Cisternska prikolica

Kroll KROLL ADR- Sauganhänger K 14,0 / 36 PE (Kolben)

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 80 kg, skupna širina: 990 mm, skupna višina: 870 mm, skupna dolžina: 1.180 mm, višina zlaganja: 800 mm, kapaciteta rezervoarja: 900 l, lastna masa: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking containers, storage bins, made of galvanized sheet steel. Manufacturer unknown Dimensions of the stacking container (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height of the box: 700 mm Box capacity: approx. 0.9 m³ Weight: approx. 80 kg each Cpjdpfjvtckmox Afnow Note: The steel stacking containers were previously used on construction sites by the former owner as containers for sorted construction waste. Emptying into larger transfer bins/containers was carried out using a forklift with rotating forks. For this reason, the stacking containers were manufactured with extra heavy-duty walls. Sale is subject to change without notice and is made to commercial customers only, excluding any warranty or guarantee. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Leto izdelave: 2022, obratovalne ure: 0 h, stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. ----- Cpsdpfx Afef Sqfqsnew The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Larom hammer mill, model Lau 8 Feed opening: 1650x700 mm Electric motor Mounted on chassis, regulation hopper, vibrating feeder. Cpedpfjim Eanox Afnsw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, For optimal recovery of non-ferrous metals or material purification Cpedpfx Afsvdqdisnew This extremely powerful machine is primarily used for the processing of municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bottom ash, as well as electronic waste. The IMRO non-ferrous metal separator meets the demand for very high recovery rates and high purity levels.

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste Cpsdpfxox Nkhqo Afnew • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2004, IMAMO 24 TAKIH REZALNIKOV, PRI NAKUPU VEČ KOSOV LAHKO PONUDIMO PAKETNO CENO Tip: EH 400/1 Serijska številka: 901 Leto izdelave: 2004 Napetost/frekvenca: 400 V/50 Hz Nazivna moč: 3 kW CE certifikat: Da 🛠️ Opis naprave Industrijski rezalnik ali mlin (rezalnik/granulator). Cpodpsxapr Hofx Afnow Vidne lastnosti na slikah: Sistem z vrtečimi rezili (rezalna enota) na 2 mm osi 3 kW SEW motor z reduktorjem 8 mm sito (označeno kot ‘8 mm sito’) – določa velikost izhodnih delcev Mobilna in transportna zasnova Kontejner za izpust materiala in spodnji motorni sistem Stroji te vrste se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Ostružki lahkih kovin Elektronski odpadki

Stanje: rabljeno, Leto izdelave: 1981, -1- rabljeni udarni mlin za trde kamnine, vhod ca. 350 x 690, rotor 1000 x 670, zmogljivost do 40 t/h, z električnim motorjem Cedpow N Hk Hjfx Afnepw

Stanje: novo, Leto izdelave: 2026, Mini žerjav na goseničnem podvozju TB5000 Mini žerjav na goseničnem podvozju, namenjen za delo v zaprtih prostorih in na prostem. Maksimalna nosilnost: 2400 kg. Cjdpjibqraefx Afnjpw * radijsko upravljanje naprave - vožnja, delo, razpiranje stopal * dvojno žerjavno napajanje - dizelsko in električno 230 V * največja nosilnost - 2400 kg * sistem za zaščito pred preobremenitvijo kot standard * največji vodoravni doseg nad 11 m * štirje hidravlični podaljški + 1 ročni podaljšek * največji navpični doseg nad 13 m * 4 hidravlično spuščene podpore * teža cca 2200 kg * višina cca 195 cm * širina cca 88 cm * aktivna roka 16 stopinj Dodatna, opcijska oprema: *iskalni kavelj * hidravlični vitel 990kg * Napajanje z litij-ionsko baterijo * blazinice za oporne noge *hidravlični FLY JIB Na voljo v barvi po vaši izbiri.

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM),

Stanje: rabljeno, Leto izdelave: 1977, Drilling capacity in steel (diameter): 75 mm Arm reach: 1,700 mm Workpiece height - max.: 370 - 1,700 mm Total power requirement: 12 kW Machine weight approx.: 7,000 kg Cpjdpfx Afet Hw Uvenew Space requirements approx.: m Manufacturer: CSEPEL (Hungary) Radial drilling machine Model: RFh 75 / 2 000 Year of construction: 1977 61158 _____ Drilling capacity in steel / cast iron: 75 / 90 mm Tapping capacity in steel / cast iron: 60 / 70 mm Maximum arm reach approx.: 1,700 mm Maximum workpiece height: 370 to 1,700 mm Table clamping surface: 1,100 x 2,300 mm Intermediary table approx.: 600 x 1,200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MT 5 21 spindle speeds: 19 – 1,900 rpm 12 feed rates: 0.047 – 2 mm/rev Quill travel: 380 mm Vertical adjustment of arm: 950 mm Cross travel of drilling carriage: 1,500 mm Spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7,000 kg Dimensions approx.: 3,600 x 1,400 x 3,400 mm (height) Accessories / Special equipment: • Pre-selector switch for hydraulic speed adjustment • Mechanical feed pre-selection • Drilling with or without feed, or with manual fine feed • Drill carriage manually adjustable, vertical arm adjustment via electric motor, feed length/drilling depth set via cams on quill vernier with automatic depth stop and quill return • Electro-mechanical clamping of arm and drilling head via push button • Coolant system integrated in sub-table • VOGEL central lubrication, intermediary table, etc. Condition: satisfactory to good – demonstration under power possible, stable machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice