KM 110-520 C1

Krauss-Maffei

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dodpfx Aeycqc Tefxsun FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični Duodpfxjyh I Eme Afxjn

Stanje: generalkompletno obnovljen (rabljeno), Krauss Maffei injection moulding machine 25 tons Year: 2000 Duodjrdg Tpspfx Afxen The IPC does not work (see card)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 70.936 h, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection molding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Please check the possibility to purchase this Krauss Maffei 420 - 4300 CX hydraulic injection molding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mold installation height: 380 mm Dujdpfx Afeyhby Hoxen • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 cc • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticizing rate: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Mold sensors: Priamus (p=2 / t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 44.678 h, vpenjalna sila: 2.500 kN, This hydraulic injection moulding machine, Krauss Maffei 250 - 1000 CX, was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1,050 mm • Minimum mould installation height: 330 mm • Distance between platens: 1,150 mm Dodpfxsyhbq Es Afxoun • Max. total mould weight: 3,430 kg (fixed: 1,715 kg / moving: 2,286 kg) • Core-pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Wear-resistant unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C-axis combination (includes KM LRX 150 linear robot) • Hot runner controller: 12 zones • Cooling: 4 x HB 100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 60.159 h, vpenjalna sila: 5.000 kN, premer vijaka: 35 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is designed for high-quality injection molding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection molding machine. Contact us for further details. Dujdpsyg Hz Hsfx Afxen • Clamping Unit • Mold Weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Minimum Mold Diameter: 560 mm • Opening Stroke: 1170 mm • Min. Mold Installation Height: 480 mm; Max: - • Maximum Platen Distance: 1650 mm • Mounting Plates (H × V): 1270 × 1200 mm • Tie Bar Clearances: H 900 mm / V 800 mm • Locating Ring Diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector Force: 95.4 kN • Retraction Force: 48.6 kN • Pneumatic Ejector: yes • Core Pull / Controls • Core Pull Control: 2 (AS) + 2 (DS) • Shut-off Nozzle: 2 hydraulic / 0 pneumatic • Process Control (SPC): yes (Kistler, p=2 / t=0) • Printer Interface: no / 12-way USB • Hot Runner Control: no • Injection Unit 1 • L/D Ratio: 20 • Screw Diameter: 90 mm • Max. Shot Volume: 2290 cm³ • Max. Shot Weight (PS): 2084 g • Injection Pressure: 1839 bar • Plasticizing Rate: 185.8 g/s • Screw Speed: 270 rpm • Nozzle Bore: 6 mm • Pump Power / Heating Power: 90 kW / 44 kW • Miscellaneous • Max. Crane Load: 10 tons • 2K capable: no • Filter Nozzle/Grinder: no • Operating Hours: 60,159 h Additional Equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), A large-format Krauss-Maffei injection molding machine without robot, conveying equipment, safety enclosure, or attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Overall system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83,000kg, operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected to be available from Q1/2026. Dedpswut Hyjfx Afxsun

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Duedpfx Aouiykdofxon

Leto izdelave: 2022, Stanje: pripravljen za uporabo (rabljen), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen system. Plasticising capacity: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1,700t, controller: MC6. 2) Industrial robot KUKA IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3,100mm, repeatability: +/-0.05mm, controller: KR C5. Documentation available. On-site inspection possible. Djdjvpvlcopfx Afxeun

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Working area: 2800x1600mm, swivel angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Djdpfsh Nm S Hex Afxjun