Univerzalni obdelovalni center

KERN HSPC EVO

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Rsdet Hxamspfx Abhsn Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A 3-axis precision milling machine, DMG Mori, is available. Travel path X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions (X/Y/Z): approx. 1800mm/1550mm/1850mm, weight: approx. 2,200kg, control unit: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Rsdpfx Absvi N D Sshon

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. Rjdpfx Ajf Sqfqsbhen ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 250 h, Lapping stroj Stähli FLM 750 Proizvajalec: Stähli Läpp Technik AG Tip: FLM 750 Leto izdelave: 2013 Napetost/Frekvenca: 3x400V + N + PE / 50Hz Poraba moči: 11,5 kW Maksimalni tok: 25 A Teža: 2500 kg Premer rotacijskega stola: 750 mm Notranji premer izravnalnega obroča: 300 mm Hitrost vrtenja: 6–75 obr/min Pogon moči: 4,0 kW Pnevmatični cilindri: 3 kosi Dovod stisnjenega zraka: 6–10 bar Dimenzije: 1700 x 1250 x 2200 mm Raven hrupa: Rsdpfx Abjxpnnxjhon

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm Rodpswwl Iujfx Abhjn --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodam rabljeni Kellenberger okrogel brusilni stroj v zelo dobrem stanju. Cena močno znižana !!!!! Rsdpfxjw Dzbdo Abhon

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Splošni podatki Teža stroja: 680 kg Premiki Premik po X-osi: 304 mm Premik po Z-osi: 305 mm Premik po Y-osi: 254 mm Glavni pogon Število osi: 5 Hitrost vretena: 30.000 obr/min Moč motorja vretena: 3,7 kW Miza Obremenitev mize: 68 kg Rodpfx Aox D Ip Ssbhon Ta 5-osni stroj HAAS OM-2A je bil izdelan leta 2013 in ima konfiguracijo 3+2, hitrost vretena 30.000 obr/min ter moč motorja 3,7 kW. Opremljen je z avtomatskim menjalcem orodij za 20 orodij in omogoča največjo obremenitev mize do 68 kg. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju HAAS OM-2A, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste aplikacij Rezkanje

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 475 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vrtenja: 42.000 obr/min, premer mize: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured in our facility. The machine once again meets original factory tolerances! Working Area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance Height: 500 mm Tool Changer: 52 positions Redpfx Aovvlmcobhsn Spindle: HSK40E, max. 42,000 rpm Tool Measurement Laser for tool calibration Handheld Control Unit Minimum Quantity Lubrication Prepared for extraction system (e.g. for graphite machining) Spindle Compensation Precision Package CNC Control: Röders RMS6, latest version The machine can be viewed in operational condition at any time. For more information about the type and scope of our refurbished machines, please visit our website or our Hüttmann YouTube channel.

Leto izdelave: 2005, Stanje: rabljeno, Unladen weight: 10,000 kg Dimensions (L x W x H): 220 x 270 x 250 cm Price: On request Numerous accessories included! Included - Probe Included - 3 clamps - Year of manufacture: 2005 - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: 16286 - Control: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 - Tool holder: BT40 - Max. spindle speed [rpm]: 15,000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) Redpfx Aboxdc Szshen - Transport weight [kg]: 10,000kg - Number of transport packages [pcs]: 3 Financial information VAT: The price stated is net plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. Rsdpot Hw H Esfx Abhsn We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!