo o registraciji tovornjaka * Brez registracijskih papirjev za prikolico * MARGE!

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Iaedpfxsi Ezx Ds Aa Uor Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: skoraj kot novo (rabljeno), CENA: 2000 EUR Mlinček za meso Popolnoma izdelan iz nerjavečega jekla Dimenzije: 415x705x930 mm Isdpfx Aaoxwfppo Ujar Električna moč: 1,8 kW Napetost: 220V/50Hz Kapaciteta: 750 kg/h

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process Iaedpfxepm U U Ns Aa Uor * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Stanje: novo, High-quality wood chipper for professional use – No problems even with heavily branched material! With road approval, the HX16 Pro can be transported quickly and easily wherever you need it. The HX16 Pro wood chipper is specifically designed for professional applications, featuring a robust construction and powerful drive system to effortlessly handle even heavily branched wood. This chipper easily processes logs with an impressive diameter of up to 16 cm. It is powered by a robust 35 HP Rato petrol engine and equipped with a no-stress automatic feed system, which prevents engine stalling under heavy load and ensures smooth operation. The HX16 Pro comes with an "AL-KO" chassis and lighting system to meet your operational requirements. Key features of the HX16 Pro wood chipper: Ijdpfx Aetr Azgea Uoar - Maximum log diameter: 16 cm - Infeed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Experience the power and reliability of a truly professional wood chipper with the HX16 Pro. Contact us for a tailored quotation!

Stanje: dober (rabljeno), Industrijski roboti Proizvajalec: Kuka Tip: KR6, KR6-2, KR6arc Tip: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Vsi tipi z upravljanjem KRC2ed05 Kuka KR6 KRC2ed05 Letnik izdelave: 2006 Kuka KR6-2 KRC2ed05 Letnik izdelave: 2011 Iedpetuc U Refx Aa Ujar Kuka KR6arc KRC2ed05 Letnik izdelave: 2006-2007 = več na zalogi Kuka KR16L6 KRC2ed05 Letnik izdelave: 2009 Kuka KR16L6-2 KRC2ed05 Letnik izdelave: 2011 Kuka KR16 KRC2ed05 Letnik izdelave: 2007-2009 = več na zalogi Kuka KR16-2 KRC2ed05 Letnik izdelave: 2010-2012 = več na zalogi Kuka KR16-2 Speed KRC2ed05 Letnik izdelave: 2012 = več na zalogi Kuka KR16-2 Foundry KRC2ed05 Letnik izdelave: 2012

Stanje: novo,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, številka stroja/vozila: KK052469, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 4kW Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for feed unit Safety guards for hand routers Spindle diameter 30 mm Aigner fence Extraction connection 2x 120 mm Iodpsiinm Hofx Aa Usar Speeds: 1400/3500/6000/8000 rpm Operating manual

Stanje: novo, lastna masa: 250 kg, največja dovoljena obremenitev: 500 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.060 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.300 mm, Kart trailer from the trailer manufacturer VEZEKO, model KART-2. Isdsui Nu Hepfx Aa Uoar This lid trailer allows for easy loading of two karts. One kart is positioned on the floor, the other is mounted on the wall bracket. The standard features of the Kart lid trailer include a wall bracket for the second kart, lockable lid, double-wing rear doors, jockey wheel, robust galvanized frame, and a sturdy tubular drawbar. We also offer kart trailers as box trailers. Trailer accessories such as lashing straps, storage boxes, wheel restraints, and locks are also available.

Stanje: dober (rabljeno), Spindle moulder, table milling machine - Spindle moulder: with fixed spindle Iedpscl Svvsfx Aa Ujar - Speeds: rpm - Motor power: kW - Dimensions: 1000/1870/H1040 mm - Weight: 560 kg