Prednastavljalec orodja

Kelch Trabant 351

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Nkedeh A Sfdopfx Adyet Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Njdpfow Hnr Iex Adyskt Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Potreben prostor pribl. 1,80 x 1,70 x 1,30 m - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) - s pnevmatsko ločevalno loputo

Stanje: novo, Fastech 3-Roll Plate Bending Machine FRS 2050 x 140 Technical specifications: Njdpehzq D Hjfx Adyskt Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Motorized lower roll adjustment • 2 x digital readout Sheet width: 2050 mm Sheet thickness: max. 4.5 mm Pre-bending thickness: 4.0 mm Roll length: 2050 mm Roll diameter: 140 mm Minimum bending diameter: 210 mm Weight: 1530 kg Dimensions (L x W x H): 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: • Electrically driven top and bottom rolls • Swing-out top roll • Conical bending device • Asymmetric roll arrangement • Self-braking main motor • Separate control and operating panel • Safety cable • Values refer to St-37 / 240 N/mm² • CE mark

Stanje: dober (rabljeno), The following listed driven tools VDI 50 are suitable for a SAUTER tool turret and are in good condition and fully functional, having been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, brands NACKE + WTO, VDI 50 for SAUTER tool turret: Item no.: XVI 24275 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item no.: XVI 24277 1 drilling/milling unit, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, Njdpfebql S Hsx Adyskt SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling/milling unit, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: omejena funkcionalnost, prehod palice: 51 mm, skupna masa: 6.000 kg, capacità barra 51 mm - tre torrette - tre assi Y - portautensili fissi/rotanti - caricatore barre LNS Sprint 552 nuovo nel 2011 - controllo Fanuc Nedpfx Aewvvyrodyokt

Stanje: rabljeno, Leto izdelave: 2015, x-travel 600 mm y-travel 800 mm z-travel 600 mm Accuracy 1.7 + L μ Temperature range 20 °C Machine weight approx. 1200 kg Nkedpjvu E Rlsfx Adyst Space requirement approx. 1319 x 1940 x 2710 mm Gantry measuring machine on granite measurement plate with high precision, high-accuracy precision guides, wear-free air bearings, contactless scale system on all axes 0.1 μm, as well as with 3-axis CNC control, joystick, PH10M rotary/swivel head, measuring probe scanning kit 2 + scanning module kit. Dell OptiPlex system PC with LED monitor, keyboard, laser printer, and software for graphical representation of form deviation, assistant for generating movement paths, simulation model, Excel protocol output, statistics module. Flexible change system for storing the scanning modules. As is well known, measuring machines must be professionally dismantled by a specialized company and transported with special equipment. For this, a cost factor of approx. 3,500 EUR + VAT must be considered. The machine has already been dismantled, properly secured on pallets, and certified. It is now located in our warehouse. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 82-N-001, Offer 24248 Technical Specifications: - Max. working width: 3050 mm - Max. sheet thickness: 5 - 6 mm - Roll diameter: 200 mm - Stroke of front roll: 200 mm - Working speed: 4 m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements approx.: W 4900 x D 1300 x H 1400 mm Nksdpfxotu Ul Ro Adyet - Weight approx.: 5.0 t - with: - two powered rolls - both lower rolls motorized and adjustable - pre-bending device - swing-out bearing for swiveling the top roll - extended roll ends for fitting profile rolls - forward and reverse operation - separate mobile control panel with foot pedal and digital display

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Hod: 30 - 140 mm Nastavitev bata: 105 mm Nkodpfx Aded A Hbcjyet Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo.

Stanje: rabljeno, Leto izdelave: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm Control HEIDENHAIN TNC 360 Total power requirement / kW Machine weight approx. / t Nksdpfov H Ertex Adyst Space requirement approx. / m

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Nsdpfot Hw S Ijx Adyekt Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.