KM 125-620 C1

KRAUSS-MAFFEI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Csdpfx Aoycqc Tsfxsgn Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Cgedpfx Aouiykdjfxjn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 70.936 h, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection molding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Please check the possibility to purchase this Krauss Maffei 420 - 4300 CX hydraulic injection molding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mold installation height: 380 mm Codpfxsyhby Ho Afxogn • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 cc • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticizing rate: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Mold sensors: Priamus (p=2 / t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 44.678 h, vpenjalna sila: 2.500 kN, This hydraulic injection moulding machine, Krauss Maffei 250 - 1000 CX, was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1,050 mm • Minimum mould installation height: 330 mm • Distance between platens: 1,150 mm • Max. total mould weight: 3,430 kg (fixed: 1,715 kg / moving: 2,286 kg) • Core-pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Wear-resistant unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Codpfx Ajyhbq Eefxegn Additional equipment • Automation: Linear robot LRX 150 with B/C-axis combination (includes KM LRX 150 linear robot) • Hot runner controller: 12 zones • Cooling: 4 x HB 100

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Injection moulding machine With two components KraussMaffei Multiinject KM200-1000-390 CZ Cjdsfx Tztopfx Afxjgn Year of manufacture: 1998 Clamping force: 200 t Screw diameter: 60 mm - 566 g Second screw: 35 mm - 178 g Tie bar spacing: 560 x 560 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 60.159 h, vpenjalna sila: 5.000 kN, premer vijaka: 35 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is designed for high-quality injection molding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection molding machine. Contact us for further details. • Clamping Unit • Mold Weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Minimum Mold Diameter: 560 mm Csdpfx Afoyg Hz Hsxsgn • Opening Stroke: 1170 mm • Min. Mold Installation Height: 480 mm; Max: - • Maximum Platen Distance: 1650 mm • Mounting Plates (H × V): 1270 × 1200 mm • Tie Bar Clearances: H 900 mm / V 800 mm • Locating Ring Diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector Force: 95.4 kN • Retraction Force: 48.6 kN • Pneumatic Ejector: yes • Core Pull / Controls • Core Pull Control: 2 (AS) + 2 (DS) • Shut-off Nozzle: 2 hydraulic / 0 pneumatic • Process Control (SPC): yes (Kistler, p=2 / t=0) • Printer Interface: no / 12-way USB • Hot Runner Control: no • Injection Unit 1 • L/D Ratio: 20 • Screw Diameter: 90 mm • Max. Shot Volume: 2290 cm³ • Max. Shot Weight (PS): 2084 g • Injection Pressure: 1839 bar • Plasticizing Rate: 185.8 g/s • Screw Speed: 270 rpm • Nozzle Bore: 6 mm • Pump Power / Heating Power: 90 kW / 44 kW • Miscellaneous • Max. Crane Load: 10 tons • 2K capable: no • Filter Nozzle/Grinder: no • Operating Hours: 60,159 h Additional Equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Stanje: rabljeno, Krauss Maffei main board Codpfxsu Axiho Afxjgn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 used injection moulding machine with robot Manufacturer: KRAUSS MAFFEI Model: CX250-1000 Year of manufacture: 2010 Clamping force: 300 tons Tie bar spacing: 630 x 630 mm Minimum mould height: 330 mm Opening stroke: 820 mm Screw diameter: 50 mm Max. shot volume: 432 cm³ Shot weight: 393 g/PS Control system: MC5 Cgjdpfxowcb Nro Afxen Equipment: Robot: Krauss Maffei, type: LRX100S 2 core pulls on the moving platen High-wear-resistant injection unit

