Obdelovalni center Kondia ZM 99 Mf FANUC

KONDIA ZM 99 MF

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, skupna širina: 2.900 mm, skupna višina: 3.300 mm, Rabljeni stroj CNC-rezalnik/plotter, rezalna površina v X in Y: 2.500 x 2.100 mm. Multifunkcijski CAM-rezalni sistem s CNC-rezilno tehnologijo za 2D rezanje usnja, tkanin, tehničnih tekstilij, pene in drugih ploščatih, polfleksibilnih ali togih, nemetalnih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 večnamenska nosilna glava za orodja Stroj se prodaja z motornim krožnim nožem, električnim oscilacijskim nožem in rezkalnikom (vključno z odsesovalno napravo). • Večnamenska glava omogoča uporabo do 3 zamenljivih orodij • Zmogljiv vakuumski ventilator za fiksiranje materiala • Standardno opremljen s sivo transportno mizo (trakasti transporter). Po želji možen zamenljiv zeleno-modri transporter (nudi visok kontrast za temnejše materiale). Možnost dodatne opreme (po povpraševanju): • EOT električni oscilacijski nož • POT pnevmatski oscilacijski nož • PRT motorni krožni nož • UCT univerzalni (vlečni) nož • KCT Kiss-Cut orodje • CTT utorni valj • V-Cut kotni rezalni nož • Prepoznavanje tiskarskih oznak • Kamera za registracijo • Prebijalno orodje za zareze ali luknje Gjdpfx Asif Ek Rjdksbr • Rezkalnik z odsesovalno napravo Enostavna uporaba • Enostavna menjava rezalnih orodij, "PLUG & CUT" • Intuitiven uporabniški vmesnik • Hitra menjava rezil • Vakuumske cone se aktivirajo s klikom Hitro povračilo investicije • Nizki stroški pri visoki dodani vrednosti • Optimalen izkoristek materiala s programsko opremo nest expert (ni vključena v obseg dobave) • Visoka hitrost • Konstantna natančnost Tehnični podatki: • Kratki časi rezanja zaradi visoke pozicijske hitrosti do 90 m/min • Ponavljiva natančnost +/- 0,25 mm • Reže enoslojno ali večslojno • Primeren za pločevino ali kolute (možna nadgradnja z ustreznim odvijalcem) • Hitra amortizacija (Slika izdelka je simbolična) Stroj je CE-certificiran.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition Gjdpfxjyuzg Hs Adkobr - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation Gbsdpfohuthyjx Adksr

Stanje: rabljeno, Leto izdelave: 2005, - Fagor 8055 CNC control - Additional tank for spindle internal cooling (15 bar) 400 liters - Year of manufacture: 2005 Technical data: - Travel distance X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm Gjdpetvf Htofx Adkebr - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine as per photos Gsdpfx Aevf D Anedksbr Condition: Except for a defective slot in the tool magazine, very good! Tool holders available

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Gbedpfx Ajlz Rvlsdker Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Gbsdsd Nw Ttspfx Adkjr Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Vrsta: CNC stružnica (vodoravna) Proizvajalec: Spinner Tip: TC 52 Leto izdelave: 2007 Serijska številka: 123445 Krmiljenje: Fanuc Trosna stroj: XZ C (osi C le za pozicioniranje: brez pogonskih orodij) Premer palice: 42 mm Trivpenjalno vpenjalo: 165 mm Delovne/vrtilne ure: cca 32.500 h / 6.400 h (odčitano 11/2025) Gedpfxeyki Hme Adksbr Dodatna oprema: transporter za ostružke, IKZ (centralno hlajenje), vpenjalno glavo, dokumentacija Stanje: dobro

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis Gbsdpfxjx D Drcj Adker • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: rabljeno, Technical Details: Length: 750 mm Height: 800 mm Welding current: 120 Machine weight approx.: 180 kg Dimensions (L x W x H), Welding unit: 0.75 x 0.52 x 0.8 m Dimensions (L x W x H), Compressor: 1.2 x 0.5 x 0.9 m Plasma Cutting Machine Cutter: Manufacturer Jäckle, Year 2005 - Cutting capacity: 30 kVA - TIG / MMA welding - Cooling type: F - Incl. torch package, 6.0 meters - Incl. ground cable, 12.0 meters OPTIONALLY available for sale: Piston compressor: Manufacturer Schneider Type Universal 650-60D, Year 1993 Gbjdpfx Adsu R A Dlekjr - Filling capacity: 500 l/min - Flow rate: 616 l/min - Compression pressure: 10 bar - Max. power: 4 kW - Incl. compressed air hose, approx. 4 meters - Mobile on two wheels