NC feed Kot nov

Keproma AG POD 80-600

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: Csdohigmbspfx Afnsgp High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment Cjdegpxc Sopfx Afnogp - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Cgodscxxx Ropfx Afnep Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Cgedjg U Utvepfx Afnsp Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: rabljeno, Leto izdelave: 1996, Maximum punching force: 55 t Notching: 10 mm Hole diameter and thickness: 40 x 10 mm Flat steel: 300 x 15 mm or 200 x 20 mm Angle steel 90°: 120 x 120 x 10 mm Angle steel 45°: 70 x 70 x 7 mm Cgodewgkq Topfx Afnsp Round bar: 40 mm Square bar: 40 mm Strokes per minute at 20 mm stroke: 37 /min Throat depth: 250 mm Machine weight approx.: 1,800 kg

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Codpfxjfn Aqlo Afnogp Total power requirement kW Machine weight approx. t Space requirement approx. m motorized decoiler

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Hod: 30 - 140 mm Nastavitev bata: 105 mm Cgodpfx Asd A Hbcjfnep Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo.

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Cjdpfxjz H Dys Afnogp Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clear space between frame walls: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Cgsdovuun Tjpfx Afnjp Clear distance between tie rods: 940 mm Lateral pass-through: 900 mm

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, tested, and newly painted. Cgedpfxsfn Aqmo Afnop