Dinamični pralnik za plastične odpadke ERFOR®

Koltex Plastic Recycling Systems DR8

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 38 t, moč: 5,5 kW (7,48 KM), Neu auf Lager Avermann MPC 20 PEL Optional mit Behälterlift Laodpfx Ajwhfu Ael Nja

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), NEUE HERBOLD Granulator Universal Mill – Heavy-Duty Version - Year of manufacture: 1998 - Constructed from stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) Lodpfx Alsh Rwc Ej Njaa - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ESS B2 - *M 0--.10*, Star screen for screening materials such as soil, compost, wood chips, etc. Ledpfsirnrpjx Al Neaa Weight: 2,700 kg. Selectable screening size from 12 to 40 mm. Connection: 3-phase 400 V, 32 A, frequency 50 Hz, total power 11.25 kW. Throughput: 40 to 60 m³/h depending on material and screen size. Delivery time: approx. 14 weeks after order confirmation.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and install them upon request by prior arrangement. Optional: Stainless steel discharge element, stainless steel storage silo, blower, and approximately 3 meters of piping. Grinding mill 800 series, 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators Screen deck as per your request Laedpfx Ajt Iw Huel Nja with Variable Frequency Drive, optional Product discharge and storage available in various configurations at highly competitive prices when combined. Motor power can be adjusted. Other modifications are negotiable, such as rotor adaptations (e.g., 5 rows of blades or heavy-duty version). Delivery/timeframe to be coordinated. Please call or email us to discuss or if you have any questions. Kindly respond with your name, company name, and correct phone number. Without this information, RSS Recycling Shredders and Solutions (Netherlands) will not be able to respond.

Stanje: novo, Klanke Supercut roll slitter for efficient cutting of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord Laedpfx Ajn I Rgpol Nja - Siemens PLC Technical data: Knife length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 tons Made to order Price and further information upon request. We are happy to provide you with a non-binding quotation.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour Ljdpfx Aovf E Avjl Noaa bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: novo, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor cutting circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen flap locking system for foreign material discharge Laedpebq St Hefx Al Noa Weight: approx. 18,500 kg

Leto izdelave: 2000, stanje: skoraj kot novo (rabljeno), Continuous furnace PADELTTHERM Model: ROH 50 X 15 X 150 – E Wiring diagram no.: 6 – 16 -4. Bp Order no.: 9070/4 Year of manufacture: 2000 Rated voltage: 400 V (three-phase) Control voltage: 230 V Rated power: 32 kW Protection class: IP 54 Rated current: 58 A Lajdpfx Aljcn Tr Ie Noa Max. temperature: 1050°C Weight: 2,250 kg Very little used in a university setting.

Stanje: pripravljen za uporabo (rabljen), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, with design as reinforced steel/welded construction and documentation. Inspection is possible. Year of manufacture unknown, comprehensively overhauled in 2022. Lsdpfx Alen Tpmus Noaa

Leto izdelave: 2022, stanje: novo, Complete solution for conveying bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angle conveyor belt including supporting structure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Bend angle steplessly adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (movable) Conveyor belt width 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. Laodpfx Ajilg U Ejl Noa PU conveyor belt with cleats and corrugated sidewall Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive supplied ready for connection, motor controller optional 8x adjustable machine feet for alignment Corrugated edge: 50x30 mm T-40 cleats - 300 mm pitch 2-ply for maximum cross-stability We always have various systems of this type in stock. The lead time for a customized system is currently around 2–3 weeks, depending on the production effort. Our core competence lies in supplying customers exactly what they really need. We work together with our customers to develop customized, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator