Stroj za brizganje
KraussMaffei KM 650-3500 C2

Name: KraussMaffei KM 650-3500 C2
Brand: KraussMaffei
Availability: InStock

Leto izdelave

2004

Stanje

Rabljeno

Lokacija

Wrocław

Stroj za brizganje KraussMaffei KM 650-3500 C2

Prikaži karto

Podatki o stroju

Opis stroja:: Stroj za brizganje

Proizvajalec:: KraussMaffei

Model:: KM 650-3500 C2

Leto izdelave:: 2004

Stanje:: zelo dobro (rabljeno)

funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Kwiatkowskiego 5a, 52-407 Wrocław, PL

Klic

Podrobnosti ponudbe

ID ponudbe:: A19498881

Nazadnje posodobljeno:: dne 04.07.2025

Opis

KRAUSS MAFFEI KM 650-3500 C2 Injection Moulding Machine
Year of manufacture: 2004
Operating hours: 70,000

Included in the package:
Wittmann W643-339 Robot

X Axis (servo): 1200 mm
Y Axis (servo): 2400 mm
Z Axis (servo): 6000 mm
C Axis (servo): ±90°
A Axis (servo): ±180°
4 vacuum circuits
4 gripper circuits

Clamping unit:
Clamping force: 6,500 kN
Mould opening force: 346 kN
Movable platen shift force:
— Opening: 169 kN
— Closing: 144 kN
Platen dimensions (H × W): 1,490 × 1,440 mm
Tie bar clearance (H × W): 1,000 × 930 mm
Mould opening stroke: 1,150 mm
Minimum mould height: 600 mm
Fully hydraulic clamping system
Gbodpfjwxb Rbex Ah Deu

Injection unit:
Screw diameter: 100 mm
Injection pressure: 1,742 bar
Injection volume: 2,411 cm³
Shot weight for PS: 2,170 g
Injection rate: 649 cm³/s
Complete plasticizing system for thermoplastics, with non-return valve and open nozzle

Control system:
MC4 control system with colour monitor
Integrated operator panel
Built-in floppy disk station

Electrical-hydraulic equipment:
Pump motor power: 90 kW
Heater capacity: 44 kW
Number of cylinder heating zones: 7
Oil tank capacity: 1,240 l

Dimensions and weight:
Net weight with control cabinet: 33.5 t

Technical condition – Service and upgrades:
All hydraulic hoses replaced: 12/2024
Last Krauss Maffei technical inspection: 03/2024
New screw drive (hydraulic): 01/2025
New non-return valve: 01/2025
Fully functional magnetic mould clamping system (magnetic plates)

The machine is in very good technical condition and ready for operation.
If interested, we are happy to provide further information, send photos or videos, or invite you for an inspection.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2019

115 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+48 71 70... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Wrocław

566 km

Stroj za brizganje
KraussMaffeiKM 650 - 3500 C2

Klic

Stanje: dober (rabljeno), Leto izdelave: 1997, Krauss Maffei Injection Moulding Machine KM 650 - 3500 C2 Year of manufacture: 1997 Fully hydraulic clamping system. MC 3 control system Plasticising unit SP 3500 Complete plasticising system for thermoplastics, version with abrasion protection, screw diameter 90 mm, with non-return valve and open nozzle. Clamping unit: Complete plasticising system for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. TECHNICAL DATA: Clamping unit: - Clamping force: 6,500 kN - Mould opening force: 346 kN Gjdpfevlpcgex Ah Dobu - Movable platen travel force: -- Opening: 169 kN -- Closing: 144 kN - Mounting platen dimensions (h x v): 1,490 x 1,440 mm - Tie-bar spacing (h x v): 1,000 x 930 mm - Mould opening stroke: 1,150 mm - Minimum mould height: 600 mm - Maximum daylight: 1,750 mm - Ejector stroke: 250 mm - Ejector force: 226/285 kN Injection unit: - Screw diameter: 90 mm - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection rate: 649 cm³/s - Increased injection rate: - Electro-hydraulic equipment: - Pump motor rated power: 90 kW - Installed heater capacity: 44 kW - Number of barrel heating zones: 7 - Oil tank capacity: 1,240 l Dimensions and weight: - Net weight with control cabinet: 39.5 t - Machine dimensions (L x W x H): 9.36 x 2.65 x 2.44 m

Poglej podrobnosti

mali oglas

Stroj za brizganje več kot 5000 KN KraussMaffei KM-650-3500 C-2

Nemčija

5.343 km

Stroj za brizganje več kot 5000 KN
KraussMaffeiKM-650-3500 C-2

Klic

Dražba

Stroj za brizganje plastike + robot KraussMaffei KM 650 - 3500 C2

Woiwodschaft Niederschlesien

567 km

Stroj za brizganje plastike + robot
KraussMaffeiKM 650 - 3500 C2

Podrobnosti

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 100 mm, tlak vbrizgavanja: 1.742 letvica, minimalna višina orodja: 600 mm, odmični hod: 1.150 mm, širina plošče: 1.440 mm, višina plošče: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Sliding plate opening force: 169 kN Sliding plate closing force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear space between tie-bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight including control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection by Krauss Maffei: 24/03 New (hydraulic) screw drive: 25/01 New check valve: 01/25 Gedpfx Aowp Si Neh Dobu EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with a 100 mm screw diameter, check valve, and open nozzle

Poglej podrobnosti

Oglašujte tukaj