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 49.673 h, vpenjalna sila: 800 kN, premer vijaka: 35 mm, razmak između stupova: 520 mm, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2,429 letvica, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, dolžina plošče: 740 mm, širina plošče: 640 mm, vgradna višina: 300 mm, skupna dolžina: 5.350 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 6.500 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, prosta razpetina: 790 mm, Oprema: dokumentacija / priročnik, Inventarna številka: 503232 Proizvajalec: KRAUSS MAFFEI Tip: KM 80-380 EX Cgjdpfjygv I Nsx Afxjn Krmiljenje: MC5 Leto izdelave: 2008 Delovne ure: 49.673 h Zatezna sila: 800 kN Razmik vodil h x v: 520 x 420 mm Velikost plošč h x v: 640 x 740 mm Minimalna vgradna višina: 300 mm Maksimalna razdalja med ploščami: 790 mm Premer polža: 35 mm Količina hoda: 154 ccm Tlak brizganja: 2429 bar Oprema Besedilo na zaslonu v nemščini CEE-vtičnica 16A Zračni ventil 1x Stroj z dozirnim lijakom Stroj z vodno baterijo Izravnalni elementi Vmesnik EUROMAP 67 Vmesnik USB Schuko-vtičnica 10A Ogrevanje orodja 24x Dimenzije stroja D x Š x V: 5,35 m x 1,7 m x 2 m Skupna teža: 6.500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as dealers in injection moulding machines, are pleased to offer the following well-maintained used injection moulding machine for sale. Naturally, we also purchase well-maintained injection moulding machines—currently seeking models from year of manufacture 2010 onward. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax incentive and benefit for used machinery: From 01.07.2025, used machines can also be eligible for an annual special depreciation of 30% for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as for new equipment. Keyword: Growth Booster (§ 7 Paragraph 2 EStG-E) Currently in stock at our Hanover warehouse, tested and ready Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP – Thermoplastics Extras: 2 additional robots: Linear Robots LRX 100 and LRX 50 can also be purchased separately. - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Accumulator for enhanced injection performance - Fast SK decompression CX Midrange - Ejection of solidified nozzle plug - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve for BWAP blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle storage - Trend chart – target/actual graphic - PV control - Active back pressure control - From first ownership – origin Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 2,500 kN / 250 tons Tie bar spacing: 630 x 630 mm Mounting platens: 995 x 1050 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2,304 bar Robot LRX S50: - 3 gripper circuits – 4 vacuum circuits Robot LRX 100: - 1 gripper circuit – 4 vacuum circuits Electrical equipment: Pump: 45 KW Heating: 5 zones, 18.7 KW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Cedjxqhuujpfx Afxjgn Full documentation, manual, and software included. Available immediately EXW Hanover (Germany) warehouse or delivered carriage paid (subject to freight charge reimbursement). The machine is offered in fully tested working order and is our sole property. It is available for immediate inspection and demonstration under power at our Hanover warehouse. For your information on our machines and company: - We only sell machines that we have purchased from active production for our own stock in Hanover. - All machines are inspected and tested before dismantling. - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All machines offered come from successful companies where maintenance and care are standard practice. - All machines can be inspected at our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 77.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Type: KM 200-700 C2 (CLEANROOM) Year: 2000 Screw diameter: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Injection pressure: 1,892 bar Tie bar spacing: 560 x 560 mm Platen size: 915 x 915 mm Minimum mould height: 350 mm Cgjdjwm Ifnepfx Afxsn Opening stroke: 700 mm Daylight: 1,050 mm

Stanje: novo, Gre za nove, neuporabljene rezervne dele. Krauss Maffei MC 5 prikazovalnik M5V121, nov, neuporabljen. Kupljen za Krauss Maffei stroj z zmogljivostjo 2300 ton. Prikazovalna enota M5, 12-mestna, dimenzije D x Š x V 310 x 360 x 60 mm, teža 3600 g. Cgedpfx Afjygucfsxsn

Leto izdelave: 2020, Stanje: novo, Krauss Maffei touch panel, latest version for MC5/MC6, spare parts Csdpfeqvuicsx Afxsgn Width: 37 cm Height: 47 cm Depth: 8 cm

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 878 40013, vpenjalna sila: 2.500 kN, Popolnoma delujoč stroj. Številni obrabni deli so bili pred kratkim zamenjani. Cgedpfx Ajxtmp Nefxjn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax note and advantages for used machinery: As of 01.07.2025, even used machines are eligible for a special depreciation of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower 2-Colour 2-Component machine Control system: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h 1st Injection Unit 750 horizontal Injection unit / screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Injection unit / screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen distance: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Machine weight: 9,000 kg Extras Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cjdeyf Uy Uspfx Afxsgn Water BGS: 6 circuits each on nozzle and ejector sides BluePower technology: up to 40% energy savings The machine is very well-maintained and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: ex works, loaded onto buyer’s truck, or free delivery within Germany with freight cost compensation. Further information about our offered machines and our company: - We only sell machines we have acquired from active production, ex stock Hanover. - All machines offered are inspected and tested before dismantling. - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All machines offered are available for inspection at our warehouse.