Oprema

Konecranes 5T TRAVERS CRANE

Stanje: dober (rabljeno), številka stroja/vozila: 2057, Leto izdelave: 2008, nosilnost: 5.000 kg, Mostno dvigalo Konecranes 5T TRAVERS od Uniktruck Hedpfeyuhi Uox Afaep

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Hjdpfx Afjv S E Dgjaop Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Request technical specifications.

Stanje: dober (rabljeno), številka stroja/vozila: 2055, Leto izdelave: 2008, Mostno dvigalo Konecranes 5T TRAVERS od Uniktruck Hodpfxeyuhizs Afaep

Stanje: novo, Leto izdelave: 2024, The Just Lift Crane JL250 to JL750 from Just Lift has been designed to accelerate and optimize all lifting and logistics processes, increasing productivity while ensuring maximum safety and ergonomics for the operator. - Motorized drawbar head steering - Arm control via remote controls - Hydraulic lift and extension - Standard anti-tip system - 100% electric Max. forward driving speed km/h 4.0 Max. reverse driving speed km/h 4.0 Lifting system max. load capacity kg 250 to 750 No. of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm retracting speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil capacity l 2.00 Weight without batteries kg 610 to 1,080 Net weight incl. 105/130A AGM batteries kg 680 to 1,146 Max. length mm 2,835 Min. length mm 1,891 Width mm 980 Handlebar/drawbar height mm 1,229 Max. height mm 3,030 Min. height mm 2,313 Max. lift height mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Hjdpfx Aeh Tx R Tsfaep Currently, we can offer only new equipment.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 55.771 h, laserske ure: 35.157 h, laserska moč: 3.200 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 140 m/min, natančnost pozicioniranja: 0,02 mm, leto zadnje generalne obnove: 2024, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 150 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, Laser je v obratovanju, možen ogled in preizkus. Redno servisiran, v dobrem tehničnem stanju. Vsa ogledala so bila popolnoma zamenjana leta 2024. Hedpfx Asv Hxbbefasp

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Hsdpfx Aet Hw Shofaep Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Panel saw for acrylic glass (Plexiglas) and wood panels with extraction unit Very good condition! Maximum cutting height: 2200 mm Maximum cutting length: 4200 mm Maximum cutting thickness: 60 mm Length: 5600 mm Depth: 1400 mm Hsdpfx Afsinunqeasp Height: 2900 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, pritisk: 6 letvica, LiSEC, KSR-25, right – left, year of manufacture 2010 Vertical glass seaming machine, h = 2.50 m Hodpfx Afsv Eguyoajp In fully automatic cycle, the compact seaming machine grinds the edges of glass panes on all four sides. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Hedpfx Afjfxpbmsajp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Hodpfx Aop Audqofaep Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002